* [PATCH] i2c-eg20t: Fix Kconfig dependencies
@ 2014-05-06 8:05 Jean Delvare
[not found] ` <20140506100521.03861792-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Jean Delvare @ 2014-05-06 8:05 UTC (permalink / raw)
To: Wolfram Sang; +Cc: Linux I2C
From: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>
Subject: i2c-eg20t: Fix Kconfig dependencies
The i2c-eg20t driver is for a companion chip to the Intel Atom E600
series processors. These are 32-bit x86 processors so the driver is
only needed on X86_32. Add COMPILE_TEST as an alternative, so that the
driver can still be build-tested elsewhere.
Signed-off-by: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>
Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- linux-3.15-rc4.orig/drivers/i2c/busses/Kconfig 2014-04-14 09:42:29.899075210 +0200
+++ linux-3.15-rc4/drivers/i2c/busses/Kconfig 2014-05-06 09:59:00.175785765 +0200
@@ -449,7 +449,7 @@ config I2C_EFM32
config I2C_EG20T
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
help
This driver is for PCH(Platform controller Hub) I2C of EG20T which
is an IOH(Input/Output Hub) for x86 embedded processor.
--
Jean Delvare
SUSE L3 Support
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-05-21 10:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-06 8:05 [PATCH] i2c-eg20t: Fix Kconfig dependencies Jean Delvare
[not found] ` <20140506100521.03861792-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2014-05-21 10:48 ` Wolfram Sang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).