Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data

[Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1266 bytes --]

On Wed, Dec 19, 2012 at 05:07:09PM +0100, Christian Gmeiner wrote:
> I have a at24 EEPROM connected via i2c bus provided by ISCH i2c
> bus driver. This bus driver does not support
> I2C_FUNC_SMBUS_WRITE_I2C_BLOCK and so I was looking for a way
> to be able to write the eeprom. This patch adds support for
> I2C_SMBUS_BYTE_DATA writing via i2c_smbus_write_byte_data.
> It is quite slow, but it works.
> 
> Signed-off-by: Christian Gmeiner <christian.gmeiner-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/misc/eeprom/at24.c | 35 +++++++++++++++++++++++++++++------
>  1 file changed, 29 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> index 2baeec5..723b411 100644
> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c
> @@ -56,6 +56,7 @@ struct at24_data {
>  	struct at24_platform_data chip;
>  	struct memory_accessor macc;
>  	int use_smbus;
> +	int use_smbuse_write;

Can't you use the same 'use_smbus' variable and do a similar switch-case
as in the read function?

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]