From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: identify i2c Date: Mon, 21 May 2012 07:57:19 +0200 Message-ID: <20120521075719.321fa1b3@endymion.delvare> References: <4FB952EB.1050505@lockie.ca> <20120520230047.45aaa1c0@endymion.delvare> <4FB95F5A.30003@lockie.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4FB95F5A.30003-ozXLQgHQwDP3fQ9qLvQP4Q@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: James Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-i2c@vger.kernel.org On Sun, 20 May 2012 17:17:14 -0400, James wrote: > On 05/20/12 17:00, Jean Delvare wrote: > > On Sun, 20 May 2012 16:24:11 -0400, James wrote: > >>> # decode-dimms > >>> # decode-dimms version 5929 (2011-02-16 14:58:38 +0100) > >>> > >>> Memory Serial Presence Detect Decoder > >>> By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner, > >>> Jean Delvare, Trent Piepho and others > >>> No EEPROM found, are you sure the eeprom module is loaded? > >> > >> How do I find out what to configure in a 3.4 kernel? > > > > CONFIG_I2C=y > > CONFIG_EEPROM_LEGACY=m > > > > Plus CONFIG_I2C_=m. "lspci | grep SMBus" etc. might > > tell you which it is. > > > > How do I find CONFIG_EEPROM_LEGACY in menuconfig? You run "make menuconfig" then type /EEPROM_LEGACY, it will tell you where it is. > I manually changed it in .config :-) -- Jean Delvare