From: Guenter Roeck <guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
To: "Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org"
<Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: "ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org"
<ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>,
"khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org"
<khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
"linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Tang Yuantian <B29983-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: Re: [PATCH] i2c/busses: (mpc) Add support for SMBUS_READ_BLOCK_DATA
Date: Mon, 12 Dec 2011 01:28:06 -0800 [thread overview]
Message-ID: <20111212092806.GA6889@ericsson.com> (raw)
In-Reply-To: <1323663010-32223-1-git-send-email-Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
On Sun, Dec 11, 2011 at 11:10:10PM -0500, Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:
> From: Tang Yuantian <B29983-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>
> Add support for SMBUS_READ_BLOCK_DATA to the i2c-mpc bus driver.
>
> Signed-off-by: Tang Yuantian <Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Signed-off-by: Guenter Roeck <guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
You can not do this. While I may have written this patch originally,
I abandoned it, and you can not use my signature.
Guenter
> ---
> tested on p1022ds
>
> drivers/i2c/busses/i2c-mpc.c | 63 ++++++++++++++++++++++++++++++++---------
> 1 files changed, 49 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index 107397a..bba9a07 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -454,7 +454,7 @@ static int mpc_write(struct mpc_i2c *i2c, int target,
> }
>
> static int mpc_read(struct mpc_i2c *i2c, int target,
> - u8 *data, int length, int restart)
> + u8 *data, int length, int restart, bool recv_len)
> {
> unsigned timeout = i2c->adap.timeout;
> int i, result;
> @@ -470,7 +470,7 @@ static int mpc_read(struct mpc_i2c *i2c, int target,
> return result;
>
> if (length) {
> - if (length == 1)
> + if (length == 1 && !recv_len)
> writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
> else
> writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
> @@ -479,17 +479,46 @@ static int mpc_read(struct mpc_i2c *i2c, int target,
> }
>
> for (i = 0; i < length; i++) {
> + u8 byte;
> +
> result = i2c_wait(i2c, timeout, 0);
> if (result < 0)
> return result;
>
> - /* Generate txack on next to last byte */
> - if (i == length - 2)
> - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
> - /* Do not generate stop on last byte */
> - if (i == length - 1)
> - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX);
> - data[i] = readb(i2c->base + MPC_I2C_DR);
> + /*
> + * For block reads, we have to know the total length (1st byte)
> + * before we can determine if we are done.
> + */
> + if (i || !recv_len) {
> + /* Generate txack on next to last byte */
> + if (i == length - 2)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_TXAK);
> + /* Do not generate stop on last byte */
> + if (i == length - 1)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_MTX);
> + }
> +
> + byte = readb(i2c->base + MPC_I2C_DR);
> +
> + /*
> + * Adjust length if first received byte is length.
> + * The length is 1 length byte plus actually data length
> + */
> + if (i == 0 && recv_len) {
> + if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX)
> + return -EPROTO;
> + length += byte;
> + /*
> + * For block reads, generate txack here if data length
> + * is 1 byte (total length is 2 bytes).
> + */
> + if (length == 2)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_TXAK);
> + }
> + data[i] = byte;
> }
>
> return length;
> @@ -532,12 +561,17 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
> "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
> pmsg->flags & I2C_M_RD ? "read" : "write",
> pmsg->len, pmsg->addr, i + 1, num);
> - if (pmsg->flags & I2C_M_RD)
> - ret =
> - mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
> - else
> + if (pmsg->flags & I2C_M_RD) {
> + bool recv_len = pmsg->flags & I2C_M_RECV_LEN;
> +
> + ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i,
> + recv_len);
> + if (recv_len && ret > 0)
> + pmsg->len = ret;
> + } else {
> ret =
> mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
> + }
> }
> mpc_i2c_stop(i2c);
> return (ret < 0) ? ret : num;
> @@ -545,7 +579,8 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
>
> static u32 mpc_functionality(struct i2c_adapter *adap)
> {
> - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
> + | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
> }
>
> static const struct i2c_algorithm mpc_algo = {
> --
> 1.6.4
>
>
next prev parent reply other threads:[~2011-12-12 9:28 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-12 4:10 [PATCH] i2c/busses: (mpc) Add support for SMBUS_READ_BLOCK_DATA Yuantian.tang-KZfg59tc24xl57MIdRCFDg
[not found] ` <1323663010-32223-1-git-send-email-Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-12-12 9:28 ` Guenter Roeck [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-11-15 6:27 Guenter Roeck
[not found] ` <1321338462-6138-1-git-send-email-guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
2011-11-15 8:54 ` Jean Delvare
[not found] ` <20111115095445.3d34e99e-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-11-15 16:29 ` Guenter Roeck
2011-11-15 19:02 ` Tabi Timur-B04825
[not found] ` <CAOZdJXVq=0pbrPM_-+Kjf3NhON8oN3Me64R6c9qBiAEFuRsDOw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-11-15 19:14 ` Guenter Roeck
2011-11-15 20:05 ` Jean Delvare
[not found] ` <20111115210528.0f9a0948-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-11-15 21:14 ` Guenter Roeck
[not found] ` <CAOZdJXUPO5PyMkAw-2EPvy_qSUuqsgUA7Gr8mKUX7HyShoXk3g@mail.gmail.com>
[not found] ` <E6AF40B3BFC8A9428EACB47497F0F4B62DC687@039-SN1MPN1-002.039d.mgd.msft.net>
[not found] ` <ECEE0D23-8F53-402C-A97F-4DB0F0E9C79B@freescale.com>
[not found] ` <ECEE0D23-8F53-402C-A97F-4DB0F0E9C79B-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-11-16 17:28 ` York Sun
2011-11-16 17:36 ` Guenter Roeck
2011-11-16 17:55 ` York Sun
2011-11-16 18:09 ` Guenter Roeck
2011-11-16 18:09 ` Jean Delvare
2011-11-16 18:20 ` York Sun
2011-11-16 18:51 ` Guenter Roeck
2011-11-16 18:56 ` Timur Tabi
2011-11-16 18:58 ` sun york-R58495
2011-11-16 19:10 ` Jean Delvare
[not found] ` <20111116201048.4b7877dd-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-11-16 19:15 ` York Sun
2011-11-16 19:18 ` Jean Delvare
2011-11-16 19:24 ` York Sun
2011-11-17 18:18 ` Guenter Roeck
2011-11-17 19:23 ` York Sun
2011-11-18 3:15 ` Tang Yuantian-B29983
[not found] ` <20111116201847.6b11dc7f-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-12-01 7:06 ` Tang Yuantian-B29983
2011-12-07 2:52 ` Tang Yuantian-B29983
[not found] ` <3C06C26914DACA4BB3A368F78CA0B3A7134583-TcFNo7jSaXM0vywKSws3iq4g8xLGJsHaLnY5E4hWTkheoWH0uzbU5w@public.gmane.org>
2011-12-07 3:20 ` Guenter Roeck
2011-12-07 5:25 ` Tang Yuantian-B29983
[not found] ` <3C06C26914DACA4BB3A368F78CA0B3A71345F2-TcFNo7jSaXM0vywKSws3iq4g8xLGJsHaLnY5E4hWTkheoWH0uzbU5w@public.gmane.org>
2011-12-07 7:29 ` Jean Delvare
[not found] ` <20111207082924.2f88bd5d-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2012-02-23 6:57 ` Huang Changming-R66093
2011-11-16 17:38 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111212092806.GA6889@ericsson.com \
--to=guenter.roeck-izefyvvap7pwk0htik3j/w@public.gmane.org \
--cc=B29983-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).