Re: [PATCH] i2c/chips: move ds1682 to drivers/misc

[Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>]

Hi Wolfram,

On Thu,  8 Oct 2009 00:31:50 +0200, Wolfram Sang wrote:
> As i2c/chips is deprecated, move ds1682 to a more apropriate location.
> Build tested.
> 
> Signed-off-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
> ---
>  drivers/i2c/chips/Kconfig  |   10 --
>  drivers/i2c/chips/Makefile |    1 -
>  drivers/i2c/chips/ds1682.c |  267 --------------------------------------------
>  drivers/misc/Kconfig       |   10 ++
>  drivers/misc/Makefile      |    1 +
>  drivers/misc/ds1682.c      |  267 ++++++++++++++++++++++++++++++++++++++++++++
>  6 files changed, 278 insertions(+), 278 deletions(-)
>  delete mode 100644 drivers/i2c/chips/ds1682.c
>  create mode 100644 drivers/misc/ds1682.c

Thanks. Applied with one fix:

> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -246,6 +246,16 @@ config EP93XX_PWM
>  	  To compile this driver as a module, choose M here: the module will
>  	  be called ep93xx_pwm.
>  
> +config DS1682
> +	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
> +	depends on EXPERIMENTAL

Depends on I2C too.

> +	help
> +	  If you say yes here you get support for Dallas Semiconductor
> +	  DS1682 Total Elapsed Time Recorder.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called ds1682.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"

-- 
Jean Delvare