Re: [PATCH V2 3/4] i2c: tegra: support for I2C_M_NOSTART functionality

[Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1053 bytes --]

On Tue, Jun 12, 2012 at 04:07:30PM +0530, Laxman Dewangan wrote:
> Adding support for functionality I2C_M_NOSTART.
> When multiple message transfer request made through i2c
> and if any message is flagged with I2C_M_NOSTART then
> it will not send the start/repeat-start and address of
> that message i.e. sends data directly.
> 
> Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> This is rebased of earlier patch on same support.
> At this time using the new flag I2C_FUNC_NOSTART.
> 
> No change from V1.

There is a change. It is now dependant on the clk_prepare_enable change
which will go in via arm-soc as discussed previously. Can you resend
please?

> @@ -564,8 +579,14 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
>  
>  	clk_prepare_enable(i2c_dev->clk);

^^^^

Thanks,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]