[PATCH 0/3] ARM: at91: move to generic DMA device tree bindings

[PATCH 0/3] ARM: at91: move to generic DMA device tree bindings

[ludovic.desroches]

From: Ludovic Desroches <ludovic.desroches@atmel.com>

Hi,

This set of patches introduces DMA device tree bindings support for the atmel
DMA controller and first driver conversions.

I'll send an update of dts file in the next version if there is no major issue
with the bindings.

Regards


Ludovic Desroches (3):
  at_hdmac: move to generic DMA binding
  i2c: at91: convert to dma_request_slave_channel_compat()
  mci: at91: convert to dma_request_slave_channel_compat()

 .../devicetree/bindings/dma/atmel-dma.txt          | 26 +++++-
 arch/arm/boot/dts/sama5d3.dtsi                     |  4 +-
 drivers/dma/at_hdmac.c                             | 93 ++++++++++++++++++++--
 drivers/dma/at_hdmac_regs.h                        |  4 +
 drivers/i2c/busses/i2c-at91.c                      | 49 ++++++------
 drivers/mmc/host/atmel-mci.c                       | 25 +++---
 6 files changed, 154 insertions(+), 47 deletions(-)

-- 
1.7.11.3

[PATCH 1/3] at_hdmac: move to generic DMA binding

[ludovic.desroches]

From: Ludovic Desroches <ludovic.desroches@atmel.com>

Update at_hdmac driver to support generic DMA device tree binding. Devices
can still request channel with dma_request_channel() then it doesn't break
DMA for non DT boards.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
 .../devicetree/bindings/dma/atmel-dma.txt          | 26 +++++-
 arch/arm/boot/dts/sama5d3.dtsi                     |  4 +-
 drivers/dma/at_hdmac.c                             | 93 ++++++++++++++++++++--
 drivers/dma/at_hdmac_regs.h                        |  4 +
 4 files changed, 117 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
index 3c046ee..4179bd2 100644
--- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -4,11 +4,33 @@ Required properties:
 - compatible: Should be "atmel,<chip>-dma"
 - reg: Should contain DMA registers location and length
 - interrupts: Should contain DMA interrupt
+- #dma-cells: Must be <2>
 
-Examples:
+Example:
 
-dma@ffffec00 {
+dma0: dma@ffffec00 {
 	compatible = "atmel,at91sam9g45-dma";
 	reg = <0xffffec00 0x200>;
 	interrupts = <21>;
+	#dma-cells = <2>;
+};
+
+DMA clients connected to the Atmel DMA controller must use the format
+described in the dma.txt file, using a three-cell specifier for each channel.
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller
+2. The memory interface (16 most significant bits), the peripheral interface
+(16 less significant bits)
+3. The peripheral identifier (can be different for tx and rx)
+
+Example:
+
+i2c0@i2c@f8010000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8010000 0x100>;
+	interrupts = <9 4 6>;
+	dmas = <&dma0 1 7>,
+	       <&dma0 1 8>;
+	dma-names = "tx", "rx"
 };
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 39b0458..95c00a3 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -348,14 +348,14 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe600 0x200>;
 				interrupts = <30 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller@ffffe800 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe800 0x200>;
 				interrupts = <31 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			ramc0: ramc@ffffea00 {
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 8415467..d5f7a1b 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_dma.h>
 
 #include "at_hdmac_regs.h"
 #include "dmaengine.h"
@@ -676,7 +677,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		ctrlb |=  ATC_DST_ADDR_MODE_FIXED
 			| ATC_SRC_ADDR_MODE_INCR
 			| ATC_FC_MEM2PER
-			| ATC_SIF(AT_DMA_MEM_IF) | ATC_DIF(AT_DMA_PER_IF);
+			| ATC_SIF(atchan->mem_if) | ATC_DIF(atchan->per_if);
 		reg = sconfig->dst_addr;
 		for_each_sg(sgl, sg, sg_len, i) {
 			struct at_desc	*desc;
@@ -715,7 +716,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		ctrlb |=  ATC_DST_ADDR_MODE_INCR
 			| ATC_SRC_ADDR_MODE_FIXED
 			| ATC_FC_PER2MEM
-			| ATC_SIF(AT_DMA_PER_IF) | ATC_DIF(AT_DMA_MEM_IF);
+			| ATC_SIF(atchan->per_if) | ATC_DIF(atchan->mem_if);
 
 		reg = sconfig->src_addr;
 		for_each_sg(sgl, sg, sg_len, i) {
@@ -821,8 +822,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
 		desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED
 				| ATC_SRC_ADDR_MODE_INCR
 				| ATC_FC_MEM2PER
-				| ATC_SIF(AT_DMA_MEM_IF)
-				| ATC_DIF(AT_DMA_PER_IF);
+				| ATC_SIF(atchan->mem_if)
+				| ATC_DIF(atchan->per_if);
 		break;
 
 	case DMA_DEV_TO_MEM:
@@ -832,8 +833,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
 		desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR
 				| ATC_SRC_ADDR_MODE_FIXED
 				| ATC_FC_PER2MEM
-				| ATC_SIF(AT_DMA_PER_IF)
-				| ATC_DIF(AT_DMA_MEM_IF);
+				| ATC_SIF(atchan->per_if)
+				| ATC_DIF(atchan->mem_if);
 		break;
 
 	default:
@@ -1189,6 +1190,67 @@ static void atc_free_chan_resources(struct dma_chan *chan)
 	dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
 }
 
+static bool at_dma_filter(struct dma_chan *chan, void *slave)
+{
+	struct at_dma_slave *atslave = slave;
+
+	if (atslave->dma_dev == chan->device->dev) {
+		chan->private = atslave;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+#ifdef CONFIG_OF
+static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
+				     struct of_dma *of_dma)
+{
+	struct dma_chan *chan;
+	struct at_dma_chan *atchan;
+	struct at_dma_slave *atslave;
+	dma_cap_mask_t mask;
+	unsigned int per_id;
+	struct platform_device *dmac_pdev;
+
+	if (dma_spec->args_count != 2)
+		return NULL;
+
+	dmac_pdev = of_find_device_by_node(dma_spec->np);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL);
+	if (!atslave)
+		return NULL;
+	/*
+	 * We can fill both SRC_PER and DST_PER, one of these fields will be
+	 * ignored depending on DMA transfer direction.
+	 */
+	per_id = dma_spec->args[1];
+	atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_DST_H2SEL_HW
+		      | ATC_SRC_H2SEL_HW | ATC_DST_PER(per_id)
+		      | ATC_SRC_PER(per_id);
+	atslave->dma_dev = &dmac_pdev->dev;
+
+	chan = dma_request_channel(mask, at_dma_filter, atslave);
+	if (!chan)
+		return NULL;
+
+	atchan = to_at_dma_chan(chan);
+	atchan->per_if = dma_spec->args[0] & 0xff;
+	atchan->mem_if = (dma_spec->args[0] >> 16) & 0xff;
+
+	return chan;
+}
+#else
+static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
+				     struct of_dma *of_dma)
+{
+	return NULL;
+}
+#endif
 
 /*--  Module Management  -----------------------------------------------*/
 
@@ -1343,6 +1405,8 @@ static int __init at_dma_probe(struct platform_device *pdev)
 	for (i = 0; i < plat_dat->nr_channels; i++) {
 		struct at_dma_chan	*atchan = &atdma->chan[i];
 
+		atchan->mem_if = AT_DMA_MEM_IF;
+		atchan->per_if = AT_DMA_PER_IF;
 		atchan->chan_common.device = &atdma->dma_common;
 		dma_cookie_init(&atchan->chan_common);
 		list_add_tail(&atchan->chan_common.device_node,
@@ -1389,8 +1453,25 @@ static int __init at_dma_probe(struct platform_device *pdev)
 
 	dma_async_device_register(&atdma->dma_common);
 
+	/*
+	 * Do not return an error if the dmac node is not present in order to
+	 * not break the existing way of requesting channel with
+	 * dma_request_channel().
+	 */
+	if (pdev->dev.of_node) {
+		err = of_dma_controller_register(pdev->dev.of_node,
+						 at_dma_xlate, atdma);
+		if (err) {
+			dev_err(&pdev->dev, "could not register of_dma_controller\n");
+			goto err_of_dma_controller_register;
+		}
+	}
+
 	return 0;
 
+err_of_dma_controller_register:
+	dma_async_device_unregister(&atdma->dma_common);
+	dma_pool_destroy(atdma->dma_desc_pool);
 err_pool_create:
 	platform_set_drvdata(pdev, NULL);
 	free_irq(platform_get_irq(pdev, 0), atdma);
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 0eb3c13..c604d26 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -220,6 +220,8 @@ enum atc_status {
  * @device: parent device
  * @ch_regs: memory mapped register base
  * @mask: channel index in a mask
+ * @per_if: peripheral interface
+ * @mem_if: memory interface
  * @status: transmit status information from irq/prep* functions
  *                to tasklet (use atomic operations)
  * @tasklet: bottom half to finish transaction work
@@ -238,6 +240,8 @@ struct at_dma_chan {
 	struct at_dma		*device;
 	void __iomem		*ch_regs;
 	u8			mask;
+	u8			per_if;
+	u8			mem_if;
 	unsigned long		status;
 	struct tasklet_struct	tasklet;
 	u32			save_cfg;
-- 
1.7.11.3

Re: [PATCH 1/3] at_hdmac: move to generic DMA binding

[Nicolas Ferre]

On 04/15/2013 02:16 PM, ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org :
> From: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> 
> Update at_hdmac driver to support generic DMA device tree binding. Devices
> can still request channel with dma_request_channel() then it doesn't break
> DMA for non DT boards.
> 
> Signed-off-by: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

Some minor comments but the overall is good: so, after adding a little
more explanation to documentation:

Acked-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

Very nice and concise patch for adding such an important feature: kudos!


> ---
>  .../devicetree/bindings/dma/atmel-dma.txt          | 26 +++++-
>  arch/arm/boot/dts/sama5d3.dtsi                     |  4 +-

Maybe we can have a separate patch for .dtsi modifications.

>  drivers/dma/at_hdmac.c                             | 93 ++++++++++++++++++++--
>  drivers/dma/at_hdmac_regs.h                        |  4 +
>  4 files changed, 117 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
> index 3c046ee..4179bd2 100644
> --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
> @@ -4,11 +4,33 @@ Required properties:
>  - compatible: Should be "atmel,<chip>-dma"
>  - reg: Should contain DMA registers location and length
>  - interrupts: Should contain DMA interrupt
> +- #dma-cells: Must be <2>

Maybe add some explanation (taken from pl330): "used to represent the
number of integer cells in the dmas property of client device."



> -Examples:
> +Example:
>  
> -dma@ffffec00 {
> +dma0: dma@ffffec00 {
>  	compatible = "atmel,at91sam9g45-dma";
>  	reg = <0xffffec00 0x200>;
>  	interrupts = <21>;
> +	#dma-cells = <2>;
> +};
> +
> +DMA clients connected to the Atmel DMA controller must use the format
> +described in the dma.txt file, using a three-cell specifier for each channel

(to establish the link with the #dma-cells property:)
"
using a three-cell specifier for each channel: a phandle plus two
integer cells.
"

> +The three cells in order are:
> +
> +1. A phandle pointing to the DMA controller
> +2. The memory interface (16 most significant bits), the peripheral interface
> +(16 less significant bits)
> +3. The peripheral identifier (can be different for tx and rx)

Yes but the peripheral identifier needs more explanation: what about:
"
Peripheral identifier for the hardware handshaking interface. The
identifier can be different for tx and rx.
"

> +
> +Example:
> +
> +i2c0@i2c@f8010000 {
> +	compatible = "atmel,at91sam9x5-i2c";
> +	reg = <0xf8010000 0x100>;
> +	interrupts = <9 4 6>;
> +	dmas = <&dma0 1 7>,
> +	       <&dma0 1 8>;
> +	dma-names = "tx", "rx"
>  };
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index 39b0458..95c00a3 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi

Ditto.

> @@ -348,14 +348,14 @@
>  				compatible = "atmel,at91sam9g45-dma";
>  				reg = <0xffffe600 0x200>;
>  				interrupts = <30 4 0>;
> -				#dma-cells = <1>;
> +				#dma-cells = <2>;
>  			};
>  
>  			dma1: dma-controller@ffffe800 {
>  				compatible = "atmel,at91sam9g45-dma";
>  				reg = <0xffffe800 0x200>;
>  				interrupts = <31 4 0>;
> -				#dma-cells = <1>;
> +				#dma-cells = <2>;
>  			};
>  
>  			ramc0: ramc@ffffea00 {
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index 8415467..d5f7a1b 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -24,6 +24,7 @@
>  #include <linux/slab.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/of_dma.h>
>  
>  #include "at_hdmac_regs.h"
>  #include "dmaengine.h"
> @@ -676,7 +677,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
>  		ctrlb |=  ATC_DST_ADDR_MODE_FIXED
>  			| ATC_SRC_ADDR_MODE_INCR
>  			| ATC_FC_MEM2PER
> -			| ATC_SIF(AT_DMA_MEM_IF) | ATC_DIF(AT_DMA_PER_IF);
> +			| ATC_SIF(atchan->mem_if) | ATC_DIF(atchan->per_if);
>  		reg = sconfig->dst_addr;
>  		for_each_sg(sgl, sg, sg_len, i) {
>  			struct at_desc	*desc;
> @@ -715,7 +716,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
>  		ctrlb |=  ATC_DST_ADDR_MODE_INCR
>  			| ATC_SRC_ADDR_MODE_FIXED
>  			| ATC_FC_PER2MEM
> -			| ATC_SIF(AT_DMA_PER_IF) | ATC_DIF(AT_DMA_MEM_IF);
> +			| ATC_SIF(atchan->per_if) | ATC_DIF(atchan->mem_if);
>  
>  		reg = sconfig->src_addr;
>  		for_each_sg(sgl, sg, sg_len, i) {
> @@ -821,8 +822,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
>  		desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED
>  				| ATC_SRC_ADDR_MODE_INCR
>  				| ATC_FC_MEM2PER
> -				| ATC_SIF(AT_DMA_MEM_IF)
> -				| ATC_DIF(AT_DMA_PER_IF);
> +				| ATC_SIF(atchan->mem_if)
> +				| ATC_DIF(atchan->per_if);
>  		break;
>  
>  	case DMA_DEV_TO_MEM:
> @@ -832,8 +833,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
>  		desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR
>  				| ATC_SRC_ADDR_MODE_FIXED
>  				| ATC_FC_PER2MEM
> -				| ATC_SIF(AT_DMA_PER_IF)
> -				| ATC_DIF(AT_DMA_MEM_IF);
> +				| ATC_SIF(atchan->per_if)
> +				| ATC_DIF(atchan->mem_if);
>  		break;
>  
>  	default:
> @@ -1189,6 +1190,67 @@ static void atc_free_chan_resources(struct dma_chan *chan)
>  	dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
>  }
>  
> +static bool at_dma_filter(struct dma_chan *chan, void *slave)
> +{
> +	struct at_dma_slave *atslave = slave;
> +
> +	if (atslave->dma_dev == chan->device->dev) {
> +		chan->private = atslave;
> +		return true;
> +	} else {
> +		return false;
> +	}
> +}
> +
> +#ifdef CONFIG_OF
> +static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
> +				     struct of_dma *of_dma)
> +{
> +	struct dma_chan *chan;
> +	struct at_dma_chan *atchan;
> +	struct at_dma_slave *atslave;
> +	dma_cap_mask_t mask;
> +	unsigned int per_id;
> +	struct platform_device *dmac_pdev;
> +
> +	if (dma_spec->args_count != 2)
> +		return NULL;
> +
> +	dmac_pdev = of_find_device_by_node(dma_spec->np);
> +
> +	dma_cap_zero(mask);
> +	dma_cap_set(DMA_SLAVE, mask);
> +
> +	atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL);
> +	if (!atslave)
> +		return NULL;
> +	/*
> +	 * We can fill both SRC_PER and DST_PER, one of these fields will be
> +	 * ignored depending on DMA transfer direction.
> +	 */
> +	per_id = dma_spec->args[1];
> +	atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_DST_H2SEL_HW
> +		      | ATC_SRC_H2SEL_HW | ATC_DST_PER(per_id)
> +		      | ATC_SRC_PER(per_id);
> +	atslave->dma_dev = &dmac_pdev->dev;
> +
> +	chan = dma_request_channel(mask, at_dma_filter, atslave);
> +	if (!chan)
> +		return NULL;
> +
> +	atchan = to_at_dma_chan(chan);
> +	atchan->per_if = dma_spec->args[0] & 0xff;
> +	atchan->mem_if = (dma_spec->args[0] >> 16) & 0xff;
> +
> +	return chan;
> +}
> +#else
> +static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
> +				     struct of_dma *of_dma)
> +{
> +	return NULL;
> +}
> +#endif
>  
>  /*--  Module Management  -----------------------------------------------*/
>  
> @@ -1343,6 +1405,8 @@ static int __init at_dma_probe(struct platform_device *pdev)
>  	for (i = 0; i < plat_dat->nr_channels; i++) {
>  		struct at_dma_chan	*atchan = &atdma->chan[i];
>  
> +		atchan->mem_if = AT_DMA_MEM_IF;
> +		atchan->per_if = AT_DMA_PER_IF;
>  		atchan->chan_common.device = &atdma->dma_common;
>  		dma_cookie_init(&atchan->chan_common);
>  		list_add_tail(&atchan->chan_common.device_node,
> @@ -1389,8 +1453,25 @@ static int __init at_dma_probe(struct platform_device *pdev)
>  
>  	dma_async_device_register(&atdma->dma_common);
>  
> +	/*
> +	 * Do not return an error if the dmac node is not present in order to
> +	 * not break the existing way of requesting channel with
> +	 * dma_request_channel().
> +	 */
> +	if (pdev->dev.of_node) {
> +		err = of_dma_controller_register(pdev->dev.of_node,
> +						 at_dma_xlate, atdma);
> +		if (err) {
> +			dev_err(&pdev->dev, "could not register of_dma_controller\n");
> +			goto err_of_dma_controller_register;
> +		}
> +	}
> +
>  	return 0;
>  
> +err_of_dma_controller_register:
> +	dma_async_device_unregister(&atdma->dma_common);
> +	dma_pool_destroy(atdma->dma_desc_pool);
>  err_pool_create:
>  	platform_set_drvdata(pdev, NULL);
>  	free_irq(platform_get_irq(pdev, 0), atdma);
> diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
> index 0eb3c13..c604d26 100644
> --- a/drivers/dma/at_hdmac_regs.h
> +++ b/drivers/dma/at_hdmac_regs.h
> @@ -220,6 +220,8 @@ enum atc_status {
>   * @device: parent device
>   * @ch_regs: memory mapped register base
>   * @mask: channel index in a mask
> + * @per_if: peripheral interface
> + * @mem_if: memory interface
>   * @status: transmit status information from irq/prep* functions
>   *                to tasklet (use atomic operations)
>   * @tasklet: bottom half to finish transaction work
> @@ -238,6 +240,8 @@ struct at_dma_chan {
>  	struct at_dma		*device;
>  	void __iomem		*ch_regs;
>  	u8			mask;
> +	u8			per_if;
> +	u8			mem_if;
>  	unsigned long		status;
>  	struct tasklet_struct	tasklet;
>  	u32			save_cfg;
> 


-- 
Nicolas Ferre

[PATCH 2/3] i2c: at91: convert to dma_request_slave_channel_compat()

[ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w]

From: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

Use generic DMA DT helper. Platforms booting with or without DT populated are
both supported.

Signed-off-by: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
---
 drivers/i2c/busses/i2c-at91.c | 49 ++++++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 75195e3..7ffd544 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -607,11 +607,16 @@ MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
 #define atmel_twi_dt_ids NULL
 #endif
 
-static bool filter(struct dma_chan *chan, void *slave)
+static bool filter(struct dma_chan *chan, void *pdata)
 {
-	struct at_dma_slave *sl = slave;
+	struct at91_twi_pdata *sl_pdata = pdata;
+	struct at_dma_slave *sl;
 
-	if (sl->dma_dev == chan->device->dev) {
+	if (!sl_pdata)
+		return false;
+
+	sl = &sl_pdata->dma_slave;
+	if (sl && (sl->dma_dev == chan->device->dev)) {
 		chan->private = sl;
 		return true;
 	} else {
@@ -622,11 +627,10 @@ static bool filter(struct dma_chan *chan, void *slave)
 static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
 {
 	int ret = 0;
-	struct at_dma_slave *sdata;
+	struct at91_twi_pdata *pdata = dev->pdata;
 	struct dma_slave_config slave_config;
 	struct at91_twi_dma *dma = &dev->dma;
-
-	sdata = &dev->pdata->dma_slave;
+	dma_cap_mask_t mask;
 
 	memset(&slave_config, 0, sizeof(slave_config));
 	slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
@@ -637,25 +641,22 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
 	slave_config.dst_maxburst = 1;
 	slave_config.device_fc = false;
 
-	if (sdata && sdata->dma_dev) {
-		dma_cap_mask_t mask;
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-		dma->chan_tx = dma_request_channel(mask, filter, sdata);
-		if (!dma->chan_tx) {
-			dev_err(dev->dev, "no DMA channel available for tx\n");
-			ret = -EBUSY;
-			goto error;
-		}
-		dma->chan_rx = dma_request_channel(mask, filter, sdata);
-		if (!dma->chan_rx) {
-			dev_err(dev->dev, "no DMA channel available for rx\n");
-			ret = -EBUSY;
-			goto error;
-		}
-	} else {
-		ret = -EINVAL;
+	dma->chan_tx = dma_request_slave_channel_compat(mask, filter, pdata,
+							dev->dev, "tx");
+	if (!dma->chan_tx) {
+		dev_err(dev->dev, "can't get a DMA channel for tx\n");
+		ret = -EBUSY;
+		goto error;
+	}
+
+	dma->chan_rx = dma_request_slave_channel_compat(mask, filter, pdata,
+							dev->dev, "rx");
+	if (!dma->chan_rx) {
+		dev_err(dev->dev, "can't get a DMA channel for rx\n");
+		ret = -EBUSY;
 		goto error;
 	}
 
-- 
1.7.11.3

Re: [PATCH 2/3] i2c: at91: convert to dma_request_slave_channel_compat()

[Wolfram Sang]

On Mon, Apr 15, 2013 at 02:16:56PM +0200, ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org wrote:
> From: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> 
> Use generic DMA DT helper. Platforms booting with or without DT populated are
> both supported.
> 
> Signed-off-by: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

Applied to for-next, thanks!

[PATCH 3/3] mci: at91: convert to dma_request_slave_channel_compat()

[ludovic.desroches]

From: Ludovic Desroches <ludovic.desroches@atmel.com>

Use generic DMA DT helper. Platforms booting with or without DT populated are
both supported.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
 drivers/mmc/host/atmel-mci.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 10f8b73..73d5d24 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -2224,10 +2224,15 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
 	mmc_free_host(slot->mmc);
 }
 
-static bool atmci_filter(struct dma_chan *chan, void *slave)
+static bool atmci_filter(struct dma_chan *chan, void *pdata)
 {
-	struct mci_dma_data	*sl = slave;
+	struct mci_platform_data *sl_pdata = pdata;
+	struct mci_dma_data *sl;
 
+	if (!sl_pdata)
+		return false;
+
+	sl = sl_pdata->dma_slave;
 	if (sl && find_slave_dev(sl) == chan->device->dev) {
 		chan->private = slave_data_ptr(sl);
 		return true;
@@ -2239,24 +2244,18 @@ static bool atmci_filter(struct dma_chan *chan, void *slave)
 static bool atmci_configure_dma(struct atmel_mci *host)
 {
 	struct mci_platform_data	*pdata;
+	dma_cap_mask_t mask;
 
 	if (host == NULL)
 		return false;
 
 	pdata = host->pdev->dev.platform_data;
 
-	if (!pdata)
-		return false;
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-	if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) {
-		dma_cap_mask_t mask;
-
-		/* Try to grab a DMA channel */
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-		host->dma.chan =
-			dma_request_channel(mask, atmci_filter, pdata->dma_slave);
-	}
+	host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
+						   	  &host->pdev->dev, "rxtx");
 	if (!host->dma.chan) {
 		dev_warn(&host->pdev->dev, "no DMA channel available\n");
 		return false;
-- 
1.7.11.3

Re: [PATCH 3/3] mci: at91: convert to dma_request_slave_channel_compat()

[Nicolas Ferre]

On 04/15/2013 02:16 PM, ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org :
> From: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> 
> Use generic DMA DT helper. Platforms booting with or without DT populated are
> both supported.
> 
> Signed-off-by: Ludovic Desroches <ludovic.desroches-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

Acked-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>

> ---
>  drivers/mmc/host/atmel-mci.c | 25 ++++++++++++-------------
>  1 file changed, 12 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index 10f8b73..73d5d24 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -2224,10 +2224,15 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
>  	mmc_free_host(slot->mmc);
>  }
>  
> -static bool atmci_filter(struct dma_chan *chan, void *slave)
> +static bool atmci_filter(struct dma_chan *chan, void *pdata)
>  {
> -	struct mci_dma_data	*sl = slave;
> +	struct mci_platform_data *sl_pdata = pdata;
> +	struct mci_dma_data *sl;
>  
> +	if (!sl_pdata)
> +		return false;
> +
> +	sl = sl_pdata->dma_slave;
>  	if (sl && find_slave_dev(sl) == chan->device->dev) {
>  		chan->private = slave_data_ptr(sl);
>  		return true;
> @@ -2239,24 +2244,18 @@ static bool atmci_filter(struct dma_chan *chan, void *slave)
>  static bool atmci_configure_dma(struct atmel_mci *host)
>  {
>  	struct mci_platform_data	*pdata;
> +	dma_cap_mask_t mask;
>  
>  	if (host == NULL)
>  		return false;
>  
>  	pdata = host->pdev->dev.platform_data;
>  
> -	if (!pdata)
> -		return false;
> +	dma_cap_zero(mask);
> +	dma_cap_set(DMA_SLAVE, mask);
>  
> -	if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) {
> -		dma_cap_mask_t mask;
> -
> -		/* Try to grab a DMA channel */
> -		dma_cap_zero(mask);
> -		dma_cap_set(DMA_SLAVE, mask);
> -		host->dma.chan =
> -			dma_request_channel(mask, atmci_filter, pdata->dma_slave);
> -	}
> +	host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
> +						   	  &host->pdev->dev, "rxtx");
>  	if (!host->dma.chan) {
>  		dev_warn(&host->pdev->dev, "no DMA channel available\n");
>  		return false;
> 


-- 
Nicolas Ferre

Re: [PATCH 0/3] ARM: at91: move to generic DMA device tree bindings

[Jean-Christophe PLAGNIOL-VILLARD]

On 14:16 Mon 15 Apr     , ludovic.desroches@atmel.com wrote:
> From: Ludovic Desroches <ludovic.desroches@atmel.com>
> 
> Hi,
> 
> This set of patches introduces DMA device tree bindings support for the atmel
> DMA controller and first driver conversions.
> 
> I'll send an update of dts file in the next version if there is no major issue
> with the bindings.
looks fine

Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Best Regards,
J.
> 
> Regards
> 
> 
> Ludovic Desroches (3):
>   at_hdmac: move to generic DMA binding
>   i2c: at91: convert to dma_request_slave_channel_compat()
>   mci: at91: convert to dma_request_slave_channel_compat()
> 
>  .../devicetree/bindings/dma/atmel-dma.txt          | 26 +++++-
>  arch/arm/boot/dts/sama5d3.dtsi                     |  4 +-
>  drivers/dma/at_hdmac.c                             | 93 ++++++++++++++++++++--
>  drivers/dma/at_hdmac_regs.h                        |  4 +
>  drivers/i2c/busses/i2c-at91.c                      | 49 ++++++------
>  drivers/mmc/host/atmel-mci.c                       | 25 +++---
>  6 files changed, 154 insertions(+), 47 deletions(-)
> 
> -- 
> 1.7.11.3
>