linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
To: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	"linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Rodolfo Giometti <giometti-k2GhghHVRtY@public.gmane.org>,
	Michael Lawnick <ml.lawnick-Mmb7MZpHnFY@public.gmane.org>,
	Peter Korsgaard
	<peter.korsgaard-ob4gmnvZ1/cAvxtiuMwx3w@public.gmane.org>
Subject: Re: [PATCH] i2c: reorganize muxes to a standard pattern
Date: Sun, 27 Nov 2011 14:04:57 -0800	[thread overview]
Message-ID: <20111127220456.GA526@ericsson.com> (raw)
In-Reply-To: <20111127214847.547542fb-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>

On Sun, Nov 27, 2011 at 03:48:47PM -0500, Jean Delvare wrote:
> Hi Wolfram,
> 
> Sorry for the late reply.
> 
> On Sun, 13 Nov 2011 22:41:14 +0100, Wolfram Sang wrote:
> > Analog to ca632f5 (spi: reorganize drivers), introduce a standard pattern
> > for naming the muxes. This is done for the rest of the I2C subsystem already, so
> > we stay in sync with that.
> > 
> > Signed-off-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> > ---
> > 
> > Only build tested.
> > 
> >  drivers/i2c/muxes/Kconfig                          |    9 ---------
> >  drivers/i2c/muxes/Makefile                         |    6 +++---
> >  .../i2c/muxes/{gpio-i2cmux.c => i2c-mux-gpio.c}    |    0
> >  drivers/i2c/muxes/{pca9541.c => i2c-mux-pca9541.c} |    0
> >  drivers/i2c/muxes/{pca954x.c => i2c-mux-pca954x.c} |    0
> >  5 files changed, 3 insertions(+), 12 deletions(-)
> >  rename drivers/i2c/muxes/{gpio-i2cmux.c => i2c-mux-gpio.c} (100%)
> >  rename drivers/i2c/muxes/{pca9541.c => i2c-mux-pca9541.c} (100%)
> >  rename drivers/i2c/muxes/{pca954x.c => i2c-mux-pca954x.c} (100%)
> 
> You forgot to rename Documentation/i2c/muxes/gpio-i2cmux.
> 
> I thought the naming had been discussed before, but I can't find the
> references, and to be honest the new names please me, so I have no
> reason to decline your proposal. I would have appreciated an ack from
> the driver authors (Cc'd) though. I'll apply your patch as soon as I
> receive an updated version, unless I get an objection before then.
> 

For pca9541.c:

Acked-by: Guenter Roeck <guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>

> > 
> > diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
> > index 90b7a01..a112d9d 100644
> > --- a/drivers/i2c/muxes/Kconfig
> > +++ b/drivers/i2c/muxes/Kconfig
> > @@ -14,9 +14,6 @@ config I2C_MUX_GPIO
> >  	  I2C busses connected through a MUX, which is controlled
> >  	  through GPIO pins.
> >  
> > -	  This driver can also be built as a module.  If so, the module
> > -	  will be called gpio-i2cmux.
> > -
> >  config I2C_MUX_PCA9541
> >  	tristate "NXP PCA9541 I2C Master Selector"
> >  	depends on EXPERIMENTAL
> > @@ -24,9 +21,6 @@ config I2C_MUX_PCA9541
> >  	  If you say yes here you get support for the NXP PCA9541
> >  	  I2C Master Selector.
> >  
> > -	  This driver can also be built as a module.  If so, the module
> > -	  will be called pca9541.
> > -
> >  config I2C_MUX_PCA954x
> >  	tristate "Philips PCA954x I2C Mux/switches"
> >  	depends on EXPERIMENTAL
> > @@ -34,7 +28,4 @@ config I2C_MUX_PCA954x
> >  	  If you say yes here you get support for the Philips PCA954x
> >  	  I2C mux/switch devices.
> >  
> > -	  This driver can also be built as a module.  If so, the module
> > -	  will be called pca954x.
> > -
> >  endmenu
> > diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
> > index 4640436..5826249 100644
> > --- a/drivers/i2c/muxes/Makefile
> > +++ b/drivers/i2c/muxes/Makefile
> > @@ -1,8 +1,8 @@
> >  #
> >  # Makefile for multiplexer I2C chip drivers.
> >  
> > -obj-$(CONFIG_I2C_MUX_GPIO)	+= gpio-i2cmux.o
> > -obj-$(CONFIG_I2C_MUX_PCA9541)	+= pca9541.o
> > -obj-$(CONFIG_I2C_MUX_PCA954x)	+= pca954x.o
> > +obj-$(CONFIG_I2C_MUX_GPIO)	+= i2c-mux-gpio.o
> > +obj-$(CONFIG_I2C_MUX_PCA9541)	+= i2c-mux-pca9541.o
> > +obj-$(CONFIG_I2C_MUX_PCA954x)	+= i2c-mux-pca954x.o
> >  
> >  ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
> > diff --git a/drivers/i2c/muxes/gpio-i2cmux.c b/drivers/i2c/muxes/i2c-mux-gpio.c
> > similarity index 100%
> > rename from drivers/i2c/muxes/gpio-i2cmux.c
> > rename to drivers/i2c/muxes/i2c-mux-gpio.c
> > diff --git a/drivers/i2c/muxes/pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
> > similarity index 100%
> > rename from drivers/i2c/muxes/pca9541.c
> > rename to drivers/i2c/muxes/i2c-mux-pca9541.c
> > diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
> > similarity index 100%
> > rename from drivers/i2c/muxes/pca954x.c
> > rename to drivers/i2c/muxes/i2c-mux-pca954x.c
> 
> 
> -- 
> Jean Delvare

      parent reply	other threads:[~2011-11-27 22:04 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-13 21:41 [PATCH] i2c: reorganize muxes to a standard pattern Wolfram Sang
     [not found] ` <1321220474-11378-1-git-send-email-w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-11-21 12:52   ` Wolfram Sang
2011-11-27 20:48   ` Jean Delvare
     [not found]     ` <20111127214847.547542fb-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-11-27 21:15       ` Peter Korsgaard
     [not found]         ` <87sjl9gtcv.fsf-uXGAPMMVk8amE9MCos8gUmSdvHPH+/yF@public.gmane.org>
2011-11-28  8:22           ` Jean Delvare
     [not found]             ` <20111128092227.3d5d6a25-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-11-28  9:38               ` Wolfram Sang
     [not found]                 ` <20111128093835.GA4243-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2011-11-28  9:58                   ` Peter Korsgaard
     [not found]                     ` <874nxoh8l5.fsf-uXGAPMMVk8amE9MCos8gUmSdvHPH+/yF@public.gmane.org>
2011-11-28 11:57                       ` Jean Delvare
     [not found]                         ` <20111128125751.3d6a3ca7-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2012-01-07 14:38                           ` Jean Delvare
     [not found]                             ` <20120107153820.45ed4b37-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2012-01-07 14:46                               ` Wolfram Sang
     [not found]                                 ` <20120107144559.GA2537-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-01-07 14:51                                   ` Jean Delvare
2012-03-31  6:21                                   ` Jean Delvare
     [not found]                                     ` <20120331082112.2fcc13c3-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2012-03-31  6:56                                       ` Wolfram Sang
     [not found]                                         ` <20120331065641.GA9211-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-03-31  9:18                                           ` Peter Korsgaard
2011-11-27 22:04       ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111127220456.GA526@ericsson.com \
    --to=guenter.roeck-izefyvvap7pwk0htik3j/w@public.gmane.org \
    --cc=giometti-k2GhghHVRtY@public.gmane.org \
    --cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=ml.lawnick-Mmb7MZpHnFY@public.gmane.org \
    --cc=peter.korsgaard-ob4gmnvZ1/cAvxtiuMwx3w@public.gmane.org \
    --cc=w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).