From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>,
Dirk Behme <dirk.behme-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>,
Sudhakar Rajashekhara <sudhakar.raj-l0cyMroinI0@public.gmane.org>,
Alexander Vasiliev
<alexvasiljev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Brad Griffis <bgriffis-l0cyMroinI0@public.gmane.org>,
Dirk Behme <dirk.behme-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Jean Delvare (PC drivers,
core)" <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
Chaithrika U S <chaithrika-l0cyMroinI0@public.gmane.org>,
Philby John <pjohn-k0rHJ+Hhz/SB+jHODAdFcQ@public.gmane.org>,
"Srinivasan, Nageswari" <nageswari-l0cyMroinI0@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/6] i2c: davinci: Fix smbus Oops with AIC33 usage
Date: Tue, 20 Apr 2010 01:05:30 +0100 [thread overview]
Message-ID: <20100420000530.GJ32401@fluff.org.uk> (raw)
In-Reply-To: <1270575738-22388-2-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
On Tue, Apr 06, 2010 at 10:42:13AM -0700, Kevin Hilman wrote:
> From: Dirk Behme <dirk.behme-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
>
> This fixes Oops at kernel startup while "scanning" for TLV320AIC23IDx
> addresses.
this looks like it could be a candidate for -rc?
> Additional fix from Sudhakar Rajashekhara: I think 'first byte set'
> should come after the write because an I2C transaction is being
> carried out before configuring the I2C mode register (which has bits
> to configure Master, Start condition etc), which causes undefined
> behavior.
>
> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj-l0cyMroinI0@public.gmane.org>
> Signed-off-by: Alexander Vasiliev <alexvasiljev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Brad Griffis <bgriffis-l0cyMroinI0@public.gmane.org>
> Signed-off-by: Dirk Behme <dirk.behme-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Acked-by: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
> ---
> drivers/i2c/busses/i2c-davinci.c | 31 +++++++++++++++++++++++++++----
> 1 files changed, 27 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
> index c89687a..3b9ab23 100644
> --- a/drivers/i2c/busses/i2c-davinci.c
> +++ b/drivers/i2c/busses/i2c-davinci.c
> @@ -112,6 +112,7 @@ struct davinci_i2c_dev {
> u8 *buf;
> size_t buf_len;
> int irq;
> + int stop;
> u8 terminate;
> struct i2c_adapter adapter;
> };
> @@ -249,9 +250,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
> u16 w;
> int r;
>
> - if (msg->len == 0)
> - return -EINVAL;
> -
> if (!pdata)
> pdata = &davinci_i2c_platform_data_default;
> /* Introduce a delay, required for some boards (e.g Davinci EVM) */
> @@ -263,6 +261,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
>
> dev->buf = msg->buf;
> dev->buf_len = msg->len;
> + dev->stop = stop;
>
> davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
>
> @@ -280,6 +279,10 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
> flag |= DAVINCI_I2C_MDR_TRX;
> if (stop)
> flag |= DAVINCI_I2C_MDR_STP;
> + if (msg->len == 0) {
> + flag |= DAVINCI_I2C_MDR_RM;
> + flag &= ~DAVINCI_I2C_MDR_STP;
> + }
>
> /* Enable receive or transmit interrupts */
> w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
> @@ -290,9 +293,21 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
> davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
>
> dev->terminate = 0;
> +
> /* write the data into mode register */
> davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
>
> + /*
> + * First byte should be set here, not after interrupt,
> + * because transmit-data-ready interrupt can come before
> + * NACK-interrupt during sending of previous message and
> + * ICDXR may have wrong data
> + */
> + if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
> + davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
> + dev->buf_len--;
> + }
> +
> r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
> dev->adapter.timeout);
> if (r == 0) {
> @@ -371,7 +386,7 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
>
> static u32 i2c_davinci_func(struct i2c_adapter *adap)
> {
> - return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> }
>
> static void terminate_read(struct davinci_i2c_dev *dev)
> @@ -430,6 +445,14 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
> case DAVINCI_I2C_IVR_ARDY:
> davinci_i2c_write_reg(dev,
> DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
> + if (((dev->buf_len == 0) && (dev->stop != 0)) ||
> + (dev->cmd_err & DAVINCI_I2C_STR_NACK)) {
> + w = davinci_i2c_read_reg(dev,
> + DAVINCI_I2C_MDR_REG);
> + w |= DAVINCI_I2C_MDR_STP;
> + davinci_i2c_write_reg(dev,
> + DAVINCI_I2C_MDR_REG, w);
> + }
> complete(&dev->cmd_complete);
> break;
>
> --
> 1.7.0.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2010-04-20 0:05 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-06 17:42 [PATCH 0/6] i2c: davinci updates for 2.6.35 Kevin Hilman
[not found] ` <1270575738-22388-1-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-04-06 17:42 ` [PATCH 1/6] i2c: davinci: Fix smbus Oops with AIC33 usage Kevin Hilman
[not found] ` <1270575738-22388-2-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-04-20 0:05 ` Ben Dooks [this message]
2010-04-06 17:42 ` [PATCH 2/6] i2c: davinci: misc. cleanups: remove MOD_REG_BIT and IO_ADDRESS usage Kevin Hilman
2010-04-06 17:42 ` [PATCH 3/6] i2c: davinci: Add helper functions for power management Kevin Hilman
2010-04-06 17:42 ` [PATCH 4/6] i2c: davinci: Add suspend/resume support Kevin Hilman
2010-04-06 17:42 ` [PATCH 6/6] i2c: davinci: bus recovery procedure to clear the bus Kevin Hilman
2010-04-20 0:06 ` [PATCH 0/6] i2c: davinci updates for 2.6.35 Ben Dooks
[not found] ` <20100420000621.GK32401-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2010-04-20 13:55 ` Kevin Hilman
2010-06-21 20:16 ` Kevin Hilman
[not found] ` <AANLkTikJ6XDywcBA5O0mC85jQEIWxZ9NOALIQOjcGCDJ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-08-10 15:56 ` Kevin Hilman
[not found] ` <AANLkTinNXxzCoH+b3=xA92sW8GCqqO4iY+_yVwBFLMqG-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-08-10 23:44 ` Ben Dooks
2010-04-06 17:42 ` [PATCH 5/6] i2c: davinci: Add cpufreq support Kevin Hilman
-- strict thread matches above, loose matches on Subject: below --
2010-01-26 23:41 [PATCH 0/6] davinci i2c updates for 2.6.34 Kevin Hilman
[not found] ` <1264549293-25556-1-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-01-26 23:41 ` [PATCH 1/6] i2c: davinci: Fix smbus Oops with AIC33 usage Kevin Hilman
[not found] ` <1264549293-25556-2-git-send-email-khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-01-27 13:24 ` Sudhakar Rajashekhara
2010-01-27 15:03 ` Ben Dooks
[not found] ` <026601ca9f54$17a18110$46e48330$@raj@ti.com>
[not found] ` <026601ca9f54$17a18110$46e48330$@raj-l0cyMroinI0@public.gmane.org>
2010-01-27 14:50 ` Kevin Hilman
[not found] ` <87k4v3y53z.fsf-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
2010-01-28 4:05 ` Sudhakar Rajashekhara
2010-01-28 8:46 ` Sudhakar Rajashekhara
[not found] ` <02ee01ca9ff6$53cf0d90$fb6d28b0$@raj@ti.com>
[not found] ` <02ee01ca9ff6$53cf0d90$fb6d28b0$@raj-l0cyMroinI0@public.gmane.org>
2010-01-28 14:45 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100420000530.GJ32401@fluff.org.uk \
--to=ben-linux-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
--cc=alexvasiljev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=bgriffis-l0cyMroinI0@public.gmane.org \
--cc=chaithrika-l0cyMroinI0@public.gmane.org \
--cc=dirk.behme-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=dirk.behme-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nageswari-l0cyMroinI0@public.gmane.org \
--cc=pjohn-k0rHJ+Hhz/SB+jHODAdFcQ@public.gmane.org \
--cc=sudhakar.raj-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).