[PATCH] i2c-gpio: OF gpio code does not handle defered probe case

[PATCH] i2c-gpio: OF gpio code does not handle defered probe case

[Ben Dooks]

When using device-tree and the i2c-gpio driver is called before the
GPIO node has been probed then it needs to correctly defer the probe
instead of returning a permanent error that the gpio numbers are not
valid.

This fixes the following error:
	/i2c@2: invalid GPIO pins, sda=-517/scl=-517

Signed-off-by: Ben Dooks <ben.dooks-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
---
 drivers/i2c/busses/i2c-gpio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index d9f7e18..02d2d4a 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -94,6 +94,9 @@ static int of_i2c_gpio_get_pins(struct device_node *np,
 	*sda_pin = of_get_gpio(np, 0);
 	*scl_pin = of_get_gpio(np, 1);
 
+	if (*sda_pin == -EPROBE_DEFER || *scl_pin == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
 	if (!gpio_is_valid(*sda_pin) || !gpio_is_valid(*scl_pin)) {
 		pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n",
 		       np->full_name, *sda_pin, *scl_pin);
-- 
1.9.0

Re: [PATCH] i2c-gpio: OF gpio code does not handle defered probe case

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

On Thu, Mar 13, 2014 at 02:37:38PM +0000, Ben Dooks wrote:
> When using device-tree and the i2c-gpio driver is called before the
> GPIO node has been probed then it needs to correctly defer the probe
> instead of returning a permanent error that the gpio numbers are not
> valid.
> 
> This fixes the following error:
> 	/i2c@2: invalid GPIO pins, sda=-517/scl=-517
> 
> Signed-off-by: Ben Dooks <ben.dooks-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>

Applied to for-next, thanks!


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]