linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
To: Kuninori Morimoto
	<kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Cc: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
	Linux-SH <linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Linux-I2C <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH 1/5] i2c: rcar: add renesas,i2c-rcar-gen1/gen2 in DT compatible
Date: Thu, 7 Aug 2014 09:18:13 +0900	[thread overview]
Message-ID: <20140807001805.GE32652@verge.net.au> (raw)
In-Reply-To: <87r40uw7rp.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>

On Tue, Aug 05, 2014 at 09:40:12PM -0700, Kuninori Morimoto wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> 
> This patch adds DT compatible for Renesas R-Car Gen1/Gen2.
> Current driver has SoC level .compatible
> (r8a7778/r8a7779/r8a7790/r8a7791/r8a7792/r8a7793/r8a7794),
> but these can be match as generation level.

Hi Morimoto-san,

is this compatibility explicitly documented somewhere?

> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-rcar.txt |    4 +++-
>  drivers/i2c/busses/i2c-rcar.c                      |    2 ++
>  2 files changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> index 16b3e07..0f9e812 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> @@ -3,6 +3,8 @@ I2C for R-Car platforms
>  Required properties:
>  - compatible: Must be one of
>  	"renesas,i2c-rcar"
> +	"renesas,i2c-rcar-gen1"
> +	"renesas,i2c-rcar-gen2"
>  	"renesas,i2c-r8a7778"
>  	"renesas,i2c-r8a7779"
>  	"renesas,i2c-r8a7790"
> @@ -24,7 +26,7 @@ Examples :
>  i2c0: i2c@e6508000 {
>  	#address-cells = <1>;
>  	#size-cells = <0>;
> -	compatible = "renesas,i2c-r8a7791";
> +	compatible = "renesas,i2c-r8a7791", "renesas,i2c-rcar-gen2";
>  	reg = <0 0xe6508000 0 0x40>;
>  	interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
>  	clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
> diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
> index f3c7139..6f805f8 100644
> --- a/drivers/i2c/busses/i2c-rcar.c
> +++ b/drivers/i2c/busses/i2c-rcar.c
> @@ -487,6 +487,8 @@ static const struct i2c_algorithm rcar_i2c_algo = {
>  
>  static const struct of_device_id rcar_i2c_dt_ids[] = {
>  	{ .compatible = "renesas,i2c-rcar", .data = (void *)I2C_RCAR_GEN1 },
> +	{ .compatible = "renesas,i2c-rcar-gen1", .data = (void *)I2C_RCAR_GEN1 },
> +	{ .compatible = "renesas,i2c-rcar-gen2", .data = (void *)I2C_RCAR_GEN2 },
>  	{ .compatible = "renesas,i2c-r8a7778", .data = (void *)I2C_RCAR_GEN1 },
>  	{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
>  	{ .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 },
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

  parent reply	other threads:[~2014-08-07  0:18 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-06  4:39 [PATCH 0/5] i2c: rcar: add renesas,i2c-rcar-gen1/gen2 in DT compatible Kuninori Morimoto
     [not found] ` <87silaw7t2.wl%kuninori.morimoto.gx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-08-06  4:40   ` [PATCH 1/5] " Kuninori Morimoto
     [not found]     ` <87r40uw7rp.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2014-08-07  0:18       ` Simon Horman [this message]
2014-08-07  0:36         ` Kuninori Morimoto
     [not found]           ` <8761i5kuel.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2014-08-07  1:10             ` Simon Horman
     [not found]               ` <20140807011025.GA3284-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2014-08-07  2:43                 ` Kuninori Morimoto
2014-08-07  3:55                   ` Magnus Damm
     [not found]                     ` <CANqRtoSu2cZyY2YELUzPF86UAz+=TFtBYsnmotpNDEh9FEhp1Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-08-07  5:19                       ` Kuninori Morimoto
2014-08-07  5:58                         ` Magnus Damm
2014-08-07  8:34                           ` Kuninori Morimoto
2014-09-19 17:18                             ` Wolfram Sang
2014-09-22  2:04                               ` Simon Horman
2014-08-06  4:40   ` [PATCH 2/5] ARM: shmobile: r8a7778: add generation level compatible for i2c Kuninori Morimoto
2014-08-06 19:04   ` [PATCH 0/5] i2c: rcar: add renesas,i2c-rcar-gen1/gen2 in DT compatible Wolfram Sang
2014-08-06  4:40 ` [PATCH 3/5] ARM: shmobile: r8a7779: add generation level compatible for i2c Kuninori Morimoto
2014-08-06  4:40 ` [PATCH 4/5] ARM: shmobile: r8a7790: " Kuninori Morimoto
2014-08-06  4:40 ` [PATCH 5/5] ARM: shmobile: r8a7791: " Kuninori Morimoto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140807001805.GE32652@verge.net.au \
    --to=horms-/r6kz+ddxgppr4jqbcensq@public.gmane.org \
    --cc=kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).