linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ben Dooks <ben-linux@fluff.org>
To: Mike Frysinger <vapier@gentoo.org>
Cc: linux-i2c@vger.kernel.org, Ben Dooks <ben-linux@fluff.org>,
	linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	uclinux-dist-devel@blackfin.uclinux.org,
	Michael Hennerich <michael.hennerich@analog.com>
Subject: Re: [PATCH] i2c-bfin-twi: handle faulty slave devices better
Date: Sun, 9 May 2010 12:34:20 +0100	[thread overview]
Message-ID: <20100509113420.GB2589@trinity.fluff.org> (raw)
In-Reply-To: <1273403087-3326-1-git-send-email-vapier@gentoo.org>

On Sun, May 09, 2010 at 07:04:47AM -0400, Mike Frysinger wrote:
> From: Michael Hennerich <michael.hennerich@analog.com>
> 
> Faulty slave devices might drive SDA low after a transfer finishes.  So,
> when this scenario is detected, have the master generate up to 8 extra
> clocks until the SDA is properly released.
> 
> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
> ---
> Note: this requires the existing Blackfin TWI patches already sent out

hmm, it is late in the -rc series for anything other than critical
bugfixes, will update series tomorrow.
 
>  drivers/i2c/busses/i2c-bfin-twi.c |   22 ++++++++++++++++++++++
>  1 files changed, 22 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
> index fb26e5c..f9c05e1 100644
> --- a/drivers/i2c/busses/i2c-bfin-twi.c
> +++ b/drivers/i2c/busses/i2c-bfin-twi.c
> @@ -20,6 +20,7 @@
>  #include <linux/completion.h>
>  #include <linux/interrupt.h>
>  #include <linux/platform_device.h>
> +#include <linux/delay.h>
>  
>  #include <asm/blackfin.h>
>  #include <asm/portmux.h>
> @@ -159,6 +160,27 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
>  		if (mast_stat & BUFWRERR)
>  			dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
>  
> +		/* Faulty salve devices, may drive SDA low after a transfer
spello: slave

> +		 * finishes. To release the bus this code generates up to 8
> +		 * extra clocks until SDA is released.
> +		 */
> +
> +		if (read_MASTER_STAT(iface) & SDASEN) {
> +			int cnt = 8;
> +			do {
> +				write_MASTER_CTL(iface, SCLOVR);
> +				udelay(6);
> +				write_MASTER_CTL(iface, 0);
> +				udelay(6);
> +			} while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
> +
> +			write_MASTER_CTL(iface, SDAOVR | SCLOVR);
> +			udelay(6);
> +			write_MASTER_CTL(iface, SDAOVR);
> +			udelay(6);
> +			write_MASTER_CTL(iface, 0);
> +		}
> +
>  		/* If it is a quick transfer, only address without data,
>  		 * not an err, return 1.
>  		 */
> -- 
> 1.7.1
> 

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.

  reply	other threads:[~2010-05-09 11:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-09 11:04 [PATCH] i2c-bfin-twi: handle faulty slave devices better Mike Frysinger
2010-05-09 11:34 ` Ben Dooks [this message]
     [not found]   ` <20100509113420.GB2589-SMNkleLxa3Z6Wcw2j4pizdi2O/JbrIOy@public.gmane.org>
2010-05-09 18:23     ` Mike Frysinger
     [not found] ` <1273403087-3326-1-git-send-email-vapier-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org>
2010-05-10 15:33   ` [PATCH v2] " Mike Frysinger
     [not found]     ` <1273505624-30920-1-git-send-email-vapier-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org>
2010-05-11 23:09       ` Ben Dooks
     [not found]         ` <20100511230901.GA31325-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2010-05-12  0:03           ` Mike Frysinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100509113420.GB2589@trinity.fluff.org \
    --to=ben-linux@fluff.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    --cc=uclinux-dist-devel@blackfin.uclinux.org \
    --cc=vapier@gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).