* Re: [Bugme-new] [Bug 35572] New: eeprom module: modprobing hangs
[not found] ` <bug-35572-10286-3bo0kxnWaOQUvHkbgXJLS5sdmw4N0Rt+2LY78lusg7I@public.gmane.org/>
@ 2011-06-01 21:42 ` Andrew Morton
[not found] ` <20110601144240.9525825b.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Andrew Morton @ 2011-06-01 21:42 UTC (permalink / raw)
To: markotahal-Re5JQEeQqe8AvxtiuMwx3w
Cc: bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r,
bugme-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Sat, 21 May 2011 20:17:32 GMT
bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r@public.gmane.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=35572
>
> Summary: eeprom module: modprobing hangs
> Product: Other
> Version: 2.5
> Kernel Version: 2.6.39
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Modules
> AssignedTo: other_modules-ztI5WcYan/vQLgFONoPN62D2FQJk+8+b@public.gmane.org
> ReportedBy: markotahal-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
> Regression: No
This is drivers/misc/eeprom/eeprom.c?
That driver doesn't really have a maintainer. Perhaps the i2c
developers can help debug this?
>
> modbrobing eeprom module hangs, but does not crash the kernel. Occurs with
> 2.6.39, with 2.6.38 and prev works ok.
So 2.6.38 did not have this bug?
The driver didn't change between .38 and .39.
> Confirmed by other user, the bug
> reported in Arch can be found here:
> https://bugs.archlinux.org/24376
>
> my HW:
> i686, archlinux kernel (no relevant patch, almost same as mainline :
> ftp://ftp.archlinux.org/other/kernel26/patch-2.6.39-1-ARCH.bz2 ),
>
>
> part from dmesg when modprobing eeprom:
> 57.222509] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
> [ 57.223449] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 67.936739] eth0: no IPv6 routers present
> [ 93.797133] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 94.057661] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 106.272909] EXT4-fs (sda4): re-mounted. Opts: commit=0
> [ 106.957966] EXT4-fs (sda9): re-mounted. Opts: commit=0
> [ 107.181605] EXT4-fs (sda2): re-mounted. Opts: commit=0
> [ 107.331670] EXT4-fs (sda12): re-mounted. Opts: commit=0
> [ 136.933416] [drm] GMBUS timed out, falling back to bit banging on pin 0
> [i915 gmbus disabled]
> [ 136.986739] [drm] GMBUS timed out, falling back to bit banging on pin 0
> [i915 gmbus disabled]
> [ 137.043440] [drm] GMBUS timed out, falling back to bit banging on pin 0
> [i915 gmbus disabled]
> [ 137.096738] [drm] GMBUS timed out, falling back to bit banging on pin 0
> [i915 gmbus disabled]
> [ 137.150067] [drm] GMBUS timed out, falling back to bit banging on pin 0
> [i915 gmbus disabled]
> [ 137.203415] [drm] GMBUS timed out, falling back to bit banging on pin 0
> [i915 gmbus disabled]
> [ 137.256761] [drm] GMBUS timed out, falling back to bit banging on pin 0
> [i915 gmbus disabled]
> [ 137.310101] [drm] GMBUS timed out, falling back to bit banging on pin 0
> [i915 gmbus disabled]
> [ 137.523400] [drm] GMBUS timed out, falling back to bit banging on pin 4
> [i915 gmbus dpc]
> [ 178.299024] kwin_opengl_tes[3439]: segfault at 2c ip b70a5c48 sp bfb90520
> error 4 in i915_dri.so[b706c000+35b000]
> [ 213.183783] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>
>
>
>
> lspci -vvv
> 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller
> Hub (rev 03)
> Subsystem: Lenovo Device 386f
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information: Len=09 <?>
> Kernel driver in use: agpgart-intel
> Kernel modules: intel-agp
>
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express
> Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
> Subsystem: Lenovo Device 3870
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=512K]
> Region 1: I/O ports at 1800 [size=8]
> Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Region 3: Memory at f0400000 (32-bit, non-prefetchable) [size=256K]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: i915
> Kernel modules: i915
>
> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML
> Express Integrated Graphics Controller (rev 03)
> Subsystem: Lenovo Device 3870
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at f0380000 (32-bit, non-prefetchable) [size=512K]
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>
> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio
> Controller (rev 02)
> Subsystem: Lenovo Device 3bf8
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 43
> Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000fee0300c Data: 4179
> Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI
> 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency
> L0 <64ns, L1 <1us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
> Status: NegoPending- InProgress-
> Capabilities: [130 v1] Root Complex Link
> Desc: PortNumber=0f ComponentID=02 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
> LinkType=MemMapped LinkValid+
> Addr: 00000000fed1c000
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev
> 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: f0100000-f01fffff
> Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <256ns, L1 <4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
> Surprise+
> Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power-
> Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Address: fee0300c Data: 4151
> Capabilities: [90] Subsystem: Intel Corporation Device 1999
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed+ WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
> Status: NegoPending- InProgress-
> Capabilities: [180 v1] Root Complex Link
> Desc: PortNumber=01 ComponentID=02 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
> LinkType=MemMapped LinkValid+
> Addr: 00000000fed1c001
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev
> 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: 80200000-803fffff
> Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <1us, L1 <4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
> Surprise+
> Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power-
> Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Address: fee0300c Data: 4159
> Capabilities: [90] Subsystem: Intel Corporation Device 1999
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed+ WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
> Status: NegoPending- InProgress-
> Capabilities: [180 v1] Root Complex Link
> Desc: PortNumber=02 ComponentID=02 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
> LinkType=MemMapped LinkValid+
> Addr: 00000000fed1c001
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev
> 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: f0200000-f02fffff
> Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
> ExtTag- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <256ns, L1 <4us
> ClockPM- Surprise- LLActRep+ BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
> Surprise+
> Slot #4, PowerLimit 6.500W; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power-
> Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Address: fee0300c Data: 4161
> Capabilities: [90] Subsystem: Intel Corporation Device 1999
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed+ WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
> Status: NegoPending- InProgress-
> Capabilities: [180 v1] Root Complex Link
> Desc: PortNumber=03 ComponentID=02 EltType=Config
> Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB-
> LinkType=MemMapped LinkValid+
> Addr: 00000000fed1c001
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
> #1 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 3807
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 23
> Region 4: I/O ports at 1820 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
> #2 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 3808
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at 1840 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
> #3 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 3809
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at 1860 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller
> #4 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Lenovo Device 380a
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 16
> Region 4: I/O ports at 1880 [size=32]
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller
> (rev 02) (prog-if 20 [EHCI])
> Subsystem: Lenovo Device 380b
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at f0644000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if
> 01 [Subtractive decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Subsystem: Lenovo Device 380c
>
> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
> (rev 02)
> Subsystem: Lenovo Device 380d
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information: Len=0c <?>
> Kernel modules: intel-rng, leds-ss4200, iTCO_wdt
>
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
> (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: Lenovo Device 3810
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx+
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at 1810 [size=16]
> Kernel driver in use: ata_piix
> Kernel modules: piix, ata_piix
>
> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE
> Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Lenovo Device 3835
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 0: I/O ports at 18c8 [size=8]
> Region 1: I/O ports at 18c0 [size=4]
> Region 2: I/O ports at 18a8 [size=8]
> Region 3: I/O ports at 180c [size=4]
> Region 4: I/O ports at 18b0 [size=16]
> Region 5: Memory at f0644400 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [70] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ata_piix
> Kernel modules: ata_piix
>
> 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
> Subsystem: Lenovo Device 380f
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at 18e0 [size=32]
> Kernel driver in use: i801_smbus
> Kernel modules: i2c-i801
>
> 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast
> Ethernet PCI Express (rev 02)
> Subsystem: Lenovo IdeaPad S10e
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 44
> Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=64K]
> Expansion ROM at <ignored> [disabled]
> Capabilities: [48] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] Vital Product Data
> End
> Capabilities: [58] Vendor Specific Information: Len=78 <?>
> Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000fee0300c Data: 4199
> Capabilities: [d0] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
> unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 4096 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <4us, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [13c v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> Capabilities: [160 v1] Device Serial Number 00-23-8b-ff-fe-40-d5-e4
> Kernel driver in use: tg3
> Kernel modules: tg3
>
> 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev
> 01)
> Subsystem: Broadcom Corporation Device 04b5
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [58] Vendor Specific Information: Len=78 <?>
> Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [d0] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
> unlimited
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <4us, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [13c v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> Status: NegoPending- InProgress-
> Capabilities: [160 v1] Device Serial Number 2e-19-00-ff-ff-91-00-21
> Capabilities: [16c v1] Power Budgeting <?>
> Kernel driver in use: b43-pci-bridge
> Kernel modules: ssb
>
>
>
> Thank you and please let me know if i can provide more info to debug.
> Regards, Mark
One thing you could try is to modprobe the driver and then from another
terminal, do a `ps aux' and see if the modprobe is in "R", "D" or "S"
state. Then do an
echo t > /proc/sysrq-trigger
(or "echo w" if it was in D state) and then run "dmesg -s 1000000 >
foo", then send us the backtrace for that stuck modprobe instance.
Please ensure that your email client doesn't wordwrap the trace!
Thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bugme-new] [Bug 35572] New: eeprom module: modprobing hangs
[not found] ` <20110601144240.9525825b.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
@ 2011-06-01 21:45 ` Andrew Morton
[not found] ` <20110601144552.32dc519e.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2011-06-02 15:53 ` [Bugme-new] [Bug 35572] New: " Marek Otahal
1 sibling, 1 reply; 6+ messages in thread
From: Andrew Morton @ 2011-06-01 21:45 UTC (permalink / raw)
To: markotahal-Re5JQEeQqe8AvxtiuMwx3w,
bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r,
bugme-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA
On Wed, 1 Jun 2011 14:42:40 -0700
Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote:
> (switched to email. Please respond via emailed reply-to-all, not via the
> bugzilla web interface).
>
> On Sat, 21 May 2011 20:17:32 GMT
> bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r@public.gmane.org wrote:
>
> > https://bugzilla.kernel.org/show_bug.cgi?id=35572
whoa, that's creepy. The report is ten days old, but in the two-minute
window between me reading it and then sending this email, Jean
responded in bugzilla.
Still, the backtrace might be useful.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bug 35572] eeprom module: modprobing hangs
[not found] ` <20110601144552.32dc519e.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
@ 2011-06-02 8:40 ` Jean Delvare
0 siblings, 0 replies; 6+ messages in thread
From: Jean Delvare @ 2011-06-02 8:40 UTC (permalink / raw)
To: Andrew Morton
Cc: markotahal-Re5JQEeQqe8AvxtiuMwx3w,
linux-i2c-u79uwXL29TY76Z2rM5mHXA
Hi Andrew,
On Wed, 1 Jun 2011 14:45:52 -0700, Andrew Morton wrote:
> On Wed, 1 Jun 2011 14:42:40 -0700
> Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org> wrote:
>
> > (switched to email. Please respond via emailed reply-to-all, not via the
> > bugzilla web interface).
> >
> > On Sat, 21 May 2011 20:17:32 GMT
> > bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r@public.gmane.org wrote:
> >
> > > https://bugzilla.kernel.org/show_bug.cgi?id=35572
>
> whoa, that's creepy. The report is ten days old, but in the two-minute
> window between me reading it and then sending this email, Jean
> responded in bugzilla.
I have been having an SMTP issue causing e-mail from kernel.org
(amongst others) to not get delivered to me for some time. I just
figured it out yesterday, and got flooded almost immediately with all
the stray notifications. This is why.
> Still, the backtrace might be useful.
Definitely. Your advice was probably better than mine. Shame on me, I
really should know better tricks by now :(
--
Jean Delvare
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bug 35572] eeprom module: modprobing hangs
[not found] ` <201106021753.50961.markotahal-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2011-06-02 14:17 ` Jean Delvare
[not found] ` <20110602161742.1b22051a-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Jean Delvare @ 2011-06-02 14:17 UTC (permalink / raw)
To: Marek Otahal
Cc: Andrew Morton, bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Keith Packard, Chris Wilson
On Thu, 2 Jun 2011 17:53:42 +0200, Marek Otahal wrote:
> I'm attaching the whole backtrace and adding the interesting part here too:
> Thank you, Mark
>
> PS: Is there a way to kill the modprobe process? ctrl+c nor kill -9 work for me, so i have to reboot every time.
I don't think there is another way, sorry.
> -----------------------------------------------
> [ 462.667305] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
> [ 770.753437] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
> [ 770.806696] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
> [ 770.860064] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
> [ 770.913400] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
> [ 770.966721] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
> [ 771.020018] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
> [ 771.073382] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
> [ 771.126696] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
> [ 771.340045] [drm] GMBUS timed out, falling back to bit banging on pin 4 [i915 gmbus dpc]
> [ 961.296817] INFO: task modprobe:4538 blocked for more than 120 seconds.
> [ 961.296831] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 961.296843] modprobe D e1001bec 0 4538 4495 0x00000000
> [ 961.296865] e1001bfc 00000086 00000002 e1001bec 00000001 e1001c63 e1001b72 e1001b76
> [ 961.296894] 00000000 33343030 ab3291d1 00000001 f14c2c00 e1001c30 00000001 c14e1440
> [ 961.296921] f657ca00 c14e1440 f657c440 f4e6c000 f5862f70 e1001bc8 c11ad279 e1001bfc
> [ 961.296949] Call Trace:
> [ 961.296977] [<c11ad279>] ? format_decode+0x319/0x380
> [ 961.296993] [<c11af1aa>] ? vsnprintf+0x2ea/0x3d0
> [ 961.297060] [<c132f1ed>] __mutex_lock_slowpath+0x10d/0x2b0
> [ 961.297133] [<c132f39b>] mutex_lock+0xb/0x20
> [ 961.297188] [<f805820d>] i2c_add_adapter+0x2d/0xa0 [i2c_core]
> [ 961.297239] [<f806b90d>] __i2c_bit_add_bus+0x17d/0x2f0 [i2c_algo_bit]
> [ 961.297291] [<f80581e0>] ? i2c_add_numbered_adapter+0xd0/0xd0 [i2c_core]
> [ 961.297342] [<f806ba9d>] i2c_bit_add_bus+0xd/0x10 [i2c_algo_bit]
> [ 961.297415] [<f82cd52b>] intel_gpio_create+0x11b/0x170 [i915]
> [ 961.297517] [<f82ce4aa>] gmbus_xfer+0xbca/0xdf0 [i915]
> [ 961.297599] [<f80583c5>] i2c_transfer+0x85/0xb0 [i2c_core]
> [ 961.297653] [<f80586c4>] i2c_smbus_xfer+0x234/0x540 [i2c_core]
> [ 961.297671] [<c11a0001>] ? blk_throtl_work+0x291/0x4d0
> [ 961.297687] [<c131515b>] ? klist_add_tail+0x3b/0x50
> [ 961.297703] [<c124c0df>] ? put_device+0xf/0x20
> [ 961.297718] [<c124d123>] ? device_add+0x73/0x5f0
> [ 961.297788] [<f8058f99>] i2c_default_probe+0xe9/0x130 [i2c_core]
> [ 961.297830] [<c124c335>] ? device_for_each_child+0x45/0x50
> [ 961.297907] [<f8059153>] i2c_do_add_adapter+0x173/0x260 [i2c_core]
> [ 961.297933] [<c11a8fd8>] ? kobject_uevent_env+0xf8/0x430
> [ 961.297955] [<c11a8e90>] ? add_uevent_var+0xc0/0xc0
> [ 961.298034] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
> [ 961.298110] [<f8059652>] __process_new_driver+0x22/0x2b [i2c_core]
> [ 961.298136] [<c124e8e1>] bus_for_each_dev+0x41/0x70
> [ 961.298210] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
> [ 961.298286] [<f80577ab>] i2c_for_each_dev+0x2b/0x50 [i2c_core]
> [ 961.298365] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
> [ 961.298441] [<f80593bf>] i2c_register_driver+0x4f/0xa0 [i2c_core]
> [ 961.298470] [<c1066c65>] ? notifier_call_chain.isra.0+0x45/0x60
> [ 961.298500] [<f8710012>] eeprom_init+0x12/0x14 [eeprom]
> [ 961.298524] [<c1001120>] do_one_initcall+0x30/0x170
> [ 961.298572] [<f8710000>] ? 0xf870ffff
> [ 961.298599] [<c107b453>] sys_init_module+0xe03/0x1a20
> [ 961.298738] [<c1330edf>] sysenter_do_call+0x12/0x28
OK, I see what's going on. This is a deadlock on i2c-core's main mutex
(drivers/i2c/i2c-core.c:core_lock). It is taken a first time by the
eeprom driver, to walk all the i2c adapters in search for supported
devices. Then it is taken a second time by the i915 driver, when it
attempts to register a new i2c adapter in the middle of the operation.
This only happens with the eeprom driver because legacy device
detection is only enabled on i915 for class I2C_CLASS_DDC, which in
turn is only set by the eeprom driver.
This only happens with the i915 driver, because it attempts to create a
new i2c adapter in the middle of a transaction. This is very uncommon,
the i2c core was never designed for this.
I suspect that the regression is caused by
8f9a3f9b63b8cd3f03be9dc53533f90bd4120e5f. Before this commit, the
software bit-banged interface was created earlier. So I would suggest
that we revert this commit from 2.6.39 and upstream for the time being.
For the long term, I think that the i2c implementation of i915 should
be reworked. Having two i2c adapters per actual bus, one for hardware
controlled and one for software controlled, is confusing and dangerous.
And creating a bus on the fly in the middle of a transaction is just as
bad. If you really can't instantiate only the one you need, then you
should instantiate the software controlled one (i2c_bit_add_adapter),
then update the algorithm to switch to hardware controlled where
possible, and ultimately undo that update if the hardware controller
turns out to be non-working. I can't write the code as I don't have any
supported piece of hardware and I'm not familiar with the code, but I
can help review any patch if you want.
--
Jean Delvare
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bugme-new] [Bug 35572] New: eeprom module: modprobing hangs
[not found] ` <20110601144240.9525825b.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2011-06-01 21:45 ` Andrew Morton
@ 2011-06-02 15:53 ` Marek Otahal
[not found] ` <201106021753.50961.markotahal-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
1 sibling, 1 reply; 6+ messages in thread
From: Marek Otahal @ 2011-06-02 15:53 UTC (permalink / raw)
To: Andrew Morton
Cc: bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r,
bugme-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: Type: Text/Plain, Size: 26458 bytes --]
Hello,
thank you for advice to debug, the things I tried follow..
On Wednesday 01 of June 2011 23:42:40 Andrew Morton wrote:
> (switched to email. Please respond via emailed reply-to-all, not via the
> bugzilla web interface).
>
> On Sat, 21 May 2011 20:17:32 GMT
>
> bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r@public.gmane.org wrote:
> > https://bugzilla.kernel.org/show_bug.cgi?id=35572
> >
> > Summary: eeprom module: modprobing hangs
> > Product: Other
> > Version: 2.5
> >
> > Kernel Version: 2.6.39
> >
> > Platform: All
> >
> > OS/Version: Linux
> >
> > Tree: Mainline
> >
> > Status: NEW
> >
> > Severity: normal
> > Priority: P1
> >
> > Component: Modules
> >
> > AssignedTo: other_modules-ztI5WcYan/vQLgFONoPN62D2FQJk+8+b@public.gmane.org
> > ReportedBy: markotahal-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
> > Regression: No
>
> This is drivers/misc/eeprom/eeprom.c?
>
> That driver doesn't really have a maintainer. Perhaps the i2c
> developers can help debug this?
>
> > modbrobing eeprom module hangs, but does not crash the kernel. Occurs
> > with 2.6.39, with 2.6.38 and prev works ok.
>
> So 2.6.38 did not have this bug?
>
> The driver didn't change between .38 and .39.
Yes, it works ok on 2.6.38 kernel. Someone above suggested it might be related to i915 driver(?)
>
> > Confirmed by other user, the bug
> > reported in Arch can be found here:
> > https://bugs.archlinux.org/24376
> > ....
> > Thank you and please let me know if i can provide more info to debug.
> > Regards, Mark
>
> One thing you could try is to modprobe the driver and then from another
> terminal, do a `ps aux' and see if the modprobe is in "R", "D" or "S"
> state. Then do an
modprobe is in D+ state.
>
> echo t > /proc/sysrq-trigger
>
> (or "echo w" if it was in D state) and then run "dmesg -s 1000000 >
> foo", then send us the backtrace for that stuck modprobe instance.
> Please ensure that your email client doesn't wordwrap the trace!
I'm attaching the whole backtrace and adding the interesting part here too:
Thank you, Mark
PS: Is there a way to kill the modprobe process? ctrl+c nor kill -9 work for me, so i have to reboot every time.
-----------------------------------------------
[ 462.667305] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 770.753437] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
[ 770.806696] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
[ 770.860064] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
[ 770.913400] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
[ 770.966721] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
[ 771.020018] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
[ 771.073382] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
[ 771.126696] [drm] GMBUS timed out, falling back to bit banging on pin 0 [i915 gmbus disabled]
[ 771.340045] [drm] GMBUS timed out, falling back to bit banging on pin 4 [i915 gmbus dpc]
[ 961.296817] INFO: task modprobe:4538 blocked for more than 120 seconds.
[ 961.296831] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 961.296843] modprobe D e1001bec 0 4538 4495 0x00000000
[ 961.296865] e1001bfc 00000086 00000002 e1001bec 00000001 e1001c63 e1001b72 e1001b76
[ 961.296894] 00000000 33343030 ab3291d1 00000001 f14c2c00 e1001c30 00000001 c14e1440
[ 961.296921] f657ca00 c14e1440 f657c440 f4e6c000 f5862f70 e1001bc8 c11ad279 e1001bfc
[ 961.296949] Call Trace:
[ 961.296977] [<c11ad279>] ? format_decode+0x319/0x380
[ 961.296993] [<c11af1aa>] ? vsnprintf+0x2ea/0x3d0
[ 961.297060] [<c132f1ed>] __mutex_lock_slowpath+0x10d/0x2b0
[ 961.297133] [<c132f39b>] mutex_lock+0xb/0x20
[ 961.297188] [<f805820d>] i2c_add_adapter+0x2d/0xa0 [i2c_core]
[ 961.297239] [<f806b90d>] __i2c_bit_add_bus+0x17d/0x2f0 [i2c_algo_bit]
[ 961.297291] [<f80581e0>] ? i2c_add_numbered_adapter+0xd0/0xd0 [i2c_core]
[ 961.297342] [<f806ba9d>] i2c_bit_add_bus+0xd/0x10 [i2c_algo_bit]
[ 961.297415] [<f82cd52b>] intel_gpio_create+0x11b/0x170 [i915]
[ 961.297517] [<f82ce4aa>] gmbus_xfer+0xbca/0xdf0 [i915]
[ 961.297599] [<f80583c5>] i2c_transfer+0x85/0xb0 [i2c_core]
[ 961.297653] [<f80586c4>] i2c_smbus_xfer+0x234/0x540 [i2c_core]
[ 961.297671] [<c11a0001>] ? blk_throtl_work+0x291/0x4d0
[ 961.297687] [<c131515b>] ? klist_add_tail+0x3b/0x50
[ 961.297703] [<c124c0df>] ? put_device+0xf/0x20
[ 961.297718] [<c124d123>] ? device_add+0x73/0x5f0
[ 961.297788] [<f8058f99>] i2c_default_probe+0xe9/0x130 [i2c_core]
[ 961.297830] [<c124c335>] ? device_for_each_child+0x45/0x50
[ 961.297907] [<f8059153>] i2c_do_add_adapter+0x173/0x260 [i2c_core]
[ 961.297933] [<c11a8fd8>] ? kobject_uevent_env+0xf8/0x430
[ 961.297955] [<c11a8e90>] ? add_uevent_var+0xc0/0xc0
[ 961.298034] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 961.298110] [<f8059652>] __process_new_driver+0x22/0x2b [i2c_core]
[ 961.298136] [<c124e8e1>] bus_for_each_dev+0x41/0x70
[ 961.298210] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 961.298286] [<f80577ab>] i2c_for_each_dev+0x2b/0x50 [i2c_core]
[ 961.298365] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 961.298441] [<f80593bf>] i2c_register_driver+0x4f/0xa0 [i2c_core]
[ 961.298470] [<c1066c65>] ? notifier_call_chain.isra.0+0x45/0x60
[ 961.298500] [<f8710012>] eeprom_init+0x12/0x14 [eeprom]
[ 961.298524] [<c1001120>] do_one_initcall+0x30/0x170
[ 961.298572] [<f8710000>] ? 0xf870ffff
[ 961.298599] [<c107b453>] sys_init_module+0xe03/0x1a20
[ 961.298738] [<c1330edf>] sysenter_do_call+0x12/0x28
[ 1081.296837] INFO: task modprobe:4538 blocked for more than 120 seconds.
[ 1081.296855] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1081.296871] modprobe D e1001bec 0 4538 4495 0x00000000
[ 1081.296898] e1001bfc 00000086 00000002 e1001bec 00000001 e1001c63 e1001b72 e1001b76
[ 1081.296938] 00000000 33343030 ab3291d1 00000001 f14c2c00 e1001c30 00000001 c14e1440
[ 1081.296980] f657ca00 c14e1440 f657c440 f4e6c000 f5862f70 e1001bc8 c11ad279 e1001bfc
[ 1081.297019] Call Trace:
[ 1081.297055] [<c11ad279>] ? format_decode+0x319/0x380
[ 1081.297079] [<c11af1aa>] ? vsnprintf+0x2ea/0x3d0
[ 1081.297165] [<c132f1ed>] __mutex_lock_slowpath+0x10d/0x2b0
[ 1081.297283] [<c132f39b>] mutex_lock+0xb/0x20
[ 1081.297362] [<f805820d>] i2c_add_adapter+0x2d/0xa0 [i2c_core]
[ 1081.297437] [<f806b90d>] __i2c_bit_add_bus+0x17d/0x2f0 [i2c_algo_bit]
[ 1081.297515] [<f80581e0>] ? i2c_add_numbered_adapter+0xd0/0xd0 [i2c_core]
[ 1081.297584] [<f806ba9d>] i2c_bit_add_bus+0xd/0x10 [i2c_algo_bit]
[ 1081.297665] [<f82cd52b>] intel_gpio_create+0x11b/0x170 [i915]
[ 1081.297767] [<f82ce4aa>] gmbus_xfer+0xbca/0xdf0 [i915]
[ 1081.297867] [<f80583c5>] i2c_transfer+0x85/0xb0 [i2c_core]
[ 1081.298032] [<f80586c4>] i2c_smbus_xfer+0x234/0x540 [i2c_core]
[ 1081.298052] [<c11a0001>] ? blk_throtl_work+0x291/0x4d0
[ 1081.298068] [<c131515b>] ? klist_add_tail+0x3b/0x50
[ 1081.298084] [<c124c0df>] ? put_device+0xf/0x20
[ 1081.298099] [<c124d123>] ? device_add+0x73/0x5f0
[ 1081.298168] [<f8058f99>] i2c_default_probe+0xe9/0x130 [i2c_core]
[ 1081.298185] [<c124c335>] ? device_for_each_child+0x45/0x50
[ 1081.298239] [<f8059153>] i2c_do_add_adapter+0x173/0x260 [i2c_core]
[ 1081.298258] [<c11a8fd8>] ? kobject_uevent_env+0xf8/0x430
[ 1081.298273] [<c11a8e90>] ? add_uevent_var+0xc0/0xc0
[ 1081.298329] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1081.298381] [<f8059652>] __process_new_driver+0x22/0x2b [i2c_core]
[ 1081.298399] [<c124e8e1>] bus_for_each_dev+0x41/0x70
[ 1081.298452] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1081.298505] [<f80577ab>] i2c_for_each_dev+0x2b/0x50 [i2c_core]
[ 1081.298557] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1081.298610] [<f80593bf>] i2c_register_driver+0x4f/0xa0 [i2c_core]
[ 1081.298629] [<c1066c65>] ? notifier_call_chain.isra.0+0x45/0x60
[ 1081.298647] [<f8710012>] eeprom_init+0x12/0x14 [eeprom]
[ 1081.298663] [<c1001120>] do_one_initcall+0x30/0x170
[ 1081.298697] [<f8710000>] ? 0xf870ffff
[ 1081.298714] [<c107b453>] sys_init_module+0xe03/0x1a20
[ 1081.298825] [<c1330edf>] sysenter_do_call+0x12/0x28
[ 1201.296846] INFO: task modprobe:4538 blocked for more than 120 seconds.
[ 1201.296859] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1201.296872] modprobe D e1001bec 0 4538 4495 0x00000000
[ 1201.296893] e1001bfc 00000086 00000002 e1001bec 00000001 e1001c63 e1001b72 e1001b76
[ 1201.296922] 00000000 33343030 ab3291d1 00000001 f14c2c00 e1001c30 00000001 c14e1440
[ 1201.296949] f657ca00 c14e1440 f657c440 f4e6c000 f5862f70 e1001bc8 c11ad279 e1001bfc
[ 1201.296977] Call Trace:
[ 1201.297005] [<c11ad279>] ? format_decode+0x319/0x380
[ 1201.297021] [<c11af1aa>] ? vsnprintf+0x2ea/0x3d0
[ 1201.297090] [<c132f1ed>] __mutex_lock_slowpath+0x10d/0x2b0
[ 1201.297164] [<c132f39b>] mutex_lock+0xb/0x20
[ 1201.297231] [<f805820d>] i2c_add_adapter+0x2d/0xa0 [i2c_core]
[ 1201.297370] [<f806b90d>] __i2c_bit_add_bus+0x17d/0x2f0 [i2c_algo_bit]
[ 1201.297426] [<f80581e0>] ? i2c_add_numbered_adapter+0xd0/0xd0 [i2c_core]
[ 1201.297477] [<f806ba9d>] i2c_bit_add_bus+0xd/0x10 [i2c_algo_bit]
[ 1201.297550] [<f82cd52b>] intel_gpio_create+0x11b/0x170 [i915]
[ 1201.297653] [<f82ce4aa>] gmbus_xfer+0xbca/0xdf0 [i915]
[ 1201.297737] [<f80583c5>] i2c_transfer+0x85/0xb0 [i2c_core]
[ 1201.297791] [<f80586c4>] i2c_smbus_xfer+0x234/0x540 [i2c_core]
[ 1201.297809] [<c11a0001>] ? blk_throtl_work+0x291/0x4d0
[ 1201.297826] [<c131515b>] ? klist_add_tail+0x3b/0x50
[ 1201.297841] [<c124c0df>] ? put_device+0xf/0x20
[ 1201.297856] [<c124d123>] ? device_add+0x73/0x5f0
[ 1201.297927] [<f8058f99>] i2c_default_probe+0xe9/0x130 [i2c_core]
[ 1201.297944] [<c124c335>] ? device_for_each_child+0x45/0x50
[ 1201.297998] [<f8059153>] i2c_do_add_adapter+0x173/0x260 [i2c_core]
[ 1201.298016] [<c11a8fd8>] ? kobject_uevent_env+0xf8/0x430
[ 1201.298031] [<c11a8e90>] ? add_uevent_var+0xc0/0xc0
[ 1201.298089] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1201.298144] [<f8059652>] __process_new_driver+0x22/0x2b [i2c_core]
[ 1201.298161] [<c124e8e1>] bus_for_each_dev+0x41/0x70
[ 1201.298215] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1201.298268] [<f80577ab>] i2c_for_each_dev+0x2b/0x50 [i2c_core]
[ 1201.298332] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1201.298408] [<f80593bf>] i2c_register_driver+0x4f/0xa0 [i2c_core]
[ 1201.298436] [<c1066c65>] ? notifier_call_chain.isra.0+0x45/0x60
[ 1201.298464] [<f8710012>] eeprom_init+0x12/0x14 [eeprom]
[ 1201.298487] [<c1001120>] do_one_initcall+0x30/0x170
[ 1201.298534] [<f8710000>] ? 0xf870ffff
[ 1201.298560] [<c107b453>] sys_init_module+0xe03/0x1a20
[ 1201.298727] [<c1330edf>] sysenter_do_call+0x12/0x28
[ 1206.700674] SysRq : Show Blocked State
[ 1206.700688] task PC stack pid father
[ 1206.700880] modprobe D e1001bec 0 4538 4495 0x00000000
[ 1206.700897] e1001bfc 00000086 00000002 e1001bec 00000001 e1001c63 e1001b72 e1001b76
[ 1206.700916] 00000000 33343030 ab3291d1 00000001 f14c2c00 e1001c30 00000001 c14e1440
[ 1206.700934] f657ca00 c14e1440 f657c440 f4e6c000 f5862f70 e1001bc8 c11ad279 e1001bfc
[ 1206.700954] Call Trace:
[ 1206.700974] [<c11ad279>] ? format_decode+0x319/0x380
[ 1206.700986] [<c11af1aa>] ? vsnprintf+0x2ea/0x3d0
[ 1206.701046] [<c132f1ed>] __mutex_lock_slowpath+0x10d/0x2b0
[ 1206.701127] [<c132f39b>] mutex_lock+0xb/0x20
[ 1206.701178] [<f805820d>] i2c_add_adapter+0x2d/0xa0 [i2c_core]
[ 1206.701227] [<f806b90d>] __i2c_bit_add_bus+0x17d/0x2f0 [i2c_algo_bit]
[ 1206.701277] [<f80581e0>] ? i2c_add_numbered_adapter+0xd0/0xd0 [i2c_core]
[ 1206.701325] [<f806ba9d>] i2c_bit_add_bus+0xd/0x10 [i2c_algo_bit]
[ 1206.701388] [<f82cd52b>] intel_gpio_create+0x11b/0x170 [i915]
[ 1206.701485] [<f82ce4aa>] gmbus_xfer+0xbca/0xdf0 [i915]
[ 1206.701570] [<f80583c5>] i2c_transfer+0x85/0xb0 [i2c_core]
[ 1206.701620] [<f80586c4>] i2c_smbus_xfer+0x234/0x540 [i2c_core]
[ 1206.701636] [<c11a0001>] ? blk_throtl_work+0x291/0x4d0
[ 1206.701649] [<c131515b>] ? klist_add_tail+0x3b/0x50
[ 1206.701660] [<c124c0df>] ? put_device+0xf/0x20
[ 1206.701671] [<c124d123>] ? device_add+0x73/0x5f0
[ 1206.701737] [<f8058f99>] i2c_default_probe+0xe9/0x130 [i2c_core]
[ 1206.701751] [<c124c335>] ? device_for_each_child+0x45/0x50
[ 1206.701799] [<f8059153>] i2c_do_add_adapter+0x173/0x260 [i2c_core]
[ 1206.701814] [<c11a8fd8>] ? kobject_uevent_env+0xf8/0x430
[ 1206.701826] [<c11a8e90>] ? add_uevent_var+0xc0/0xc0
[ 1206.701876] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1206.701924] [<f8059652>] __process_new_driver+0x22/0x2b [i2c_core]
[ 1206.701939] [<c124e8e1>] bus_for_each_dev+0x41/0x70
[ 1206.701986] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1206.702035] [<f80577ab>] i2c_for_each_dev+0x2b/0x50 [i2c_core]
[ 1206.702084] [<f8059630>] ? i2c_del_adapter+0x1f0/0x1f0 [i2c_core]
[ 1206.702132] [<f80593bf>] i2c_register_driver+0x4f/0xa0 [i2c_core]
[ 1206.702149] [<c1066c65>] ? notifier_call_chain.isra.0+0x45/0x60
[ 1206.702163] [<f8710012>] eeprom_init+0x12/0x14 [eeprom]
[ 1206.702176] [<c1001120>] do_one_initcall+0x30/0x170
[ 1206.702204] [<f8710000>] ? 0xf870ffff
[ 1206.702218] [<c107b453>] sys_init_module+0xe03/0x1a20
[ 1206.702338] [<c1330edf>] sysenter_do_call+0x12/0x28
[ 1206.702354] Sched Debug Version: v0.10, 2.6.39-ARCH #1
[ 1206.702363] ktime : 1206702.352548
[ 1206.702371] sched_clk : 1205697.782307
[ 1206.702379] cpu_clk : 1206702.350662
[ 1206.702386] jiffies : 272010
[ 1206.702392] sched_clock_stable : 0
[ 1206.702398]
[ 1206.702401] sysctl_sched
[ 1206.702407] .sysctl_sched_latency : 12.000000
[ 1206.702415] .sysctl_sched_min_granularity : 1.500000
[ 1206.702423] .sysctl_sched_wakeup_granularity : 2.000000
[ 1206.702430] .sysctl_sched_child_runs_first : 0
[ 1206.702436] .sysctl_sched_features : 7279
[ 1206.702444] .sysctl_sched_tunable_scaling : 1 (logaritmic)
[ 1206.702452]
[ 1206.702455] cpu#0, 1596.132 MHz
[ 1206.702460] .nr_running : 3
[ 1206.702466] .load : 2729
[ 1206.702472] .nr_switches : 1666116
[ 1206.702478] .nr_load_updates : 220382
[ 1206.702484] .nr_uninterruptible : 1
[ 1206.702490] .next_balance : 0.272012
[ 1206.702497] .curr->pid : 4201
[ 1206.702505] .clock : 1206700.465859
[ 1206.702511] .cpu_load[0] : 541
[ 1206.702517] .cpu_load[1] : 516
[ 1206.702523] .cpu_load[2] : 322
[ 1206.702529] .cpu_load[3] : 197
[ 1206.702536] .cpu_load[4] : 144
[ 1206.702545]
[ 1206.702547] cfs_rq[0]:/autogroup-37
[ 1206.702554] .exec_clock : 0.000000
[ 1206.702562] .MIN_vruntime : 0.000001
[ 1206.702569] .min_vruntime : 4993.594736
[ 1206.702576] .max_vruntime : 0.000001
[ 1206.702583] .spread : 0.000000
[ 1206.702590] .spread0 : -892796.751521
[ 1206.702597] .nr_spread_over : 0
[ 1206.702603] .nr_running : 1
[ 1206.702610] .load : 1024
[ 1206.702617] .load_avg : 0.000000
[ 1206.702624] .load_period : 9.999999
[ 1206.702630] .load_contrib : 0
[ 1206.702637] .load_tg : 0
[ 1206.702645] .se->exec_start : 1206700.465859
[ 1206.702652] .se->vruntime : 897784.646895
[ 1206.702660] .se->sum_exec_runtime : 4949.823694
[ 1206.702666] .se->load.weight : 1024
[ 1206.702675]
[ 1206.702678] cfs_rq[0]:/autogroup-20
[ 1206.702684] .exec_clock : 0.000000
[ 1206.702692] .MIN_vruntime : 0.000001
[ 1206.702699] .min_vruntime : 82651.825963
[ 1206.702706] .max_vruntime : 0.000001
[ 1206.702713] .spread : 0.000000
[ 1206.702721] .spread0 : -815138.520294
[ 1206.702727] .nr_spread_over : 0
[ 1206.702733] .nr_running : 0
[ 1206.702740] .load : 0
[ 1206.702747] .load_avg : 6057.359872
[ 1206.702754] .load_period : 9.071832
[ 1206.702760] .load_contrib : 667
[ 1206.702767] .load_tg : 1574
[ 1206.702775] .se->exec_start : 1206700.003418
[ 1206.702783] .se->vruntime : 897790.346257
[ 1206.702790] .se->sum_exec_runtime : 82669.707003
[ 1206.702797] .se->load.weight : 2
[ 1206.702805]
[ 1206.702808] cfs_rq[0]:/autogroup-32
[ 1206.702814] .exec_clock : 0.000000
[ 1206.702822] .MIN_vruntime : 289034.537793
[ 1206.702829] .min_vruntime : 289035.678598
[ 1206.702837] .max_vruntime : 289034.537793
[ 1206.702844] .spread : 0.000000
[ 1206.702852] .spread0 : -608754.667659
[ 1206.702858] .nr_spread_over : 0
[ 1206.702865] .nr_running : 1
[ 1206.702871] .load : 1024
[ 1206.702877] .load_avg : 2606.827683
[ 1206.702884] .load_period : 7.060708
[ 1206.702891] .load_contrib : 394
[ 1206.702897] .load_tg : 909
[ 1206.702905] .se->exec_start : 1206699.263284
[ 1206.702913] .se->vruntime : 897785.937817
[ 1206.702920] .se->sum_exec_runtime : 472433.308035
[ 1206.702927] .se->load.weight : 681
[ 1206.702934]
[ 1206.702936] cfs_rq[0]:/
[ 1206.702942] .exec_clock : 0.000000
[ 1206.702950] .MIN_vruntime : 897784.346257
[ 1206.702958] .min_vruntime : 897790.346257
[ 1206.702965] .max_vruntime : 897785.937817
[ 1206.702972] .spread : 1.591560
[ 1206.702979] .spread0 : 0.000000
[ 1206.702986] .nr_spread_over : 0
[ 1206.702993] .nr_running : 3
[ 1206.702999] .load : 2729
[ 1206.703006] .load_avg : 0.000000
[ 1206.703013] .load_period : 0.000000
[ 1206.703019] .load_contrib : 0
[ 1206.703026] .load_tg : 0
[ 1206.703033]
[ 1206.703036] runnable tasks:
[ 1206.703039] task PID tree-key switches prio exec-runtime sum-exec sum-sleep
[ 1206.703044] ----------------------------------------------------------------------------------------------------------
[ 1206.703161] firefox 3926 289034.537793 264413 120 0 0 0.000000 0.000000 0.000000 /autogroup-32
[ 1206.703205] R bash 4201 4993.594736 118 120 0 0 0.000000 0.000000 0.000000 /autogroup-37
[ 1206.703232] kworker/0:3 4750 897784.346257 2597 120 0 0 0.000000 0.000000 0.000000 /
[ 1206.703256]
[ 1206.703258] cpu#1, 1596.132 MHz
[ 1206.703264] .nr_running : 3
[ 1206.703270] .load : 1478
[ 1206.703277] .nr_switches : 1715530
[ 1206.703283] .nr_load_updates : 200464
[ 1206.703290] .nr_uninterruptible : 0
[ 1206.703296] .next_balance : 0.272020
[ 1206.703302] .curr->pid : 3005
[ 1206.703310] .clock : 1206703.243963
[ 1206.703316] .cpu_load[0] : 1478
[ 1206.703322] .cpu_load[1] : 1026
[ 1206.703328] .cpu_load[2] : 633
[ 1206.703334] .cpu_load[3] : 397
[ 1206.703340] .cpu_load[4] : 292
[ 1206.703349]
[ 1206.703351] cfs_rq[1]:/autogroup-20
[ 1206.703357] .exec_clock : 0.000000
[ 1206.703365] .MIN_vruntime : 0.000001
[ 1206.703372] .min_vruntime : 72584.908065
[ 1206.703379] .max_vruntime : 0.000001
[ 1206.703386] .spread : 0.000000
[ 1206.703393] .spread0 : -825205.438192
[ 1206.703400] .nr_spread_over : 0
[ 1206.703406] .nr_running : 0
[ 1206.703412] .load : 1024
[ 1206.703419] .load_avg : 4124.161792
[ 1206.703427] .load_period : 5.380653
[ 1206.703432] .load_contrib : 774
[ 1206.703438] .load_tg : 1441
[ 1206.703446] .se->exec_start : 1206703.408312
[ 1206.703454] .se->vruntime : 919383.747396
[ 1206.703461] .se->sum_exec_runtime : 72594.153351
[ 1206.703467] .se->load.weight : 620
[ 1206.703475]
[ 1206.703478] cfs_rq[1]:/autogroup-9
[ 1206.703485] .exec_clock : 0.000000
[ 1206.703492] .MIN_vruntime : 0.000001
[ 1206.703499] .min_vruntime : 4998.478127
[ 1206.703506] .max_vruntime : 0.000001
[ 1206.703513] .spread : 0.000000
[ 1206.703516] .spread0 : -892791.868130
[ 1206.703516] .nr_spread_over : 0
[ 1206.703516] .nr_running : 0
[ 1206.703516] .load : 0
[ 1206.703516] .load_avg : 1279.999872
[ 1206.703516] .load_period : 8.070143
[ 1206.703516] .load_contrib : 158
[ 1206.703516] .load_tg : 158
[ 1206.703516] .se->exec_start : 1206681.362771
[ 1206.703516] .se->vruntime : 919375.864455
[ 1206.703516] .se->sum_exec_runtime : 2512.975151
[ 1206.703516] .se->load.weight : 2
[ 1206.703516]
[ 1206.703516] cfs_rq[1]:/autogroup-32
[ 1206.703516] .exec_clock : 0.000000
[ 1206.703516] .MIN_vruntime : 287717.141074
[ 1206.703516] .min_vruntime : 287720.953312
[ 1206.703516] .max_vruntime : 287717.141074
[ 1206.703516] .spread : 0.000000
[ 1206.703516] .spread0 : -610069.392945
[ 1206.703516] .nr_spread_over : 0
[ 1206.703516] .nr_running : 2
[ 1206.703516] .load : 2048
[ 1206.703516] .load_avg : 2929.511347
[ 1206.703516] .load_period : 5.367701
[ 1206.703516] .load_contrib : 515
[ 1206.703516] .load_tg : 909
[ 1206.703516] .se->exec_start : 1206703.534125
[ 1206.703516] .se->vruntime : 919387.199619
[ 1206.703516] .se->sum_exec_runtime : 464780.243939
[ 1206.703516] .se->load.weight : 858
[ 1206.703516]
[ 1206.703516] cfs_rq[1]:/
[ 1206.703516] .exec_clock : 0.000000
[ 1206.703516] .MIN_vruntime : 919383.908395
[ 1206.703516] .min_vruntime : 919387.199619
[ 1206.703516] .max_vruntime : 919383.908395
[ 1206.703516] .spread : 0.000000
[ 1206.703516] .spread0 : 21596.853362
[ 1206.703516] .nr_spread_over : 0
[ 1206.703516] .nr_running : 2
[ 1206.703516] .load : 1478
[ 1206.703516] .load_avg : 0.000000
[ 1206.703516] .load_period : 0.000000
[ 1206.703516] .load_contrib : 0
[ 1206.703516] .load_tg : 0
[ 1206.703516]
[ 1206.703516] runnable tasks:
[ 1206.703516] task PID tree-key switches prio exec-runtime sum-exec sum-sleep
[ 1206.703516] ----------------------------------------------------------------------------------------------------------
[ 1206.703516] X 3005 72585.005702 398233 120 0 0 0.000000 0.000000 0.000000 /autogroup-20
[ 1206.703516] R kwin 3673 287716.183317 287687 120 0 0 0.000000 0.000000 0.000000 /autogroup-32
[ 1206.703516] konsole 3749 287717.141074 12943 120 0 0 0.000000 0.000000 0.000000 /autogroup-32
[ 1206.703516]
-----------------------------------------------
>
> Thanks.
--
Marek Otahal :o)
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bug 35572] eeprom module: modprobing hangs
[not found] ` <20110602161742.1b22051a-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
@ 2011-06-02 20:30 ` Chris Wilson
0 siblings, 0 replies; 6+ messages in thread
From: Chris Wilson @ 2011-06-02 20:30 UTC (permalink / raw)
To: Jean Delvare, Marek Otahal
Cc: Andrew Morton, bugzilla-daemon-590EEB7GvNiWaY/ihj7yzEB+6BGkLq7r,
linux-i2c-u79uwXL29TY76Z2rM5mHXA, Keith Packard
On Thu, 2 Jun 2011 16:17:42 +0200, Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org> wrote:
> For the long term, I think that the i2c implementation of i915 should
> be reworked. Having two i2c adapters per actual bus, one for hardware
> controlled and one for software controlled, is confusing and dangerous.
> And creating a bus on the fly in the middle of a transaction is just as
> bad. If you really can't instantiate only the one you need, then you
> should instantiate the software controlled one (i2c_bit_add_adapter),
> then update the algorithm to switch to hardware controlled where
> possible, and ultimately undo that update if the hardware controller
> turns out to be non-working. I can't write the code as I don't have any
> supported piece of hardware and I'm not familiar with the code, but I
> can help review any patch if you want.
Reading email, in reverse order...
Thanks Jean, I will try to do you've outlined.
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-06-02 20:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <bug-35572-10286@https.bugzilla.kernel.org/>
[not found] ` <bug-35572-10286-3bo0kxnWaOQUvHkbgXJLS5sdmw4N0Rt+2LY78lusg7I@public.gmane.org/>
2011-06-01 21:42 ` [Bugme-new] [Bug 35572] New: eeprom module: modprobing hangs Andrew Morton
[not found] ` <20110601144240.9525825b.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2011-06-01 21:45 ` Andrew Morton
[not found] ` <20110601144552.32dc519e.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2011-06-02 8:40 ` [Bug 35572] " Jean Delvare
2011-06-02 15:53 ` [Bugme-new] [Bug 35572] New: " Marek Otahal
[not found] ` <201106021753.50961.markotahal-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-06-02 14:17 ` [Bug 35572] " Jean Delvare
[not found] ` <20110602161742.1b22051a-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-06-02 20:30 ` Chris Wilson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).