[PATCH v2 0/3] i2c-designware: Allow mixed endianness

[PATCH v2 0/3] i2c-designware: Allow mixed endianness

[Jean-Hugues Deschenes]

This is the v2 version of the patch which adds support
for the i2c Designware controller when its endianness
differs from that of the cpu.

---
Changelog v1->v2
- rename i2c_dw_(read|write)l to dw_(read|write)l (Shinya Kuribayashi)
- rename dw_(read|write)l's addr argument to offset (Shinya Kuribayashi)
- replace (if constant == x) with (if x == constant) (Ben Dooks)
---


Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes-YGVykHU+fedBDgjK7y7TUQ@public.gmane.org>


-- 

[PATCH v2 1/3] i2c-designware: Use local version of readl & writel

[Jean-Hugues Deschenes]

[-- Attachment #1: use_local_readl_writel --]
[-- Type: text/plain, Size: 8275 bytes --]

Use local versions of readl & writel, so per-access manipulations may be performed

Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes-YGVykHU+fedBDgjK7y7TUQ@public.gmane.org>

---
 drivers/i2c/busses/i2c-designware.c |   88 ++++++++++++++++++++----------------
 1 file changed, 49 insertions(+), 39 deletions(-)

Index: linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
===================================================================
--- linux-2.6_i2c.orig/drivers/i2c/busses/i2c-designware.c
+++ linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
@@ -219,6 +219,16 @@ struct dw_i2c_dev {
 	unsigned int		rx_fifo_depth;
 };
 
+static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+	return readl(dev->base + offset);
+}
+
+static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+	writel(b, dev->base + offset);
+}
+
 static u32
 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 {
@@ -288,7 +298,7 @@ static void i2c_dw_init(struct dw_i2c_de
 	u32 ic_con, hcnt, lcnt;
 
 	/* Disable the adapter */
-	writel(0, dev->base + DW_IC_ENABLE);
+	dw_writel(dev, 0, DW_IC_ENABLE);
 
 	/* set standard and fast speed deviders for high/low periods */
 
@@ -302,8 +312,8 @@ static void i2c_dw_init(struct dw_i2c_de
 				47,	/* tLOW = 4.7 us */
 				3,	/* tf = 0.3 us */
 				0);	/* No offset */
-	writel(hcnt, dev->base + DW_IC_SS_SCL_HCNT);
-	writel(lcnt, dev->base + DW_IC_SS_SCL_LCNT);
+	dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
 	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
 	/* Fast-mode */
@@ -316,18 +326,18 @@ static void i2c_dw_init(struct dw_i2c_de
 				13,	/* tLOW = 1.3 us */
 				3,	/* tf = 0.3 us */
 				0);	/* No offset */
-	writel(hcnt, dev->base + DW_IC_FS_SCL_HCNT);
-	writel(lcnt, dev->base + DW_IC_FS_SCL_LCNT);
+	dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
 	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
 	/* Configure Tx/Rx FIFO threshold levels */
-	writel(dev->tx_fifo_depth - 1, dev->base + DW_IC_TX_TL);
-	writel(0, dev->base + DW_IC_RX_TL);
+	dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
+	dw_writel(dev, 0, DW_IC_RX_TL);
 
 	/* configure the i2c master */
 	ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
 		DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
-	writel(ic_con, dev->base + DW_IC_CON);
+	dw_writel(dev, ic_con, DW_IC_CON);
 }
 
 /*
@@ -337,7 +347,7 @@ static int i2c_dw_wait_bus_not_busy(stru
 {
 	int timeout = TIMEOUT;
 
-	while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+	while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
 		if (timeout <= 0) {
 			dev_warn(dev->dev, "timeout waiting for bus ready\n");
 			return -ETIMEDOUT;
@@ -355,24 +365,24 @@ static void i2c_dw_xfer_init(struct dw_i
 	u32 ic_con;
 
 	/* Disable the adapter */
-	writel(0, dev->base + DW_IC_ENABLE);
+	dw_writel(dev, 0, DW_IC_ENABLE);
 
 	/* set the slave (target) address */
-	writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+	dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
 
 	/* if the slave address is ten bit address, enable 10BITADDR */
-	ic_con = readl(dev->base + DW_IC_CON);
+	ic_con = dw_readl(dev, DW_IC_CON);
 	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
 		ic_con |= DW_IC_CON_10BITADDR_MASTER;
 	else
 		ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
-	writel(ic_con, dev->base + DW_IC_CON);
+	dw_writel(dev, ic_con, DW_IC_CON);
 
 	/* Enable the adapter */
-	writel(1, dev->base + DW_IC_ENABLE);
+	dw_writel(dev, 1, DW_IC_ENABLE);
 
 	/* Enable interrupts */
-	writel(DW_IC_INTR_DEFAULT_MASK, dev->base + DW_IC_INTR_MASK);
+	dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
 }
 
 /*
@@ -419,15 +429,15 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 			buf_len = msgs[dev->msg_write_idx].len;
 		}
 
-		tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
-		rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+		tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
+		rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
 
 		while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
 			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
-				writel(0x100, dev->base + DW_IC_DATA_CMD);
+				dw_writel(dev, 0x100, DW_IC_DATA_CMD);
 				rx_limit--;
 			} else
-				writel(*buf++, dev->base + DW_IC_DATA_CMD);
+				dw_writel(dev, *buf++, DW_IC_DATA_CMD);
 			tx_limit--; buf_len--;
 		}
 
@@ -452,7 +462,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	if (dev->msg_err)
 		intr_mask = 0;
 
-	writel(intr_mask, dev->base + DW_IC_INTR_MASK);
+	dw_writel(dev, intr_mask, DW_IC_INTR_MASK);
 }
 
 static void
@@ -476,10 +486,10 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 			buf = dev->rx_buf;
 		}
 
-		rx_valid = readl(dev->base + DW_IC_RXFLR);
+		rx_valid = dw_readl(dev, DW_IC_RXFLR);
 
 		for (; len > 0 && rx_valid > 0; len--, rx_valid--)
-			*buf++ = readl(dev->base + DW_IC_DATA_CMD);
+			*buf++ = dw_readl(dev, DW_IC_DATA_CMD);
 
 		if (len > 0) {
 			dev->status |= STATUS_READ_IN_PROGRESS;
@@ -562,7 +572,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, st
 	/* no error */
 	if (likely(!dev->cmd_err)) {
 		/* Disable the adapter */
-		writel(0, dev->base + DW_IC_ENABLE);
+		dw_writel(dev, 0, DW_IC_ENABLE);
 		ret = num;
 		goto done;
 	}
@@ -606,7 +616,7 @@ static u32 i2c_dw_read_clear_intrbits(st
 	 *
 	 * The raw version might be useful for debugging purposes.
 	 */
-	stat = readl(dev->base + DW_IC_INTR_STAT);
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
 
 	/*
 	 * Do not use the IC_CLR_INTR register to clear interrupts, or
@@ -616,31 +626,31 @@ static u32 i2c_dw_read_clear_intrbits(st
 	 * Instead, use the separately-prepared IC_CLR_* registers.
 	 */
 	if (stat & DW_IC_INTR_RX_UNDER)
-		readl(dev->base + DW_IC_CLR_RX_UNDER);
+		dw_readl(dev, DW_IC_CLR_RX_UNDER);
 	if (stat & DW_IC_INTR_RX_OVER)
-		readl(dev->base + DW_IC_CLR_RX_OVER);
+		dw_readl(dev, DW_IC_CLR_RX_OVER);
 	if (stat & DW_IC_INTR_TX_OVER)
-		readl(dev->base + DW_IC_CLR_TX_OVER);
+		dw_readl(dev, DW_IC_CLR_TX_OVER);
 	if (stat & DW_IC_INTR_RD_REQ)
-		readl(dev->base + DW_IC_CLR_RD_REQ);
+		dw_readl(dev, DW_IC_CLR_RD_REQ);
 	if (stat & DW_IC_INTR_TX_ABRT) {
 		/*
 		 * The IC_TX_ABRT_SOURCE register is cleared whenever
 		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
 		 */
-		dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);
-		readl(dev->base + DW_IC_CLR_TX_ABRT);
+		dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
+		dw_readl(dev, DW_IC_CLR_TX_ABRT);
 	}
 	if (stat & DW_IC_INTR_RX_DONE)
-		readl(dev->base + DW_IC_CLR_RX_DONE);
+		dw_readl(dev, DW_IC_CLR_RX_DONE);
 	if (stat & DW_IC_INTR_ACTIVITY)
-		readl(dev->base + DW_IC_CLR_ACTIVITY);
+		dw_readl(dev, DW_IC_CLR_ACTIVITY);
 	if (stat & DW_IC_INTR_STOP_DET)
-		readl(dev->base + DW_IC_CLR_STOP_DET);
+		dw_readl(dev, DW_IC_CLR_STOP_DET);
 	if (stat & DW_IC_INTR_START_DET)
-		readl(dev->base + DW_IC_CLR_START_DET);
+		dw_readl(dev, DW_IC_CLR_START_DET);
 	if (stat & DW_IC_INTR_GEN_CALL)
-		readl(dev->base + DW_IC_CLR_GEN_CALL);
+		dw_readl(dev, DW_IC_CLR_GEN_CALL);
 
 	return stat;
 }
@@ -665,7 +675,7 @@ static irqreturn_t i2c_dw_isr(int this_i
 		 * Anytime TX_ABRT is set, the contents of the tx/rx
 		 * buffers are flushed.  Make sure to skip them.
 		 */
-		writel(0, dev->base + DW_IC_INTR_MASK);
+		dw_writel(dev, 0, DW_IC_INTR_MASK);
 		goto tx_aborted;
 	}
 
@@ -746,14 +756,14 @@ static int __devinit dw_i2c_probe(struct
 		goto err_unuse_clocks;
 	}
 	{
-		u32 param1 = readl(dev->base + DW_IC_COMP_PARAM_1);
+		u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
 
 		dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
 		dev->rx_fifo_depth = ((param1 >> 8)  & 0xff) + 1;
 	}
 	i2c_dw_init(dev);
 
-	writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
+	dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */
 	r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
 	if (r) {
 		dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
@@ -809,7 +819,7 @@ static int __devexit dw_i2c_remove(struc
 	clk_put(dev->clk);
 	dev->clk = NULL;
 
-	writel(0, dev->base + DW_IC_ENABLE);
+	dw_writel(dev, 0, DW_IC_ENABLE);
 	free_irq(dev->irq, dev);
 	kfree(dev);
 

-- 

[PATCH v2 2/3] i2c-designware: Check component type register

[Jean-Hugues Deschenes]

[-- Attachment #1: check_dw_component --]
[-- Type: text/plain, Size: 1154 bytes --]

Designware component type register is checked before attaching to the device.

Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes-YGVykHU+fedBDgjK7y7TUQ@public.gmane.org>

---
 drivers/i2c/busses/i2c-designware.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

Index: linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
===================================================================
--- linux-2.6_i2c.orig/drivers/i2c/busses/i2c-designware.c
+++ linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
@@ -68,6 +68,7 @@
 #define DW_IC_TXFLR		0x74
 #define DW_IC_RXFLR		0x78
 #define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_TYPE		0xfc
 #define DW_IC_TX_ABRT_SOURCE	0x80
 
 #define DW_IC_CON_MASTER		0x1
@@ -756,6 +757,16 @@ static int __devinit dw_i2c_probe(struct
 		goto err_unuse_clocks;
 	}
 	{
+		u32 comp_type = dw_readl(dev, DW_IC_COMP_TYPE);
+
+		if (comp_type != 0x44570140) {
+			dev_err(&pdev->dev, "Unknown Synopsys component type: "
+					"0x%08x\n",	comp_type);
+			r = -ENODEV;
+			goto err_iounmap;
+		}
+	}
+	{
 		u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
 
 		dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;

-- 

[PATCH v2 3/3] i2c-designware: Allow mixed endianness accesses

[Jean-Hugues Deschenes]

[-- Attachment #1: allow_mixed_endianness --]
[-- Type: text/plain, Size: 2176 bytes --]

Allows CPUs of a given endianness to access a dw controller of a different
endianness. Endianncess difference is detected at run time through the dw
component type register.

Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes-YGVykHU+fedBDgjK7y7TUQ@public.gmane.org>

---
 drivers/i2c/busses/i2c-designware.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

Index: linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
===================================================================
--- linux-2.6_i2c.orig/drivers/i2c/busses/i2c-designware.c
+++ linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
@@ -36,6 +36,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/swab.h>
 
 /*
  * Registers offset
@@ -192,6 +193,7 @@ static char *abort_sources[] = {
  * @status: i2c master status, one of STATUS_*
  * @abort_source: copy of the TX_ABRT_SOURCE register
  * @irq: interrupt number for the i2c master
+ * @swab: true if the instantiated IP is of different endianess
  * @adapter: i2c subsystem adapter node
  * @tx_fifo_depth: depth of the hardware tx fifo
  * @rx_fifo_depth: depth of the hardware rx fifo
@@ -215,6 +217,7 @@ struct dw_i2c_dev {
 	unsigned int		status;
 	u32			abort_source;
 	int			irq;
+	int			swab;
 	struct i2c_adapter	adapter;
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
@@ -222,11 +225,19 @@ struct dw_i2c_dev {
 
 static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
 {
-	return readl(dev->base + offset);
+	u32 value = readl(dev->base + offset);
+
+	if (dev->swab)
+		return swab32(value);
+	else
+		return value;
 }
 
 static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
 {
+	if (dev->swab)
+		b = swab32(b);
+
 	writel(b, dev->base + offset);
 }
 
@@ -759,7 +770,9 @@ static int __devinit dw_i2c_probe(struct
 	{
 		u32 comp_type = dw_readl(dev, DW_IC_COMP_TYPE);
 
-		if (comp_type != 0x44570140) {
+		if (comp_type == ___constant_swab32(0x44570140))
+			dev->swab = 1;
+		else if (comp_type != 0x44570140) {
 			dev_err(&pdev->dev, "Unknown Synopsys component type: "
 					"0x%08x\n",	comp_type);
 			r = -ENODEV;

-- 

Re: [PATCH v2 0/3] i2c-designware: Allow mixed endianness

[Shinya Kuribayashi]

Jean-Hugues Deschenes wrote:
> This is the v2 version of the patch which adds support
> for the i2c Designware controller when its endianness
> differs from that of the cpu.
> 
> ---
> Changelog v1->v2
> - rename i2c_dw_(read|write)l to dw_(read|write)l (Shinya Kuribayashi)
> - rename dw_(read|write)l's addr argument to offset (Shinya Kuribayashi)
> - replace (if constant == x) with (if x == constant) (Ben Dooks)
> ---
> 
> 
> Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes-YGVykHU+fedBDgjK7y7TUQ@public.gmane.org>

All three patches look good, and work for my BE machines.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>

---

diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index 362dd9e..ce20fc8 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -778,6 +783,12 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
 			r = -ENODEV;
 			goto err_iounmap;
 		}
+
+		printk("### comp_type = 0x%08x\n", comp_type);
+		printk("### ___constant_swab32(0x44570140) = 0x%08x\n",
+			___constant_swab32(0x44570140));
+		printk("### swab = %d\n", dev->swab);
+
 	}
 	{
 		u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);

[...]

i2c /dev entries driver
### comp_type = 0x44570140
### ___constant_swab32(0x44570140) = 0x40015744
### swab = 0
### comp_type = 0x44570140
### ___constant_swab32(0x44570140) = 0x40015744
### swab = 0
### comp_type = 0x44570140
### ___constant_swab32(0x44570140) = 0x40015744
### swab = 0

-- 
Shinya Kuribayashi
NEC Electronics

Re: [PATCH v2 0/3] i2c-designware: Allow mixed endianness

[Shinya Kuribayashi]

Shinya Kuribayashi wrote:
> Jean-Hugues Deschenes wrote:
>> This is the v2 version of the patch which adds support
>> for the i2c Designware controller when its endianness
>> differs from that of the cpu.
>>
>> ---
>> Changelog v1->v2
>> - rename i2c_dw_(read|write)l to dw_(read|write)l (Shinya Kuribayashi)
>> - rename dw_(read|write)l's addr argument to offset (Shinya Kuribayashi)
>> - replace (if constant == x) with (if x == constant) (Ben Dooks)
>> ---
>>
>>
>> Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes-YGVykHU+fedBDgjK7y7TUQ@public.gmane.org>
> 
> All three patches look good, and work for my BE machines.
> 
> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>

Oops, wrong tag.

Acked-by: Shinya Kuribayashi <shinya.kuribayashi-jaWZhaxaiAMAvxtiuMwx3w@public.gmane.org>

-- 
Shinya Kuribayashi
NEC Electronics

Re: [PATCH v2 2/3] i2c-designware: Check component type register

[Ben Dooks]

On Tue, Jan 19, 2010 at 09:02:36AM -0500, Jean-Hugues Deschenes wrote:
> Designware component type register is checked before attaching to the device.
> 
> Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes-YGVykHU+fedBDgjK7y7TUQ@public.gmane.org>
> 
> ---
>  drivers/i2c/busses/i2c-designware.c |   11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> Index: linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
> ===================================================================
> --- linux-2.6_i2c.orig/drivers/i2c/busses/i2c-designware.c
> +++ linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
> @@ -68,6 +68,7 @@
>  #define DW_IC_TXFLR		0x74
>  #define DW_IC_RXFLR		0x78
>  #define DW_IC_COMP_PARAM_1	0xf4
> +#define DW_IC_COMP_TYPE		0xfc
>  #define DW_IC_TX_ABRT_SOURCE	0x80
>  
>  #define DW_IC_CON_MASTER		0x1
> @@ -756,6 +757,16 @@ static int __devinit dw_i2c_probe(struct
>  		goto err_unuse_clocks;
>  	}
>  	{
> +		u32 comp_type = dw_readl(dev, DW_IC_COMP_TYPE);
> +
> +		if (comp_type != 0x44570140) {
> +			dev_err(&pdev->dev, "Unknown Synopsys component type: "
> +					"0x%08x\n",	comp_type);
> +			r = -ENODEV;
> +			goto err_iounmap;
> +		}
> +	}

having looked at the code around here, let's just use a single
u32 reg or u32 val field at the top of dw_i2c_probe and avoid the
need for the {} blocks in the probe.

Would like to see a patch fixing this added to the series.

> +	{
>  		u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
>  
>  		dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
> 
> -- 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'

Re: [PATCH v2 0/3] i2c-designware: Allow mixed endianness

[Ben Dooks]

On Tue, Jan 19, 2010 at 09:02:34AM -0500, Jean-Hugues Deschenes wrote:
> 
> This is the v2 version of the patch which adds support
> for the i2c Designware controller when its endianness
> differs from that of the cpu.

apart from the one comment on the {}. the rest is fine.
 
> ---
> Changelog v1->v2
> - rename i2c_dw_(read|write)l to dw_(read|write)l (Shinya Kuribayashi)
> - rename dw_(read|write)l's addr argument to offset (Shinya Kuribayashi)
> - replace (if constant == x) with (if x == constant) (Ben Dooks)
> ---
> 
> 
> Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes-YGVykHU+fedBDgjK7y7TUQ@public.gmane.org>
> 
> 
> -- 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'