From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [PATCH] EG20T: Update PCH_I2C driver to 2.6.36 Date: Tue, 9 Nov 2010 09:29:44 +0100 Message-ID: <20101109092944.0670d428@endymion.delvare> References: <4CD8CD32.5000909@dsn.okisemi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: "Wang, Qi" , "Ben Dooks (embedded platforms)" Cc: "Khor, Andrew Chih Howe" , "Wang, Yong Y" , "Ewe, Kok Howg" , Tomoya MORINAGA , Samuel Ortiz , Linus Walleij , Wolfram Sang , Ralf Baechle , srinidhi kasagar , "linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" List-Id: linux-i2c@vger.kernel.org Hi Qi, Tomoya, On Tue, 9 Nov 2010 13:21:11 +0800, Wang, Qi wrote: > Hi Jean, >=20 > I verified this driver at our development board, and it passed our te= st programming. There's no functionality issue now. Also we together po= lish this code again. >=20 > Would you please accept this driver? As you put this driver in the "embedded" section of the menu, I'd rather leave it to Ben Dooks to pick it. Ben? >=20 > Best Regards, > Qi. >=20 > > -----Original Message----- > > From: Tomoya MORINAGA [mailto:tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org] > > Sent: Tuesday, November 09, 2010 12:25 PM > > To: Jean Delvare (PC drivers, core); Ben Dooks (embedded platforms)= ; Samuel > > Ortiz; Linus Walleij; Wolfram Sang; Ralf Baechle; srinidhi kasagar; > > linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > > Cc: Wang, Qi; Khor, Andrew Chih Howe; Wang, Yong Y; Ewe, Kok Howg > > Subject: [PATCH] EG20T: Update PCH_I2C driver to 2.6.36 > > > > Hi Jean, > > > > I have got Intel's signature. > > Please push it to kernel tree. > > > > Thanks, > > Tomoya MORINAGA(OKI SEMICONDUCTOR CO., LTD.) > > --- > > I2C driver of EG20T PCH > > > > EG20T PCH is the platform controller hub that is going to be used i= n > > Intel's upcoming general embedded platform. All IO peripherals in > > EG20T PCH are actually devices sitting on AMBA bus. > > EG20T PCH has I2C I/F. Using this I/F, it is able to access system > > devices connected to I2C. > > > > Signed-off-by: Tomoya MORINAGA > > Reviewed-by: Linus Walleij > > Signed-off-by: Qi Wang > > --- > > drivers/i2c/busses/Kconfig | 8 + > > drivers/i2c/busses/Makefile | 1 + > > drivers/i2c/busses/i2c-eg20t.c | 900 > > ++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 909 insertions(+), 0 deletions(-) > > create mode 100644 drivers/i2c/busses/i2c-eg20t.c > > > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfi= g > > index 6539ac2..fcce69c 100644 > > --- a/drivers/i2c/busses/Kconfig > > +++ b/drivers/i2c/busses/Kconfig > > @@ -627,6 +627,14 @@ config I2C_XILINX > > This driver can also be built as a module. If so, the modu= le > > will be called xilinx_i2c. > > > > +config I2C_EG20T > > + tristate "PCH I2C of Intel EG20T" > > + depends on PCI > > + help > > + This driver is for PCH(Platform controller Hub) I2C of E= G20T which > > + is an IOH(Input/Output Hub) for x86 embedded processor. > > + This driver can access PCH I2C bus device. > > + > > comment "External I2C/SMBus adapter drivers" > > > > config I2C_PARPORT > > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makef= ile > > index c3ef492..e55e051 100644 > > --- a/drivers/i2c/busses/Makefile > > +++ b/drivers/i2c/busses/Makefile > > @@ -60,6 +60,7 @@ obj-$(CONFIG_I2C_STU300) +=3D i2c-stu300.o > > obj-$(CONFIG_I2C_VERSATILE) +=3D i2c-versatile.o > > obj-$(CONFIG_I2C_OCTEON) +=3D i2c-octeon.o > > obj-$(CONFIG_I2C_XILINX) +=3D i2c-xiic.o > > +obj-$(CONFIG_I2C_EG20T) +=3D i2c-eg20t.o > > > > # External I2C/SMBus adapter drivers > > obj-$(CONFIG_I2C_PARPORT) +=3D i2c-parport.o > > diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2= c-eg20t.c > > new file mode 100644 > > index 0000000..f835635 > > --- /dev/null > > +++ b/drivers/i2c/busses/i2c-eg20t.c > > @@ -0,0 +1,900 @@ > > +/* > > + * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. > > + * > > + * This program is free software; you can redistribute it and/or m= odify > > + * it under the terms of the GNU General Public License as publish= ed by > > + * the Free Software Foundation; version 2 of the License. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public Licen= se > > + * along with this program; if not, write to the Free Software > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111= -1307, > > USA. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define PCH_EVENT_SET 0 /* I2C Interrupt Event Set St= atus */ > > +#define PCH_EVENT_NONE 1 /* I2C Interrupt Event Clear = Status */ > > +#define PCH_MAX_CLK 100000 /* Maximum Clock speed in MHz= */ > > +#define PCH_BUFFER_MODE_ENABLE 0x0002 /* flag for Buffer mo= de > > enable */ > > +#define PCH_EEPROM_SW_RST_MODE_ENABLE 0x0008 /* EEPROM > > SW RST enable flag */ > > + > > +#define PCH_I2CSADR 0x00 /* I2C slave address register */ > > +#define PCH_I2CCTL 0x04 /* I2C control register */ > > +#define PCH_I2CSR 0x08 /* I2C status register */ > > +#define PCH_I2CDR 0x0C /* I2C data register */ > > +#define PCH_I2CMON 0x10 /* I2C bus monitor register */ > > +#define PCH_I2CBC 0x14 /* I2C bus transfer rate setup counte= r */ > > +#define PCH_I2CMOD 0x18 /* I2C mode register */ > > +#define PCH_I2CBUFSLV 0x1C /* I2C buffer mode slave addr= ess > > register */ > > +#define PCH_I2CBUFSUB 0x20 /* I2C buffer mode subaddress= register > > */ > > +#define PCH_I2CBUFFOR 0x24 /* I2C buffer mode format reg= ister */ > > +#define PCH_I2CBUFCTL 0x28 /* I2C buffer mode control re= gister */ > > +#define PCH_I2CBUFMSK 0x2C /* I2C buffer mode interrupt = mask > > register */ > > +#define PCH_I2CBUFSTA 0x30 /* I2C buffer mode status reg= ister */ > > +#define PCH_I2CBUFLEV 0x34 /* I2C buffer mode level regi= ster */ > > +#define PCH_I2CESRFOR 0x38 /* EEPROM software reset mode > > format register */ > > +#define PCH_I2CESRCTL 0x3C /* EEPROM software reset mode= ctrl > > register */ > > +#define PCH_I2CESRMSK 0x40 /* EEPROM software reset mode= */ > > +#define PCH_I2CESRSTA 0x44 /* EEPROM software reset mode > > status register */ > > +#define PCH_I2CTMR 0x48 /* I2C timer register */ > > +#define PCH_I2CSRST 0xFC /* I2C reset register */ > > +#define PCH_I2CNF 0xF8 /* I2C noise filter register */ > > + > > +#define BUS_IDLE_TIMEOUT 20 > > +#define PCH_I2CCTL_I2CMEN 0x0080 > > +#define TEN_BIT_ADDR_DEFAULT 0xF000 > > +#define TEN_BIT_ADDR_MASK 0xF0 > > +#define PCH_START 0x0020 > > +#define PCH_ESR_START 0x0001 > > +#define PCH_BUFF_START 0x1 > > +#define PCH_REPSTART 0x0004 > > +#define PCH_ACK 0x0008 > > +#define PCH_GETACK 0x0001 > > +#define CLR_REG 0x0 > > +#define I2C_RD 0x1 > > +#define I2CMCF_BIT 0x0080 > > +#define I2CMIF_BIT 0x0002 > > +#define I2CMAL_BIT 0x0010 > > +#define I2CBMFI_BIT 0x0001 > > +#define I2CBMAL_BIT 0x0002 > > +#define I2CBMNA_BIT 0x0004 > > +#define I2CBMTO_BIT 0x0008 > > +#define I2CBMIS_BIT 0x0010 > > +#define I2CESRFI_BIT 0X0001 > > +#define I2CESRTO_BIT 0x0002 > > +#define I2CESRFIIE_BIT 0x1 > > +#define I2CESRTOIE_BIT 0x2 > > +#define I2CBMDZ_BIT 0x0040 > > +#define I2CBMAG_BIT 0x0020 > > +#define I2CMBB_BIT 0x0020 > > +#define BUFFER_MODE_MASK (I2CBMFI_BIT | I2CBMAL_BIT | > > I2CBMNA_BIT | \ > > + I2CBMTO_BIT | I2CBMIS_BIT) > > +#define I2C_ADDR_MSK 0xFF > > +#define I2C_MSB_2B_MSK 0x300 > > +#define FAST_MODE_CLK 400 > > +#define FAST_MODE_EN 0x0001 > > +#define SUB_ADDR_LEN_MAX 4 > > +#define BUF_LEN_MAX 32 > > +#define PCH_BUFFER_MODE 0x1 > > +#define EEPROM_SW_RST_MODE 0x0002 > > +#define NORMAL_INTR_ENBL 0x0300 > > +#define EEPROM_RST_INTR_ENBL (I2CESRFIIE_BIT | I2CESRTOIE_BIT) > > +#define EEPROM_RST_INTR_DISBL 0x0 > > +#define BUFFER_MODE_INTR_ENBL 0x001F > > +#define BUFFER_MODE_INTR_DISBL 0x0 > > +#define NORMAL_MODE 0x0 > > +#define BUFFER_MODE 0x1 > > +#define EEPROM_SR_MODE 0x2 > > +#define I2C_TX_MODE 0x0010 > > +#define PCH_BUF_TX 0xFFF7 > > +#define PCH_BUF_RD 0x0008 > > +#define I2C_ERROR_MASK (I2CESRTO_EVENT | I2CBMIS_EVENT | > > I2CBMTO_EVENT | \ > > + I2CBMNA_EVENT | I2CBMAL_EVENT | I2CMAL_EVENT) > > +#define I2CMAL_EVENT 0x0001 > > +#define I2CMCF_EVENT 0x0002 > > +#define I2CBMFI_EVENT 0x0004 > > +#define I2CBMAL_EVENT 0x0008 > > +#define I2CBMNA_EVENT 0x0010 > > +#define I2CBMTO_EVENT 0x0020 > > +#define I2CBMIS_EVENT 0x0040 > > +#define I2CESRFI_EVENT 0x0080 > > +#define I2CESRTO_EVENT 0x0100 > > +#define PCI_DEVICE_ID_PCH_I2C 0x8817 > > + > > +#define pch_dbg(adap, fmt, arg...) \ > > + dev_dbg(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, #= #arg) > > + > > +#define pch_err(adap, fmt, arg...) \ > > + dev_err(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, #= #arg) > > + > > +#define pch_pci_err(pdev, fmt, arg...) \ > > + dev_err(&pdev->dev, "%s :" fmt, __func__, ##arg) > > + > > +#define pch_pci_dbg(pdev, fmt, arg...) \ > > + dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg) > > + > > +/** > > + * struct i2c_algo_pch_data - for I2C driver functionalities > > + * @pch_adapter: stores the reference to i2c_adapter s= tructure > > + * @p_adapter_info: stores the reference to adapter_info = structure > > + * @pch_base_address: specifies the remapped base a= ddress > > + * @pch_buff_mode_en: specifies if buffer mode is e= nabled > > + * @pch_event_flag: specifies occurrence of interrupt eve= nts > > + * @pch_i2c_xfer_in_progress: specifies whether the transfe= r is completed > > + */ > > +struct i2c_algo_pch_data { > > + struct i2c_adapter pch_adapter; > > + struct adapter_info *p_adapter_info; > > + void __iomem *pch_base_address; > > + int pch_buff_mode_en; > > + u32 pch_event_flag; > > + bool pch_i2c_xfer_in_progress; > > +}; > > + > > +/** > > + * struct adapter_info - This structure holds the adapter informat= ion for the > > + PCH i2c controller > > + * @pch_data: stores a list of i2c_algo_pch_data > > + * @pch_i2c_suspended: specifies whether the system is suspe= nded or not > > + * perhaps with more lines and words. > > + * > > + * pch_data has as many elements as maximum I2C channels > > + */ > > +struct adapter_info { > > + struct i2c_algo_pch_data pch_data; > > + bool pch_i2c_suspended; > > +}; > > + > > + > > +static int pch_i2c_speed =3D 100; /* I2C bus speed in Kbps */ > > +static int pch_clk =3D 50000; /* specifies I2C clock speed in KHz= */ > > +static wait_queue_head_t pch_event; > > +static DEFINE_MUTEX(pch_mutex); > > + > > +static struct pci_device_id __devinitdata pch_pcidev_id[] =3D { > > + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_I2C)}, > > + {0,} > > +}; > > + > > +static irqreturn_t pch_i2c_handler(int irq, void *pData); > > + > > +static inline void pch_setbit(void __iomem *addr, u32 offset, u32 = bitmask) > > +{ > > + u32 val; > > + val =3D ioread32(addr + offset); > > + val |=3D bitmask; > > + iowrite32(val, addr + offset); > > +} > > + > > +static inline void pch_clrbit(void __iomem *addr, u32 offset, u32 = bitmask) > > +{ > > + u32 val; > > + val =3D ioread32(addr + offset); > > + val &=3D (~bitmask); > > + iowrite32(val, addr + offset); > > +} > > + > > +/** > > + * pch_i2c_init() - hardware initialization of I2C module > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static void pch_i2c_init(struct i2c_algo_pch_data *adap) > > +{ > > + void __iomem *p =3D adap->pch_base_address; > > + u32 pch_i2cbc; > > + u32 pch_i2ctmr; > > + u32 reg_value; > > + > > + /* reset I2C controller */ > > + iowrite32(0x01, p + PCH_I2CSRST); > > + msleep(20); > > + iowrite32(0x0, p + PCH_I2CSRST); > > + > > + /* Initialize I2C registers */ > > + iowrite32(0x21, p + PCH_I2CNF); > > + > > + pch_setbit(adap->pch_base_address, PCH_I2CCTL, > > + PCH_I2CCTL_I2CMEN); > > + > > + if (pch_i2c_speed !=3D 400) > > + pch_i2c_speed =3D 100; > > + > > + reg_value =3D PCH_I2CCTL_I2CMEN; > > + if (pch_i2c_speed =3D=3D FAST_MODE_CLK) { > > + reg_value |=3D FAST_MODE_EN; > > + pch_dbg(adap, "Fast mode enabled\n"); > > + } > > + > > + if (pch_clk > PCH_MAX_CLK) > > + pch_clk =3D 62500; > > + > > + pch_i2cbc =3D (pch_clk + (pch_i2c_speed * 4)) / pch_i2c_speed= * 8; > > + /* Set transfer speed in I2CBC */ > > + iowrite32(pch_i2cbc, p + PCH_I2CBC); > > + > > + pch_i2ctmr =3D (pch_clk) / 8; > > + iowrite32(pch_i2ctmr, p + PCH_I2CTMR); > > + > > + reg_value |=3D NORMAL_INTR_ENBL; /* Enable interrupts in nor= mal > > mode */ > > + iowrite32(reg_value, p + PCH_I2CCTL); > > + > > + pch_dbg(adap, > > + "I2CCTL=3D%x pch_i2cbc=3D%x pch_i2ctmr=3D%x Enable in= terrupts\n", > > + ioread32(p + PCH_I2CCTL), pch_i2cbc, pch_i2ctmr); > > + > > + init_waitqueue_head(&pch_event); > > +} > > + > > +static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2= ) > > +{ > > + return cmp1.tv64 < cmp2.tv64; > > +} > > + > > +/** > > + * pch_i2c_wait_for_bus_idle() - check the status of bus. > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + * @timeout: waiting time counter (us). > > + */ > > +static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *ada= p, > > + s32 timeout) > > +{ > > + void __iomem *p =3D adap->pch_base_address; > > + > > + /* MAX timeout value is timeout*1000*1000nsec */ > > + ktime_t ns_val =3D ktime_add_ns(ktime_get(), timeout*1000*100= 0); > > + do { > > + if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) =3D=3D 0) > > + break; > > + msleep(20); > > + } while (ktime_lt(ktime_get(), ns_val)); > > + > > + pch_dbg(adap, "I2CSR =3D %x\n", ioread32(p + PCH_I2CSR)); > > + > > + if (timeout =3D=3D 0) { > > + pch_err(adap, "%s: Timeout Error.return%d\n", __func_= _, -ETIME); > > + return -ETIME; > > + } > > + > > + return 0; > > +} > > + > > +/** > > + * pch_i2c_start() - Generate I2C start condition in normal mode. > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + * > > + * Generate I2C start condition in normal mode by setting I2CCTL.I= 2CMSTA to > > 1. > > + */ > > +static void pch_i2c_start(struct i2c_algo_pch_data *adap) > > +{ > > + void __iomem *p =3D adap->pch_base_address; > > + pch_dbg(adap, "I2CCTL =3D %x\n", ioread32(p + PCH_I2CCTL)); > > + pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_START); > > +} > > + > > +/** > > + * pch_i2c_wait_for_xfer_complete() - initiates a wait for the tx = complete > > event > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data= *adap) > > +{ > > + s32 ret; > > + ret =3D wait_event_timeout(pch_event, > > + (adap->pch_event_flag !=3D 0), msecs_to_jiffi= es(50)); > > + if (ret < 0) { > > + pch_err(adap, "timeout: %x\n", adap->pch_event_flag); > > + return ret; > > + } > > + > > + if (ret =3D=3D 0) { > > + pch_err(adap, "timeout: %x\n", adap->pch_event_flag); > > + return -ETIMEDOUT; > > + } > > + > > + if (adap->pch_event_flag & I2C_ERROR_MASK) { > > + pch_err(adap, "error bits set: %x\n", adap->pch_event= _flag); > > + return -EIO; > > + } > > + > > + adap->pch_event_flag =3D 0; > > + > > + return 0; > > +} > > + > > +/** > > + * pch_i2c_getack() - to confirm ACK/NACK > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static s32 pch_i2c_getack(struct i2c_algo_pch_data *adap) > > +{ > > + u32 reg_val; > > + void __iomem *p =3D adap->pch_base_address; > > + reg_val =3D ioread32(p + PCH_I2CSR) & PCH_GETACK; > > + > > + if (reg_val !=3D 0) { > > + pch_err(adap, "return%d\n", -EPROTO); > > + return -EPROTO; > > + } > > + > > + return 0; > > +} > > + > > +/** > > + * pch_i2c_stop() - generate stop condition in normal mode. > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static void pch_i2c_stop(struct i2c_algo_pch_data *adap) > > +{ > > + void __iomem *p =3D adap->pch_base_address; > > + pch_dbg(adap, "I2CCTL =3D %x\n", ioread32(p + PCH_I2CCTL)); > > + /* clear the start bit */ > > + pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START); > > +} > > + > > +/** > > + * pch_i2c_repstart() - generate repeated start condition in norma= l mode > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static void pch_i2c_repstart(struct i2c_algo_pch_data *adap) > > +{ > > + void __iomem *p =3D adap->pch_base_address; > > + pch_dbg(adap, "I2CCTL =3D %x\n", ioread32(p + PCH_I2CCTL)); > > + pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_REPSTART); > > +} > > + > > +/** > > + * pch_i2c_writebytes() - write data to I2C bus in normal mode > > + * @i2c_adap: Pointer to the struct i2c_adapter. > > + * @last: specifies whether last message or not. > > + * In the case of compound mode it will be 1 for last me= ssage, > > + * otherwise 0. > > + * @first: specifies whether first message or not. > > + * 1 for first message otherwise 0. > > + */ > > +static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap, > > + struct i2c_msg *msgs, u32 last, u32 fir= st) > > +{ > > + struct i2c_algo_pch_data *adap =3D i2c_adap->algo_data; > > + u8 *buf; > > + u32 length; > > + u32 addr; > > + u32 addr_2_msb; > > + u32 addr_8_lsb; > > + s32 wrcount; > > + void __iomem *p =3D adap->pch_base_address; > > + > > + length =3D msgs->len; > > + buf =3D msgs->buf; > > + addr =3D msgs->addr; > > + > > + /* enable master tx */ > > + pch_setbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE); > > + > > + pch_dbg(adap, "I2CCTL =3D %x msgs->len =3D %d\n", ioread32(p = + > > PCH_I2CCTL), > > + length); > > + > > + if (first) { > > + if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT)= =3D=3D -ETIME) > > + return -ETIME; > > + } > > + > > + if (msgs->flags & I2C_M_TEN) { > > + addr_2_msb =3D ((addr & I2C_MSB_2B_MSK) >> 7); > > + iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2C= DR); > > + if (first) > > + pch_i2c_start(adap); > > + if (pch_i2c_wait_for_xfer_complete(adap) =3D=3D 0 && > > + pch_i2c_getack(adap) =3D=3D 0) { > > + addr_8_lsb =3D (addr & I2C_ADDR_MSK); > > + iowrite32(addr_8_lsb, p + PCH_I2CDR); > > + } else { > > + pch_i2c_stop(adap); > > + return -ETIME; > > + } > > + } else { > > + /* set 7 bit slave address and R/W bit as 0 */ > > + iowrite32(addr << 1, p + PCH_I2CDR); > > + if (first) > > + pch_i2c_start(adap); > > + } > > + > > + if ((pch_i2c_wait_for_xfer_complete(adap) =3D=3D 0) && > > + (pch_i2c_getack(adap) =3D=3D 0)) { > > + for (wrcount =3D 0; wrcount < length; ++wrcount) { > > + /* write buffer value to I2C data register */ > > + iowrite32(buf[wrcount], p + PCH_I2CDR); > > + pch_dbg(adap, "writing %x to Data register\n"= , > > + buf[wrcount]); > > + > > + if (pch_i2c_wait_for_xfer_complete(adap) !=3D= 0) > > + return -ETIME; > > + > > + if (pch_i2c_getack(adap)) > > + return -EIO; > > + } > > + > > + /* check if this is the last message */ > > + if (last) > > + pch_i2c_stop(adap); > > + else > > + pch_i2c_repstart(adap); > > + } else { > > + pch_i2c_stop(adap); > > + return -EIO; > > + } > > + > > + pch_dbg(adap, "return=3D%d\n", wrcount); > > + > > + return wrcount; > > +} > > + > > +/** > > + * pch_i2c_sendack() - send ACK > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static void pch_i2c_sendack(struct i2c_algo_pch_data *adap) > > +{ > > + void __iomem *p =3D adap->pch_base_address; > > + pch_dbg(adap, "I2CCTL =3D %x\n", ioread32(p + PCH_I2CCTL)); > > + pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK); > > +} > > + > > +/** > > + * pch_i2c_sendnack() - send NACK > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap) > > +{ > > + void __iomem *p =3D adap->pch_base_address; > > + pch_dbg(adap, "I2CCTL =3D %x\n", ioread32(p + PCH_I2CCTL)); > > + pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK); > > +} > > + > > +/** > > + * pch_i2c_readbytes() - read data from I2C bus in normal mode. > > + * @i2c_adap: Pointer to the struct i2c_adapter. > > + * @msgs: Pointer to i2c_msg structure. > > + * @last: specifies whether last message or not. > > + * @first: specifies whether first message or not. > > + */ > > +s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg= *msgs, > > + u32 last, u32 first) > > +{ > > + struct i2c_algo_pch_data *adap =3D i2c_adap->algo_data; > > + > > + u8 *buf; > > + u32 count; > > + u32 length; > > + u32 addr; > > + u32 addr_2_msb; > > + void __iomem *p =3D adap->pch_base_address; > > + > > + length =3D msgs->len; > > + buf =3D msgs->buf; > > + addr =3D msgs->addr; > > + > > + /* enable master reception */ > > + pch_clrbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE); > > + > > + if (first) { > > + if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT)= =3D=3D -ETIME) > > + return -ETIME; > > + } > > + > > + if (msgs->flags & I2C_M_TEN) { > > + addr_2_msb =3D (((addr & I2C_MSB_2B_MSK) >> 7) | (I2C= _RD)); > > + iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2C= DR); > > + > > + } else { > > + /* 7 address bits + R/W bit */ > > + addr =3D (((addr) << 1) | (I2C_RD)); > > + iowrite32(addr, p + PCH_I2CDR); > > + } > > + > > + /* check if it is the first message */ > > + if (first) > > + pch_i2c_start(adap); > > + > > + if ((pch_i2c_wait_for_xfer_complete(adap) =3D=3D 0) && > > + (pch_i2c_getack(adap) =3D=3D 0)) { > > + pch_dbg(adap, "return %d\n", 0); > > + > > + if (length =3D=3D 0) { > > + pch_i2c_stop(adap); > > + ioread32(p + PCH_I2CDR); /* Dummy read needs = */ > > + > > + count =3D length; > > + } else { > > + int read_index; > > + int loop; > > + pch_i2c_sendack(adap); > > + > > + /* Dummy read */ > > + for (loop =3D 1, read_index =3D 0; loop < len= gth; loop++) { > > + buf[read_index] =3D ioread32(p + PCH_= I2CDR); > > + > > + if (loop !=3D 1) > > + read_index++; > > + > > + if (pch_i2c_wait_for_xfer_complete(ad= ap) !=3D 0) { > > + pch_i2c_stop(adap); > > + return -ETIME; > > + } > > + } /* end for */ > > + > > + pch_i2c_sendnack(adap); > > + > > + buf[read_index] =3D ioread32(p + PCH_I2CDR); > > + > > + if (length !=3D 1) > > + read_index++; > > + > > + if (pch_i2c_wait_for_xfer_complete(adap) =3D=3D= 0) { > > + if (last) > > + pch_i2c_stop(adap); > > + else > > + pch_i2c_repstart(adap); > > + > > + buf[read_index++] =3D ioread32(p + PC= H_I2CDR); > > + count =3D read_index; > > + } else { > > + count =3D -ETIME; > > + } > > + > > + } > > + } else { > > + count =3D -ETIME; > > + pch_i2c_stop(adap); > > + } > > + > > + return count; > > +} > > + > > +/** > > + * pch_i2c_cb_ch0() - Interrupt handler Call back function > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap) > > +{ > > + u32 sts; > > + void __iomem *p =3D adap->pch_base_address; > > + > > + sts =3D ioread32(p + PCH_I2CSR); > > + sts &=3D (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT); > > + if (sts & I2CMAL_BIT) > > + adap->pch_event_flag |=3D I2CMAL_EVENT; > > + > > + if (sts & I2CMCF_BIT) > > + adap->pch_event_flag |=3D I2CMCF_EVENT; > > + > > + /* clear the applicable bits */ > > + pch_clrbit(adap->pch_base_address, PCH_I2CSR, sts); > > + > > + pch_dbg(adap, "PCH_I2CSR =3D %x\n", ioread32(p + PCH_I2CSR)); > > + > > + wake_up(&pch_event); > > +} > > + > > +/** > > + * pch_i2c_handler() - interrupt handler for the PCH I2C controlle= r > > + * @irq: irq number. > > + * @pData: cookie passed back to the handler function. > > + */ > > +static irqreturn_t pch_i2c_handler(int irq, void *pData) > > +{ > > + s32 reg_val; > > + > > + struct i2c_algo_pch_data *adap_data =3D (struct i2c_algo_pch_= data > > *)pData; > > + void __iomem *p =3D adap_data->pch_base_address; > > + u32 mode =3D ioread32(p + PCH_I2CMOD) & (BUFFER_MODE | > > EEPROM_SR_MODE); > > + > > + if (mode !=3D NORMAL_MODE) { > > + pch_err(adap_data, "I2C mode is not supported\n"); > > + return IRQ_NONE; > > + } > > + > > + reg_val =3D ioread32(p + PCH_I2CSR); > > + if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) > > + pch_i2c_cb_ch0(adap_data); > > + else > > + return IRQ_NONE; > > + > > + return IRQ_HANDLED; > > +} > > + > > +/** > > + * pch_i2c_xfer() - Reading adnd writing data through I2C bus > > + * @i2c_adap: Pointer to the struct i2c_adapter. > > + * @msgs: Pointer to i2c_msg structure. > > + * @num: number of messages. > > + */ > > +static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap, > > + struct i2c_msg *msgs, s32 num) > > +{ > > + struct i2c_msg *pmsg; > > + u32 i =3D 0; > > + u32 status; > > + u32 msglen; > > + u32 subaddrlen; > > + s32 ret; > > + > > + struct i2c_algo_pch_data *adap =3D i2c_adap->algo_data; > > + > > + ret =3D mutex_lock_interruptible(&pch_mutex); > > + if (ret) > > + return -ERESTARTSYS; > > + > > + if (adap->p_adapter_info->pch_i2c_suspended) { > > + mutex_unlock(&pch_mutex); > > + return -EBUSY; > > + } > > + > > + pch_dbg(adap, "adap->p_adapter_info->pch_i2c_suspended is %d\= n", > > + adap->p_adapter_info->pch_i2c_suspended); > > + /* transfer not completed */ > > + adap->pch_i2c_xfer_in_progress =3D true; > > + > > + pmsg =3D &msgs[0]; > > + pmsg->flags |=3D adap->pch_buff_mode_en; > > + status =3D pmsg->flags; > > + pch_dbg(adap, > > + "After invoking I2C_MODE_SEL :flag=3D 0x%x\n", status= ); > > + /* calculate sub address length and message length */ > > + /* these are applicable only for buffer mode */ > > + subaddrlen =3D pmsg->buf[0]; > > + /* calculate actual message length excluding > > + * the sub address fields */ > > + msglen =3D (pmsg->len) - (subaddrlen + 1); > > + if (status & (I2C_M_RD)) { > > + pch_dbg(adap, "invoking pch_i2c_readbytes\n"); > > + ret =3D pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 =3D=3D= num), > > + (i =3D=3D 0)); > > + } else { > > + pch_dbg(adap, "invoking pch_i2c_writebytes\n"); > > + ret =3D pch_i2c_writebytes(i2c_adap, pmsg, (i + 1 =3D= =3D num), > > + (i =3D=3D 0)); > > + } > > + > > + adap->pch_i2c_xfer_in_progress =3D false; /* transfer complet= ed */ > > + > > + mutex_unlock(&pch_mutex); > > + > > + return ret; > > +} > > + > > +/** > > + * pch_i2c_func() - return the functionality of the I2C driver > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static u32 pch_i2c_func(struct i2c_adapter *adap) > > +{ > > + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | > > I2C_FUNC_10BIT_ADDR; > > +} > > + > > +static struct i2c_algorithm pch_algorithm =3D { > > + .master_xfer =3D pch_i2c_xfer, > > + .functionality =3D pch_i2c_func > > +}; > > + > > +/** > > + * pch_i2c_disbl_int() - Disable PCH I2C interrupts > > + * @adap: Pointer to struct i2c_algo_pch_data. > > + */ > > +static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap) > > +{ > > + void __iomem *p =3D adap->pch_base_address; > > + > > + pch_clrbit(adap->pch_base_address, PCH_I2CCTL, > > NORMAL_INTR_ENBL); > > + > > + iowrite32(EEPROM_RST_INTR_DISBL, p + PCH_I2CESRMSK); > > + > > + iowrite32(BUFFER_MODE_INTR_DISBL, p + PCH_I2CBUFMSK); > > +} > > + > > +static int __devinit pch_i2c_probe(struct pci_dev *pdev, > > + const struct pci_device_id *id) > > +{ > > + void __iomem *base_addr; > > + s32 ret; > > + struct adapter_info *adap_info; > > + > > + pch_pci_dbg(pdev, "Entered.\n"); > > + > > + adap_info =3D kzalloc((sizeof(struct adapter_info)), GFP_KERN= EL); > > + if (adap_info =3D=3D NULL) { > > + pch_pci_err(pdev, "Memory allocation FAILED\n"); > > + return -ENOMEM; > > + } > > + > > + ret =3D pci_enable_device(pdev); > > + if (ret) { > > + pch_pci_err(pdev, "pci_enable_device FAILED\n"); > > + goto err_pci_enable; > > + } > > + > > + ret =3D pci_request_regions(pdev, KBUILD_MODNAME); > > + if (ret) { > > + pch_pci_err(pdev, "pci_request_regions FAILED\n"); > > + goto err_pci_req; > > + } > > + > > + base_addr =3D pci_iomap(pdev, 1, 0); > > + > > + if (base_addr =3D=3D NULL) { > > + pch_pci_err(pdev, "pci_iomap FAILED\n"); > > + ret =3D -ENOMEM; > > + goto err_pci_iomap; > > + } > > + > > + adap_info->pch_i2c_suspended =3D false; > > + > > + adap_info->pch_data.p_adapter_info =3D adap_info; > > + > > + adap_info->pch_data.pch_adapter.owner =3D THIS_MODULE; > > + adap_info->pch_data.pch_adapter.class =3D I2C_CLASS_HWMON; > > + strcpy(adap_info->pch_data.pch_adapter.name, KBUILD_MODNAME); > > + adap_info->pch_data.pch_adapter.algo =3D &pch_algorithm; > > + adap_info->pch_data.pch_adapter.algo_data =3D > > + &adap_info->pch_data; > > + > > + /* (i * 0x80) + base_addr; */ > > + adap_info->pch_data.pch_base_address =3D base_addr; > > + > > + adap_info->pch_data.pch_adapter.dev.parent =3D &pdev->dev; > > + > > + ret =3D i2c_add_adapter(&(adap_info->pch_data.pch_adapter)); > > + > > + if (ret) { > > + pch_pci_err(pdev, "i2c_add_adapter FAILED\n"); > > + goto err_i2c_add_adapter; > > + } > > + > > + pch_i2c_init(&adap_info->pch_data); > > + ret =3D request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, > > + KBUILD_MODNAME, &adap_info->pch_data); > > + if (ret) { > > + pch_pci_err(pdev, "request_irq FAILED\n"); > > + goto err_request_irq; > > + } > > + > > + pci_set_drvdata(pdev, adap_info); > > + pch_pci_dbg(pdev, "returns %d.\n", ret); > > + return 0; > > + > > +err_request_irq: > > + i2c_del_adapter(&(adap_info->pch_data.pch_adapter)); > > +err_i2c_add_adapter: > > + pci_iounmap(pdev, base_addr); > > +err_pci_iomap: > > + pci_release_regions(pdev); > > +err_pci_req: > > + pci_disable_device(pdev); > > +err_pci_enable: > > + kfree(adap_info); > > + return ret; > > +} > > + > > +static void __devexit pch_i2c_remove(struct pci_dev *pdev) > > +{ > > + struct adapter_info *adap_info =3D pci_get_drvdata(pdev); > > + > > + pch_i2c_disbl_int(&adap_info->pch_data); > > + free_irq(pdev->irq, &adap_info->pch_data); > > + i2c_del_adapter(&(adap_info->pch_data.pch_adapter)); > > + > > + if (adap_info->pch_data.pch_base_address) { > > + pci_iounmap(pdev, adap_info->pch_data.pch_base_addres= s); > > + adap_info->pch_data.pch_base_address =3D 0; > > + } > > + > > + pci_set_drvdata(pdev, NULL); > > + > > + pci_release_regions(pdev); > > + > > + pci_disable_device(pdev); > > + kfree(adap_info); > > +} > > + > > +#ifdef CONFIG_PM > > +static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t stat= e) > > +{ > > + int ret; > > + struct adapter_info *adap_info =3D pci_get_drvdata(pdev); > > + void __iomem *p =3D adap_info->pch_data.pch_base_address; > > + > > + adap_info->pch_i2c_suspended =3D true; > > + > > + while ((adap_info->pch_data.pch_i2c_xfer_in_progress)) { > > + /* Wait until all channel transfers are completed */ > > + msleep(20); > > + } > > + /* Disable the i2c interrupts */ > > + pch_i2c_disbl_int(&adap_info->pch_data); > > + > > + pch_pci_dbg(pdev, "I2CSR =3D %x I2CBUFSTA =3D %x I2CESRSTA =3D= %x " > > + "invoked function pch_i2c_disbl_int successfully\n", > > + ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA), > > + ioread32(p + PCH_I2CESRSTA)); > > + > > + ret =3D pci_save_state(pdev); > > + > > + if (ret) { > > + pch_pci_err(pdev, "pci_save_state\n"); > > + return ret; > > + } > > + > > + pci_enable_wake(pdev, PCI_D3hot, 0); > > + pci_disable_device(pdev); > > + pci_set_power_state(pdev, pci_choose_state(pdev, state)); > > + > > + return 0; > > +} > > + > > +static int pch_i2c_resume(struct pci_dev *pdev) > > +{ > > + struct adapter_info *adap_info =3D pci_get_drvdata(pdev); > > + > > + pci_set_power_state(pdev, PCI_D0); > > + pci_restore_state(pdev); > > + > > + if (pci_enable_device(pdev) < 0) { > > + pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device F= AILED\n"); > > + return -EIO; > > + } > > + > > + pci_enable_wake(pdev, PCI_D3hot, 0); > > + > > + pch_i2c_init(&adap_info->pch_data); > > + > > + adap_info->pch_i2c_suspended =3D false; > > + > > + return 0; > > +} > > +#else > > +#define pch_i2c_suspend NULL > > +#define pch_i2c_resume NULL > > +#endif > > + > > +static struct pci_driver pch_pcidriver =3D { > > + .name =3D KBUILD_MODNAME, > > + .id_table =3D pch_pcidev_id, > > + .probe =3D pch_i2c_probe, > > + .remove =3D __devexit_p(pch_i2c_remove), > > + .suspend =3D pch_i2c_suspend, > > + .resume =3D pch_i2c_resume > > +}; > > + > > +static int __init pch_pci_init(void) > > +{ > > + return pci_register_driver(&pch_pcidriver); > > +} > > +module_init(pch_pci_init); > > + > > +static void __exit pch_pci_exit(void) > > +{ > > + pci_unregister_driver(&pch_pcidriver); > > +} > > +module_exit(pch_pci_exit); > > + > > +MODULE_DESCRIPTION("PCH I2C PCI Driver"); > > +MODULE_LICENSE("GPL"); > > +MODULE_AUTHOR("Tomoya MORINAGA. > > "); > > +module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR)); > > +module_param(pch_clk, int, (S_IRUSR | S_IWUSR)); > > -- > > 1.6.0.6 > [Erreur de d=E9codage BASE64] --=20 Jean Delvare