* [PATCH] i2c: Constify i2c_client where possible
@ 2011-01-05 18:42 Jean Delvare
0 siblings, 0 replies; only message in thread
From: Jean Delvare @ 2011-01-05 18:42 UTC (permalink / raw)
To: Linux I2C; +Cc: Alessandro Zummo
Helper functions for I2C and SMBus transactions don't modify the
i2c_client that is passed to them, so it can be marked const.
Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
---
drivers/i2c/i2c-core.c | 29 ++++++++++++++++-------------
drivers/rtc/rtc-ds1307.c | 12 ++++++------
include/linux/i2c.h | 27 +++++++++++++++------------
3 files changed, 37 insertions(+), 31 deletions(-)
--- linux-2.6.37-rc8.orig/include/linux/i2c.h 2011-01-05 18:31:17.000000000 +0100
+++ linux-2.6.37-rc8/include/linux/i2c.h 2011-01-05 18:31:41.000000000 +0100
@@ -57,9 +57,10 @@ struct i2c_board_info;
* transmit an arbitrary number of messages without interruption.
* @count must be be less than 64k since msg.len is u16.
*/
-extern int i2c_master_send(struct i2c_client *client, const char *buf,
+extern int i2c_master_send(const struct i2c_client *client, const char *buf,
+ int count);
+extern int i2c_master_recv(const struct i2c_client *client, char *buf,
int count);
-extern int i2c_master_recv(struct i2c_client *client, char *buf, int count);
/* Transfer num messages.
*/
@@ -78,23 +79,25 @@ extern s32 i2c_smbus_xfer(struct i2c_ada
/* Now follow the 'nice' access routines. These also document the calling
conventions of i2c_smbus_xfer. */
-extern s32 i2c_smbus_read_byte(struct i2c_client *client);
-extern s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value);
-extern s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command);
-extern s32 i2c_smbus_write_byte_data(struct i2c_client *client,
+extern s32 i2c_smbus_read_byte(const struct i2c_client *client);
+extern s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value);
+extern s32 i2c_smbus_read_byte_data(const struct i2c_client *client,
+ u8 command);
+extern s32 i2c_smbus_write_byte_data(const struct i2c_client *client,
u8 command, u8 value);
-extern s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
-extern s32 i2c_smbus_write_word_data(struct i2c_client *client,
+extern s32 i2c_smbus_read_word_data(const struct i2c_client *client,
+ u8 command);
+extern s32 i2c_smbus_write_word_data(const struct i2c_client *client,
u8 command, u16 value);
/* Returns the number of read bytes */
-extern s32 i2c_smbus_read_block_data(struct i2c_client *client,
+extern s32 i2c_smbus_read_block_data(const struct i2c_client *client,
u8 command, u8 *values);
-extern s32 i2c_smbus_write_block_data(struct i2c_client *client,
+extern s32 i2c_smbus_write_block_data(const struct i2c_client *client,
u8 command, u8 length, const u8 *values);
/* Returns the number of read bytes */
-extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
+extern s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client,
u8 command, u8 length, u8 *values);
-extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
+extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
u8 command, u8 length,
const u8 *values);
#endif /* I2C */
--- linux-2.6.37-rc8.orig/drivers/i2c/i2c-core.c 2011-01-05 18:31:17.000000000 +0100
+++ linux-2.6.37-rc8/drivers/i2c/i2c-core.c 2011-01-05 18:31:41.000000000 +0100
@@ -1362,7 +1362,7 @@ EXPORT_SYMBOL(i2c_transfer);
*
* Returns negative errno, or else the number of bytes written.
*/
-int i2c_master_send(struct i2c_client *client, const char *buf, int count)
+int i2c_master_send(const struct i2c_client *client, const char *buf, int count)
{
int ret;
struct i2c_adapter *adap = client->adapter;
@@ -1389,7 +1389,7 @@ EXPORT_SYMBOL(i2c_master_send);
*
* Returns negative errno, or else the number of bytes read.
*/
-int i2c_master_recv(struct i2c_client *client, char *buf, int count)
+int i2c_master_recv(const struct i2c_client *client, char *buf, int count)
{
struct i2c_adapter *adap = client->adapter;
struct i2c_msg msg;
@@ -1679,7 +1679,7 @@ static int i2c_smbus_check_pec(u8 cpec,
* This executes the SMBus "receive byte" protocol, returning negative errno
* else the byte received from the device.
*/
-s32 i2c_smbus_read_byte(struct i2c_client *client)
+s32 i2c_smbus_read_byte(const struct i2c_client *client)
{
union i2c_smbus_data data;
int status;
@@ -1699,7 +1699,7 @@ EXPORT_SYMBOL(i2c_smbus_read_byte);
* This executes the SMBus "send byte" protocol, returning negative errno
* else zero on success.
*/
-s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
+s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
@@ -1714,7 +1714,7 @@ EXPORT_SYMBOL(i2c_smbus_write_byte);
* This executes the SMBus "read byte" protocol, returning negative errno
* else a data byte received from the device.
*/
-s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
+s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
{
union i2c_smbus_data data;
int status;
@@ -1735,7 +1735,8 @@ EXPORT_SYMBOL(i2c_smbus_read_byte_data);
* This executes the SMBus "write byte" protocol, returning negative errno
* else zero on success.
*/
-s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
+s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
+ u8 value)
{
union i2c_smbus_data data;
data.byte = value;
@@ -1753,7 +1754,7 @@ EXPORT_SYMBOL(i2c_smbus_write_byte_data)
* This executes the SMBus "read word" protocol, returning negative errno
* else a 16-bit unsigned "word" received from the device.
*/
-s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command)
+s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
{
union i2c_smbus_data data;
int status;
@@ -1774,7 +1775,8 @@ EXPORT_SYMBOL(i2c_smbus_read_word_data);
* This executes the SMBus "write word" protocol, returning negative errno
* else zero on success.
*/
-s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
+s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
+ u16 value)
{
union i2c_smbus_data data;
data.word = value;
@@ -1793,7 +1795,8 @@ EXPORT_SYMBOL(i2c_smbus_write_word_data)
* This executes the SMBus "process call" protocol, returning negative errno
* else a 16-bit unsigned "word" received from the device.
*/
-s32 i2c_smbus_process_call(struct i2c_client *client, u8 command, u16 value)
+s32 i2c_smbus_process_call(const struct i2c_client *client, u8 command,
+ u16 value)
{
union i2c_smbus_data data;
int status;
@@ -1821,7 +1824,7 @@ EXPORT_SYMBOL(i2c_smbus_process_call);
* support this; its emulation through I2C messaging relies on a specific
* mechanism (I2C_M_RECV_LEN) which may not be implemented.
*/
-s32 i2c_smbus_read_block_data(struct i2c_client *client, u8 command,
+s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
u8 *values)
{
union i2c_smbus_data data;
@@ -1848,7 +1851,7 @@ EXPORT_SYMBOL(i2c_smbus_read_block_data)
* This executes the SMBus "block write" protocol, returning negative errno
* else zero on success.
*/
-s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
+s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
u8 length, const u8 *values)
{
union i2c_smbus_data data;
@@ -1864,7 +1867,7 @@ s32 i2c_smbus_write_block_data(struct i2
EXPORT_SYMBOL(i2c_smbus_write_block_data);
/* Returns the number of read bytes */
-s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command,
+s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
u8 length, u8 *values)
{
union i2c_smbus_data data;
@@ -1884,7 +1887,7 @@ s32 i2c_smbus_read_i2c_block_data(struct
}
EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
-s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
+s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
u8 length, const u8 *values)
{
union i2c_smbus_data data;
--- linux-2.6.37-rc8.orig/drivers/rtc/rtc-ds1307.c 2011-01-05 18:31:17.000000000 +0100
+++ linux-2.6.37-rc8/drivers/rtc/rtc-ds1307.c 2011-01-05 18:31:41.000000000 +0100
@@ -106,9 +106,9 @@ struct ds1307 {
struct i2c_client *client;
struct rtc_device *rtc;
struct work_struct work;
- s32 (*read_block_data)(struct i2c_client *client, u8 command,
+ s32 (*read_block_data)(const struct i2c_client *client, u8 command,
u8 length, u8 *values);
- s32 (*write_block_data)(struct i2c_client *client, u8 command,
+ s32 (*write_block_data)(const struct i2c_client *client, u8 command,
u8 length, const u8 *values);
};
@@ -158,8 +158,8 @@ MODULE_DEVICE_TABLE(i2c, ds1307_id);
#define BLOCK_DATA_MAX_TRIES 10
-static s32 ds1307_read_block_data_once(struct i2c_client *client, u8 command,
- u8 length, u8 *values)
+static s32 ds1307_read_block_data_once(const struct i2c_client *client,
+ u8 command, u8 length, u8 *values)
{
s32 i, data;
@@ -172,7 +172,7 @@ static s32 ds1307_read_block_data_once(s
return i;
}
-static s32 ds1307_read_block_data(struct i2c_client *client, u8 command,
+static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
u8 length, u8 *values)
{
u8 oldvalues[I2C_SMBUS_BLOCK_MAX];
@@ -198,7 +198,7 @@ static s32 ds1307_read_block_data(struct
return length;
}
-static s32 ds1307_write_block_data(struct i2c_client *client, u8 command,
+static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
u8 length, const u8 *values)
{
u8 currvalues[I2C_SMBUS_BLOCK_MAX];
--
Jean Delvare
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-01-05 18:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-05 18:42 [PATCH] i2c: Constify i2c_client where possible Jean Delvare
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).