Re: Crash on reading the whole PCI config of PIIX4 SMBus

[Jean Delvare <khali@linux-fr.org>]

On Wed, 23 Sep 2009 14:59:08 +0200, Henrik Kretzschmar wrote:
> Wolfram Sang schrieb:
> > On Tue, Sep 22, 2009 at 05:46:10PM +0200, Henrik Kretzschmar wrote:
> >
> >   
> >> at boot time my system (Wincor/Nixdorf Beetle D1) sometimes crashs while loading the i2c-piix4 driver.
> >>     
> >
> > Have you checked if you have the latest BIOS for this machine? Sometimes
> > PCI-problems got fixed there...
> >
> >   
> Thanks for you fast replies,
> 
> the latest BIOS (05/08) is already installed, so no fixing can be expected that way
> 
> 
> I tested my killer-commands at the other box @home with no crashes.
> 
> The commands _work_ with a coldstarted Linux and i2c-piix not loaded,
> so the only thing I can do is blacklisting it and renounce sensors support,
> having a good a argument for a new hardware aquisition. :)

That's really odd, considering that the i2c-piix4 driver doesn't change
the PCI device configuration, it only reads from it.

If you trigger some transactions (for example by running "sensors -s"
at boot time?) then you also write to the I/O ports. But this hardly
explains how subsequently reading the PCI config space would crash.

You might still want to check if maybe ACPI is interfering with the
i2c-piix4 driver. This isn't the kind of result I'd expect, but who
knows.

> 
> For completness the message with the SMBus revision, which is not the pci-revision, is:
> 
> SMBus Host Controller at 0x1040, revision 0

Revision 0 here as well, I suspect there never was any other revision
of this chip.

> 
> 
> The "?" at the interrupt line of lspci is a little strange:
> 
> >> Interrupt: pin ? routed to IRQ 9
> 
> looking at lspci -x -s 7.3 I can see that PCI_INTERRUPT_PIN == 0 
> 
> I cant see that i2p-piix does any interrupts, refering /proc/irq/9/spurious
> 
> The driver says:
>  
> Using Interrupt SMI# for SMBus

This is only a debug message, saying how the interrupt line is
configured, but you are right that the driver doesn't use interrupts
(much to our shame.)

> 
> I'm not sure, but my box @home has the same lspci output with the "?".
> 
> So long, thanks for help.

-- 
Jean Delvare
http://khali.linux-fr.org/wishlist.html