[PATCH v3] i2c-i801: Add Device IDs for Intel Wellsburg PCH

[PATCH v3] i2c-i801: Add Device IDs for Intel Wellsburg PCH

[James Ralston]

This patch adds the SMBus Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
Change notes for v3:
*The additional Device IDs added in v2 are for the SMBus MS Unit and are referred to as SMBus_MS*. These devices are similar to the Patsburg IDF in functionality, however they are referred to as MS Unit devices in the External Design Specification.

 Documentation/i2c/busses/i2c-i801 |    1 +
 drivers/i2c/busses/Kconfig        |    1 +
 drivers/i2c/busses/i2c-i801.c     |   15 +++++++++++++++
 3 files changed, 17 insertions(+), 0 deletions(-)

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 8d71d57..d55b8ab 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -23,6 +23,7 @@ Supported adapters:
   * Intel Lynx Point (PCH)
   * Intel Lynx Point-LP (PCH)
   * Intel Avoton (SOC)
+  * Intel Wellsburg (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 77d2887..059a481 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -107,6 +107,7 @@ config I2C_I801
 	    Lynx Point (PCH)
 	    Lynx Point-LP (PCH)
 	    Avoton (SOC)
+	    Wellsburg (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index b00c29d..76febfb 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -54,6 +54,10 @@
   Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
   Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
   Avoton (SOC)          0x1f3c     32     hard     yes     yes     yes
+  Wellsburg (PCH)       0x8d22     32     hard     yes     yes     yes
+  Wellsburg (PCH) MS    0x8d7d     32     hard     yes     yes     yes
+  Wellsburg (PCH) MS    0x8d7e     32     hard     yes     yes     yes
+  Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -167,6 +171,10 @@
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS	0x8d22
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0	0x8d7d
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1	0x8d7e
+#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2	0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
 
 struct i801_mux_config {
@@ -801,6 +809,10 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
 	{ 0, }
 };
 
@@ -1106,6 +1118,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
 	case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
+	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
 		priv->features |= FEATURE_IDF;
 		/* fall through */
 	default:
-- 
1.7.7.6

Re: [PATCH v3] i2c-i801: Add Device IDs for Intel Wellsburg PCH

[Jean Delvare]

On Thu, 14 Feb 2013 11:15:33 -0800, James Ralston wrote:
> This patch adds the SMBus Device IDs for the Intel Wellsburg PCH
> 
> Signed-off-by: James Ralston <james.d.ralston@intel.com>
> ---
> Change notes for v3:
> *The additional Device IDs added in v2 are for the SMBus MS Unit and are referred to as SMBus_MS*. These devices are similar to the Patsburg IDF in functionality, however they are referred to as MS Unit devices in the External Design Specification.
> 
>  Documentation/i2c/busses/i2c-i801 |    1 +
>  drivers/i2c/busses/Kconfig        |    1 +
>  drivers/i2c/busses/i2c-i801.c     |   15 +++++++++++++++
>  3 files changed, 17 insertions(+), 0 deletions(-)
> (...)

Perfect, thanks James.

Reviewed-by: Jean Delvare <khali@linux-fr.org>

-- 
Jean Delvare