From: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>
To: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
Cc: Linux I2C <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH] i2c-eg20t: Fix Kconfig dependencies
Date: Tue, 6 May 2014 10:05:21 +0200 [thread overview]
Message-ID: <20140506100521.03861792@endymion.delvare> (raw)
From: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>
Subject: i2c-eg20t: Fix Kconfig dependencies
The i2c-eg20t driver is for a companion chip to the Intel Atom E600
series processors. These are 32-bit x86 processors so the driver is
only needed on X86_32. Add COMPILE_TEST as an alternative, so that the
driver can still be build-tested elsewhere.
Signed-off-by: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>
Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-3.15-rc4.orig/drivers/i2c/busses/Kconfig 2014-04-14 09:42:29.899075210 +0200
+++ linux-3.15-rc4/drivers/i2c/busses/Kconfig 2014-05-06 09:59:00.175785765 +0200
@@ -449,7 +449,7 @@ config I2C_EFM32
config I2C_EG20T
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This driver is for PCH(Platform controller Hub) I2C of EG20T which
is an IOH(Input/Output Hub) for x86 embedded processor.
--
Jean Delvare
SUSE L3 Support
next reply other threads:[~2014-05-06 8:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-06 8:05 Jean Delvare [this message]
[not found] ` <20140506100521.03861792-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2014-05-21 10:48 ` [PATCH] i2c-eg20t: Fix Kconfig dependencies Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140506100521.03861792@endymion.delvare \
--to=jdelvare-l3a5bk7wagm@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).