[PATCH 1/2] i2c: Add message transfer tracepoints for I2C [ver #2]

[PATCH 1/2] i2c: Add message transfer tracepoints for I2C [ver #2]

[David Howells]

Add tracepoints into the I2C message transfer function to retrieve the message
sent or received.  The following config options must be turned on to make use
of the facility:

	CONFIG_FTRACE
	CONFIG_ENABLE_DEFAULT_TRACERS

The I2C tracepoint can be enabled thusly:

	echo 1 >/sys/kernel/debug/tracing/events/i2c/i2c_transfer/enable

and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
that look like:

	... i2c_write: i2c-5 #0 a=044 f=0000 l=2 [02-14]
	... i2c_read: i2c-5 #1 a=044 f=0001 l=4
	... i2c_reply: i2c-5 #1 a=044 f=0001 l=4 [33-00-00-00]
	... i2c_result: i2c-5 n=2 ret=2

formatted as:

	i2c-<adapter-nr>
	#<message-array-index>
	a=<addr>
	f=<flags>
	l=<datalen>
	n=<message-array-size>
	ret=<result>
	[<data>]

The operation is done between the i2c_write/i2c_read lines and the i2c_reply
and i2c_result lines so that if the hardware hangs, the trace buffer can be
consulted to determine the problematic operation.

The adapters to be traced can be selected by something like:

	echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter

These changes are based on code from Steven Rostedt.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
---

 drivers/i2c/i2c-core.c     |   37 +++++++++++
 include/trace/events/i2c.h |  150 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 187 insertions(+)
 create mode 100644 include/trace/events/i2c.h

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index d74c0b34248e..c8b97490461d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -48,10 +48,13 @@
 #include <linux/rwsem.h>
 #include <linux/pm_runtime.h>
 #include <linux/acpi.h>
+#include <linux/jump_label.h>
 #include <asm/uaccess.h>
 
 #include "i2c-core.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/i2c.h>
 
 /* core_lock protects i2c_adapter_idr, and guarantees
    that device detection, deletion of detected devices, and attach_adapter
@@ -62,6 +65,18 @@ static DEFINE_IDR(i2c_adapter_idr);
 static struct device_type i2c_client_type;
 static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
 
+static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE;
+
+void i2c_transfer_trace_reg(void)
+{
+	static_key_slow_inc(&i2c_trace_msg);
+}
+
+void i2c_transfer_trace_unreg(void)
+{
+	static_key_slow_dec(&i2c_trace_msg);
+}
+
 /* ------------------------------------------------------------------------- */
 
 static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
@@ -1680,6 +1695,7 @@ static void __exit i2c_exit(void)
 	class_compat_unregister(i2c_adapter_compat_class);
 #endif
 	bus_unregister(&i2c_bus_type);
+	tracepoint_synchronize_unregister();
 }
 
 /* We must initialize early, because some subsystems register i2c drivers
@@ -1710,6 +1726,19 @@ int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	unsigned long orig_jiffies;
 	int ret, try;
 
+	/* i2c_trace_msg gets enabled when tracepoint i2c_transfer gets
+	 * enabled.  This is an efficient way of keeping the for-loop from
+	 * being executed when not needed.
+	 */
+	if (static_key_false(&i2c_trace_msg)) {
+		int i;
+		for (i = 0; i < num; i++)
+			if (msgs[i].flags & I2C_M_RD)
+				trace_i2c_read(adap, &msgs[i], i);
+			else
+				trace_i2c_write(adap, &msgs[i], i);
+	}
+
 	/* Retry automatically on arbitration loss */
 	orig_jiffies = jiffies;
 	for (ret = 0, try = 0; try <= adap->retries; try++) {
@@ -1720,6 +1749,14 @@ int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			break;
 	}
 
+	if (static_key_false(&i2c_trace_msg)) {
+		int i;
+		for (i = 0; i < ret; i++)
+			if (msgs[i].flags & I2C_M_RD)
+				trace_i2c_reply(adap, &msgs[i], i);
+		trace_i2c_result(adap, i, ret);
+	}
+
 	return ret;
 }
 EXPORT_SYMBOL(__i2c_transfer);
diff --git a/include/trace/events/i2c.h b/include/trace/events/i2c.h
new file mode 100644
index 000000000000..4800207269a2
--- /dev/null
+++ b/include/trace/events/i2c.h
@@ -0,0 +1,150 @@
+/* I2C message transfer tracepoints
+ *
+ * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM i2c
+
+#if !defined(_TRACE_I2C_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_I2C_H
+
+#include <linux/i2c.h>
+#include <linux/tracepoint.h>
+
+/*
+ * drivers/i2c/i2c-core.c
+ */
+extern void i2c_transfer_trace_reg(void);
+extern void i2c_transfer_trace_unreg(void);
+
+/*
+ * __i2c_transfer() write request
+ */
+TRACE_EVENT_FN(i2c_write,
+	       TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+			int num),
+	       TP_ARGS(adap, msg, num),
+	       TP_STRUCT__entry(
+		       __field(int,	adapter_nr		)
+		       __field(__u16,	msg_nr			)
+		       __field(__u16,	addr			)
+		       __field(__u16,	flags			)
+		       __field(__u16,	len			)
+		       __dynamic_array(__u8, buf, msg->len)	),
+	       TP_fast_assign(
+		       __entry->adapter_nr = adap->nr;
+		       __entry->msg_nr = num;
+		       __entry->addr = msg->addr;
+		       __entry->flags = msg->flags;
+		       __entry->len = msg->len;
+		       memcpy(__get_dynamic_array(buf), msg->buf, msg->len);
+			      ),
+	       TP_printk("i2c-%d #%u a=%03x f=%04x l=%u [%*phD]",
+			 __entry->adapter_nr,
+			 __entry->msg_nr,
+			 __entry->addr,
+			 __entry->flags,
+			 __entry->len,
+			 __entry->len, __get_dynamic_array(buf)
+			 ),
+	       i2c_transfer_trace_reg,
+	       i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() read request
+ */
+TRACE_EVENT_FN(i2c_read,
+	       TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+			int num),
+	       TP_ARGS(adap, msg, num),
+	       TP_STRUCT__entry(
+		       __field(int,	adapter_nr		)
+		       __field(__u16,	msg_nr			)
+		       __field(__u16,	addr			)
+		       __field(__u16,	flags			)
+		       __field(__u16,	len			)
+				),
+	       TP_fast_assign(
+		       __entry->adapter_nr = adap->nr;
+		       __entry->msg_nr = num;
+		       __entry->addr = msg->addr;
+		       __entry->flags = msg->flags;
+		       __entry->len = msg->len;
+			      ),
+	       TP_printk("i2c-%d #%u a=%03x f=%04x l=%u",
+			 __entry->adapter_nr,
+			 __entry->msg_nr,
+			 __entry->addr,
+			 __entry->flags,
+			 __entry->len
+			 ),
+	       i2c_transfer_trace_reg,
+		       i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() read reply
+ */
+TRACE_EVENT_FN(i2c_reply,
+	       TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+			int num),
+	       TP_ARGS(adap, msg, num),
+	       TP_STRUCT__entry(
+		       __field(int,	adapter_nr		)
+		       __field(__u16,	msg_nr			)
+		       __field(__u16,	addr			)
+		       __field(__u16,	flags			)
+		       __field(__u16,	len			)
+		       __dynamic_array(__u8, buf, msg->len)	),
+	       TP_fast_assign(
+		       __entry->adapter_nr = adap->nr;
+		       __entry->msg_nr = num;
+		       __entry->addr = msg->addr;
+		       __entry->flags = msg->flags;
+		       __entry->len = msg->len;
+		       memcpy(__get_dynamic_array(buf), msg->buf, msg->len);
+			      ),
+	       TP_printk("i2c-%d #%u a=%03x f=%04x l=%u [%*phD]",
+			 __entry->adapter_nr,
+			 __entry->msg_nr,
+			 __entry->addr,
+			 __entry->flags,
+			 __entry->len,
+			 __entry->len, __get_dynamic_array(buf)
+			 ),
+	       i2c_transfer_trace_reg,
+	       i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() result
+ */
+TRACE_EVENT_FN(i2c_result,
+	       TP_PROTO(const struct i2c_adapter *adap, int num, int ret),
+	       TP_ARGS(adap, num, ret),
+	       TP_STRUCT__entry(
+		       __field(int,	adapter_nr		)
+		       __field(__u16,	nr_msgs			)
+		       __field(__s16,	ret			)
+				),
+	       TP_fast_assign(
+		       __entry->adapter_nr = adap->nr;
+		       __entry->nr_msgs = num;
+		       __entry->ret = ret;
+			      ),
+	       TP_printk("i2c-%d n=%u ret=%d",
+			 __entry->adapter_nr,
+			 __entry->nr_msgs,
+			 __entry->ret
+			 ),
+	       i2c_transfer_trace_reg,
+	       i2c_transfer_trace_unreg);
+
+#endif /* _TRACE_I2C_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>

[PATCH 2/2] i2c: Add message transfer tracepoints for SMBUS [ver #2]

[David Howells]

The SMBUS tracepoints can be enabled thusly:

	echo 1 >/sys/kernel/debug/tracing/events/i2c/enable

and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
that look like:

         ... smbus_read: i2c-0 a=051 f=0000 c=fa BYTE_DATA
         ... smbus_reply: i2c-0 a=051 f=0000 c=fa BYTE_DATA l=1 [39]
         ... smbus_result: i2c-0 a=051 f=0000 c=fa BYTE_DATA rd res=0

formatted as:

	i2c-<adapter-nr>
	a=<addr>
	f=<flags>
	c=<command>
	<protocol-name>
	<rd|wr>
	res=<result>
	l=<data-len>
	[<data-block>]


The adapters to be traced can be selected by something like:

	echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter

Note that this shares the same filter and enablement as i2c.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
---

 drivers/i2c/i2c-core.c     |   23 ++++-
 include/trace/events/i2c.h |  224 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 243 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index c8b97490461d..619910632d26 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -2552,6 +2552,14 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 	int try;
 	s32 res;
 
+	/* If enabled, the following two tracepoints are conditional on
+	 * read_write and protocol.
+	 */
+	trace_smbus_write(adapter, addr, flags, read_write,
+			  command, protocol, data);
+	trace_smbus_read(adapter, addr, flags, read_write,
+			 command, protocol);
+
 	flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
 
 	if (adapter->algo->smbus_xfer) {
@@ -2572,15 +2580,24 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
 		i2c_unlock_adapter(adapter);
 
 		if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
-			return res;
+			goto trace;
 		/*
 		 * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
 		 * implement native support for the SMBus operation.
 		 */
 	}
 
-	return i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
-				       command, protocol, data);
+	res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
+				      command, protocol, data);
+
+trace:
+	/* If enabled, the reply tracepoint is conditional on read_write. */
+	trace_smbus_reply(adapter, addr, flags, read_write,
+			  command, protocol, data);
+	trace_smbus_result(adapter, addr, flags, read_write,
+			   command, protocol, res);
+
+	return res;
 }
 EXPORT_SYMBOL(i2c_smbus_xfer);
 
diff --git a/include/trace/events/i2c.h b/include/trace/events/i2c.h
index 4800207269a2..fe17187df65d 100644
--- a/include/trace/events/i2c.h
+++ b/include/trace/events/i2c.h
@@ -1,4 +1,4 @@
-/* I2C message transfer tracepoints
+/* I2C and SMBUS message transfer tracepoints
  *
  * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
@@ -144,6 +144,228 @@ TRACE_EVENT_FN(i2c_result,
 	       i2c_transfer_trace_reg,
 	       i2c_transfer_trace_unreg);
 
+/*
+ * i2c_smbus_xfer() write data or procedure call request
+ */
+TRACE_EVENT_CONDITION(smbus_write,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol,
+		 const union i2c_smbus_data *data),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+	TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
+		     protocol == I2C_SMBUS_PROC_CALL ||
+		     protocol == I2C_SMBUS_BLOCK_PROC_CALL),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	addr			)
+		__field(__u16,	flags			)
+		__field(__u8,	command			)
+		__field(__u8,	len			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+
+		switch (protocol) {
+		case I2C_SMBUS_BYTE_DATA:
+			__entry->len = 1;
+			goto copy;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			__entry->len = 2;
+			goto copy;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			__entry->len = data->block[0] + 1;
+		copy:
+			memcpy(__entry->buf, data->block, __entry->len);
+			break;
+		case I2C_SMBUS_QUICK:
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_I2C_BLOCK_BROKEN:
+		default:
+			__entry->len = 0;
+		}
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		  __entry->len,
+		  __entry->len, __entry->buf
+		  ));
+
+/*
+ * i2c_smbus_xfer() read data request
+ */
+TRACE_EVENT_CONDITION(smbus_read,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol),
+	TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
+		       protocol == I2C_SMBUS_PROC_CALL ||
+		       protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	flags			)
+		__field(__u16,	addr			)
+		__field(__u8,	command			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" })
+		  ));
+
+/*
+ * i2c_smbus_xfer() read data or procedure call reply
+ */
+TRACE_EVENT_CONDITION(smbus_reply,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol,
+		 const union i2c_smbus_data *data),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+	TP_CONDITION(read_write == I2C_SMBUS_READ),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	addr			)
+		__field(__u16,	flags			)
+		__field(__u8,	command			)
+		__field(__u8,	len			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+
+		switch (protocol) {
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			__entry->len = 1;
+			goto copy;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			__entry->len = 2;
+			goto copy;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			__entry->len = data->block[0] + 1;
+		copy:
+			memcpy(__entry->buf, data->block, __entry->len);
+			break;
+		case I2C_SMBUS_QUICK:
+		case I2C_SMBUS_I2C_BLOCK_BROKEN:
+		default:
+			__entry->len = 0;
+		}
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		  __entry->len,
+		  __entry->len, __entry->buf
+		  ));
+
+/*
+ * i2c_smbus_xfer() result
+ */
+TRACE_EVENT(smbus_result,
+	    TP_PROTO(const struct i2c_adapter *adap,
+		     u16 addr, unsigned short flags,
+		     char read_write, u8 command, int protocol,
+		     int res),
+	    TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
+	    TP_STRUCT__entry(
+		    __field(int,	adapter_nr		)
+		    __field(__u16,	addr			)
+		    __field(__u16,	flags			)
+		    __field(__u8,	read_write		)
+		    __field(__u8,	command			)
+		    __field(__s16,	res			)
+		    __field(__u32,	protocol		)
+			     ),
+	    TP_fast_assign(
+		    __entry->adapter_nr = adap->nr;
+		    __entry->addr = addr;
+		    __entry->flags = flags;
+		    __entry->read_write = read_write;
+		    __entry->command = command;
+		    __entry->protocol = protocol;
+		    __entry->res = res;
+			   ),
+	    TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
+		      __entry->adapter_nr,
+		      __entry->addr,
+		      __entry->flags,
+		      __entry->command,
+		      __print_symbolic(__entry->protocol,
+				       { I2C_SMBUS_QUICK,		"QUICK"	},
+				       { I2C_SMBUS_BYTE,		"BYTE"	},
+				       { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				       { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				       { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				       { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				       { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				       { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				       { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		      __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
+		      __entry->res
+		      ));
+
 #endif /* _TRACE_I2C_H */
 
 /* This part must be outside protection */

Re: [PATCH 2/2] i2c: Add message transfer tracepoints for SMBUS [ver #2]

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1074 bytes --]

On Thu, Mar 06, 2014 at 01:36:06PM +0000, David Howells wrote:
> The SMBUS tracepoints can be enabled thusly:
> 
> 	echo 1 >/sys/kernel/debug/tracing/events/i2c/enable
> 
> and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
> that look like:
> 
>          ... smbus_read: i2c-0 a=051 f=0000 c=fa BYTE_DATA
>          ... smbus_reply: i2c-0 a=051 f=0000 c=fa BYTE_DATA l=1 [39]
>          ... smbus_result: i2c-0 a=051 f=0000 c=fa BYTE_DATA rd res=0
> 
> formatted as:
> 
> 	i2c-<adapter-nr>
> 	a=<addr>
> 	f=<flags>
> 	c=<command>
> 	<protocol-name>
> 	<rd|wr>
> 	res=<result>
> 	l=<data-len>
> 	[<data-block>]
> 
> 
> The adapters to be traced can be selected by something like:
> 
> 	echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter
> 
> Note that this shares the same filter and enablement as i2c.
> 
> Signed-off-by: David Howells <dhowells-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Reviewed-by: Steven Rostedt <rostedt-nx8X9YLhiw1AfugRpC6u6w@public.gmane.org>

Applied to for-next, thanks!


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 1/2] i2c: Add message transfer tracepoints for I2C [ver #2]

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1598 bytes --]

On Thu, Mar 06, 2014 at 01:35:59PM +0000, David Howells wrote:
> Add tracepoints into the I2C message transfer function to retrieve the message
> sent or received.  The following config options must be turned on to make use
> of the facility:
> 
> 	CONFIG_FTRACE
> 	CONFIG_ENABLE_DEFAULT_TRACERS
> 
> The I2C tracepoint can be enabled thusly:
> 
> 	echo 1 >/sys/kernel/debug/tracing/events/i2c/i2c_transfer/enable
> 
> and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
> that look like:
> 
> 	... i2c_write: i2c-5 #0 a=044 f=0000 l=2 [02-14]
> 	... i2c_read: i2c-5 #1 a=044 f=0001 l=4
> 	... i2c_reply: i2c-5 #1 a=044 f=0001 l=4 [33-00-00-00]
> 	... i2c_result: i2c-5 n=2 ret=2
> 
> formatted as:
> 
> 	i2c-<adapter-nr>
> 	#<message-array-index>
> 	a=<addr>
> 	f=<flags>
> 	l=<datalen>
> 	n=<message-array-size>
> 	ret=<result>
> 	[<data>]
> 
> The operation is done between the i2c_write/i2c_read lines and the i2c_reply
> and i2c_result lines so that if the hardware hangs, the trace buffer can be
> consulted to determine the problematic operation.
> 
> The adapters to be traced can be selected by something like:
> 
> 	echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter
> 
> These changes are based on code from Steven Rostedt.
> 
> Signed-off-by: Steven Rostedt <rostedt-nx8X9YLhiw1AfugRpC6u6w@public.gmane.org>
> Signed-off-by: David Howells <dhowells-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Reviewed-by: Steven Rostedt <rostedt-nx8X9YLhiw1AfugRpC6u6w@public.gmane.org>

Applied to for-next, thanks!


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]