From mboxrd@z Thu Jan  1 00:00:00 1970
From: Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: Re: [5/7] i2c-designware: enable/disable the controller properly
Date: Tue, 9 Apr 2013 12:28:36 +0300
Message-ID: <20130409092836.GG21818@intel.com>
References: <1363867800-23861-5-git-send-email-mika.westerberg@linux.intel.com>
 <20130409090914.GD28509@the-dreams.de>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20130409090914.GD28509@the-dreams.de>
Sender: linux-kernel-owner@vger.kernel.org
To: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, ben-linux@fluff.org, Jean Delvare <khali@linux-fr.org>, Andy Shevchenko <andriy.shevchenko@linux.intel.com>, Christian Ruppert <christian.ruppert@abilis.com>
List-Id: linux-i2c@vger.kernel.org

On Tue, Apr 09, 2013 at 11:09:14AM +0200, Wolfram Sang wrote:
> 
> > +static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
> > +{
> > +	int timeout = 100;
> > +
> > +	do {
> > +		dw_writel(dev, enable, DW_IC_ENABLE);
> > +		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
> > +			return;
> > +
> > +		usleep_range(25, 250);
> 
> This would wait 25ms max. Is there a timeout value specified in the docs?

The datasheet says something like:

	1. Define a timer interval (t_i2c_poll) equal 10 times the highest
	signaling period. For 400kHz this is 25us.

	2. Define max timeout parameter, MAX_T_POLL_COUNT, such that if any
	repeated operation exeeds this maximum, an error is reported.

In this case I have:

	t_i2c_poll = 25 (to 250 us)
	MAX_T_POLL_COUNT = 100

> > +	} while (timeout-- > 0);
> 
> while (timeout--)?

OK, thanks.