From: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>
To: Linux I2C <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: James Ralston
<james.d.ralston-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
Subject: [PATCH] i2c-i801: Fix the alignment of the device table
Date: Mon, 23 Jun 2014 10:36:58 +0200 [thread overview]
Message-ID: <20140623103658.57df2c14@endymion.delvare> (raw)
A long name broke the alignment, shift the columns a bit to fix it and
make the table look nice again. While we're here, switch to the
standard comment style to make checkpatch happy.
Signed-off-by: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>
Cc: James Ralston <james.d.ralston-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
---
drivers/i2c/busses/i2c-i801.c | 102 +++++++++++++++++++++---------------------
1 file changed, 51 insertions(+), 51 deletions(-)
--- linux-3.16-rc1.orig/drivers/i2c/busses/i2c-i801.c 2014-06-16 05:45:28.000000000 +0200
+++ linux-3.16-rc1/drivers/i2c/busses/i2c-i801.c 2014-06-23 10:33:04.341790691 +0200
@@ -22,57 +22,57 @@
*/
/*
- Supports the following Intel I/O Controller Hubs (ICH):
-
- I/O Block I2C
- region SMBus Block proc. block
- Chip name PCI ID size PEC buffer call read
- ----------------------------------------------------------------------
- 82801AA (ICH) 0x2413 16 no no no no
- 82801AB (ICH0) 0x2423 16 no no no no
- 82801BA (ICH2) 0x2443 16 no no no no
- 82801CA (ICH3) 0x2483 32 soft no no no
- 82801DB (ICH4) 0x24c3 32 hard yes no no
- 82801E (ICH5) 0x24d3 32 hard yes yes yes
- 6300ESB 0x25a4 32 hard yes yes yes
- 82801F (ICH6) 0x266a 32 hard yes yes yes
- 6310ESB/6320ESB 0x269b 32 hard yes yes yes
- 82801G (ICH7) 0x27da 32 hard yes yes yes
- 82801H (ICH8) 0x283e 32 hard yes yes yes
- 82801I (ICH9) 0x2930 32 hard yes yes yes
- EP80579 (Tolapai) 0x5032 32 hard yes yes yes
- ICH10 0x3a30 32 hard yes yes yes
- ICH10 0x3a60 32 hard yes yes yes
- 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
- 6 Series (PCH) 0x1c22 32 hard yes yes yes
- Patsburg (PCH) 0x1d22 32 hard yes yes yes
- Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
- Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
- Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
- DH89xxCC (PCH) 0x2330 32 hard yes yes yes
- Panther Point (PCH) 0x1e22 32 hard yes yes yes
- Lynx Point (PCH) 0x8c22 32 hard yes yes yes
- Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
- Avoton (SOC) 0x1f3c 32 hard yes yes yes
- Wellsburg (PCH) 0x8d22 32 hard yes yes yes
- Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
- Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
- Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
- Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
- Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
- BayTrail (SOC) 0x0f12 32 hard yes yes yes
-
- Features supported by this driver:
- Software PEC no
- Hardware PEC yes
- Block buffer yes
- Block process call transaction no
- I2C block read transaction yes (doesn't use the block buffer)
- Slave mode no
- Interrupt processing yes
-
- See the file Documentation/i2c/busses/i2c-i801 for details.
-*/
+ * Supports the following Intel I/O Controller Hubs (ICH):
+ *
+ * I/O Block I2C
+ * region SMBus Block proc. block
+ * Chip name PCI ID size PEC buffer call read
+ * -----------------------------------------------------------------------
+ * 82801AA (ICH) 0x2413 16 no no no no
+ * 82801AB (ICH0) 0x2423 16 no no no no
+ * 82801BA (ICH2) 0x2443 16 no no no no
+ * 82801CA (ICH3) 0x2483 32 soft no no no
+ * 82801DB (ICH4) 0x24c3 32 hard yes no no
+ * 82801E (ICH5) 0x24d3 32 hard yes yes yes
+ * 6300ESB 0x25a4 32 hard yes yes yes
+ * 82801F (ICH6) 0x266a 32 hard yes yes yes
+ * 6310ESB/6320ESB 0x269b 32 hard yes yes yes
+ * 82801G (ICH7) 0x27da 32 hard yes yes yes
+ * 82801H (ICH8) 0x283e 32 hard yes yes yes
+ * 82801I (ICH9) 0x2930 32 hard yes yes yes
+ * EP80579 (Tolapai) 0x5032 32 hard yes yes yes
+ * ICH10 0x3a30 32 hard yes yes yes
+ * ICH10 0x3a60 32 hard yes yes yes
+ * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
+ * 6 Series (PCH) 0x1c22 32 hard yes yes yes
+ * Patsburg (PCH) 0x1d22 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
+ * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
+ * DH89xxCC (PCH) 0x2330 32 hard yes yes yes
+ * Panther Point (PCH) 0x1e22 32 hard yes yes yes
+ * Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
+ * Avoton (SOC) 0x1f3c 32 hard yes yes yes
+ * Wellsburg (PCH) 0x8d22 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
+ * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
+ * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
+ * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
+ * BayTrail (SOC) 0x0f12 32 hard yes yes yes
+ *
+ * Features supported by this driver:
+ * Software PEC no
+ * Hardware PEC yes
+ * Block buffer yes
+ * Block process call transaction no
+ * I2C block read transaction yes (doesn't use the block buffer)
+ * Slave mode no
+ * Interrupt processing yes
+ *
+ * See the file Documentation/i2c/busses/i2c-i801 for details.
+ */
#include <linux/interrupt.h>
#include <linux/module.h>
--
Jean Delvare
SUSE L3 Support
next reply other threads:[~2014-06-23 8:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-23 8:36 Jean Delvare [this message]
[not found] ` <20140623103658.57df2c14-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2014-07-16 17:23 ` [PATCH] i2c-i801: Fix the alignment of the device table Wolfram Sang
2014-07-17 6:29 ` Jean Delvare
[not found] ` <20140717082930.0dcad551-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2014-07-17 8:41 ` Wolfram Sang
2014-07-17 10:00 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140623103658.57df2c14@endymion.delvare \
--to=jdelvare-l3a5bk7wagm@public.gmane.org \
--cc=james.d.ralston-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).