From: Ben Dooks <ben-i2c-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: Mark Brown
<broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 2/2] i2c-s3c2410: Add stub runtime power management
Date: Mon, 13 Feb 2012 23:39:48 +0000 [thread overview]
Message-ID: <20120213233948.GM2999@freya.fluff.org> (raw)
In-Reply-To: <1327152527-11364-2-git-send-email-broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
On Sat, Jan 21, 2012 at 01:28:47PM +0000, Mark Brown wrote:
> Add stub runtime_pm calls which go through the flow of enabling and
> disabling but don't actually do anything with the device itself as
> there's nothing useful we can do. This provides the core PM framework
> with information about when the device is idle, enabling chip wide
> power savings.
>
> Signed-off-by: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
> Acked-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
I've applied these two to for-34/i2c/i2c-samsung and will start a -next
branch later in the week
> ---
> drivers/i2c/busses/i2c-s3c2410.c | 10 ++++++++++
> 1 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
> index e6f982b..737f721 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -31,6 +31,7 @@
> #include <linux/errno.h>
> #include <linux/err.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> #include <linux/clk.h>
> #include <linux/cpufreq.h>
> #include <linux/slab.h>
> @@ -564,6 +565,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
> int retry;
> int ret;
>
> + pm_runtime_get_sync(&adap->dev);
> clk_enable(i2c->clk);
>
> for (retry = 0; retry < adap->retries; retry++) {
> @@ -572,6 +574,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
>
> if (ret != -EAGAIN) {
> clk_disable(i2c->clk);
> + pm_runtime_put_sync(&adap->dev);
> return ret;
> }
>
> @@ -581,6 +584,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
> }
>
> clk_disable(i2c->clk);
> + pm_runtime_put_sync(&adap->dev);
> return -EREMOTEIO;
> }
>
> @@ -1013,6 +1017,9 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
> of_i2c_register_devices(&i2c->adap);
> platform_set_drvdata(pdev, i2c);
>
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_enable(&i2c->adap.dev);
> +
> dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
> clk_disable(i2c->clk);
> return 0;
> @@ -1047,6 +1054,9 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
> {
> struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
>
> + pm_runtime_disable(&i2c->adap.dev);
> + pm_runtime_disable(&pdev->dev);
> +
> s3c24xx_i2c_deregister_cpufreq(i2c);
>
> i2c_del_adapter(&i2c->adap);
> --
> 1.7.7.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-02-13 23:39 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-21 13:28 [PATCH 1/2] i2c-s3c2410: Convert to devm_kzalloc() Mark Brown
2012-01-21 15:59 ` Sylwester Nawrocki
[not found] ` <1327152527-11364-1-git-send-email-broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2012-01-21 13:28 ` [PATCH 2/2] i2c-s3c2410: Add stub runtime power management Mark Brown
2012-01-21 15:52 ` Sylwester Nawrocki
2012-01-21 18:31 ` Mark Brown
2012-01-21 20:38 ` Sylwester Nawrocki
[not found] ` <4F1B2235.4000009-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-01-21 21:23 ` Mark Brown
2012-01-21 21:23 ` Heiko Stübner
2012-01-21 21:33 ` Sylwester Nawrocki
[not found] ` <4F1B2F38.9050708-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-01-21 21:57 ` Mark Brown
2012-01-21 22:49 ` Sylwester Nawrocki
2012-01-21 23:10 ` Mark Brown
[not found] ` <1327152527-11364-2-git-send-email-broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2012-02-13 23:39 ` Ben Dooks [this message]
2012-01-21 16:10 ` [PATCH 1/2] i2c-s3c2410: Convert to devm_kzalloc() Sylwester Nawrocki
2012-01-21 17:57 ` Mark Brown
2012-01-21 18:27 ` Sylwester Nawrocki
[not found] ` <4F1B0394.8050003-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-01-21 18:36 ` Mark Brown
[not found] ` <4F1AE36E.3070403-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-02-13 23:38 ` Ben Dooks
2012-02-14 13:03 ` Shubhrajyoti Datta
2012-02-14 13:52 ` Sylwester Nawrocki
2012-01-29 5:14 ` Barry Song
-- strict thread matches above, loose matches on Subject: below --
2011-12-05 14:06 Mark Brown
[not found] ` <1323093966-9045-1-git-send-email-broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-05 14:06 ` [PATCH 2/2] i2c-s3c2410: Add stub runtime power management Mark Brown
2011-12-13 14:53 ` Heiko Stübner
2011-12-13 15:06 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120213233948.GM2999@freya.fluff.org \
--to=ben-i2c-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).