From: Mika Westerberg <mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Lan Tianyu <tianyu.lan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org,
lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org,
robert.moore-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
lv.zheng-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
shigorin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
adamw-cfjF3rc+CpsYNetmKr+vY16hYfS7NtTn@public.gmane.org,
jan.brummer-sgYkR6nYkOfYtjvyW6yDsg@public.gmane.org,
linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devel-E0kO6a4B6psdnm+yROfE0A@public.gmane.org
Subject: Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
Date: Wed, 19 Nov 2014 18:26:51 +0200 [thread overview]
Message-ID: <20141119162651.GK1309@lahna.fi.intel.com> (raw)
In-Reply-To: <1416410441-14425-1-git-send-email-tianyu.lan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
On Wed, Nov 19, 2014 at 11:20:41PM +0800, Lan Tianyu wrote:
> ACPI 5.0 introduces _DEP to designate device objects that OSPM should
> assign a higher priority in start ordering due to future operation region
> accesses.
>
> On Asus T100TA, ACPI battery info are read from a I2C slave device via
> I2C operation region. Before I2C operation region handler is installed,
> battery _STA always returns 0. There is a _DEP method of designating
> start order under battery device node.
>
> This patch is to implement _DEP feature to fix battery issue on the Asus T100TA.
> Introducing acpi_dep_list and adding dep_unmet count in the struct
> acpi_device. During ACPI namespace scan, create struct acpi_dep_data for a
> valid pair of master (device pointed to by _DEP)/slave(device with _DEP), record
> master's and slave's ACPI handle in it and put it into acpi_dep_list. The dep_unmet
> count will increase by one if there is a device under its _DEP. Driver's probe() should
> return EPROBE_DEFER when find dep_unmet larger than 0. When I2C operation
> region handler is installed, remove all struct acpi_dep_data on the acpi_dep_list
> whose master is pointed to I2C host controller and decrease slave's dep_unmet.
> When dep_unmet decreases to 0, all _DEP conditions are met and then do acpi_bus_attach()
> for the device in order to resolve battery _STA issue on the Asus T100TA.
>
> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=69011
> Tested-by: Jan-Michael Brummer <jan.brummer-sgYkR6nYkOfYtjvyW6yDsg@public.gmane.org>
> Tested-by: Adam Williamson <adamw-cfjF3rc+CpsYNetmKr+vY16hYfS7NtTn@public.gmane.org>
> Tested-by: Michael Shigorin <shigorin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Lan Tianyu <tianyu.lan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> ---
> drivers/acpi/battery.c | 4 +++
> drivers/acpi/scan.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/i2c/i2c-core.c | 1 +
> include/acpi/acpi_bus.h | 1 +
> include/linux/acpi.h | 3 ++
> 5 files changed, 98 insertions(+)
>
> diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
> index 8ec8a89..d98ba43 100644
> --- a/drivers/acpi/battery.c
> +++ b/drivers/acpi/battery.c
> @@ -1180,6 +1180,10 @@ static int acpi_battery_add(struct acpi_device *device)
>
> if (!device)
> return -EINVAL;
> +
> + if (device->dep_unmet)
> + return -EPROBE_DEFER;
> +
> battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL);
> if (!battery)
> return -ENOMEM;
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 9cb5cca..0e58666 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -36,6 +36,8 @@ bool acpi_force_hot_remove;
>
> static const char *dummy_hid = "device";
>
> +static LIST_HEAD(acpi_dep_list);
> +static DEFINE_MUTEX(acpi_dep_list_lock);
> static LIST_HEAD(acpi_bus_id_list);
> static DEFINE_MUTEX(acpi_scan_lock);
> static LIST_HEAD(acpi_scan_handlers_list);
> @@ -43,6 +45,12 @@ DEFINE_MUTEX(acpi_device_lock);
> LIST_HEAD(acpi_wakeup_device_list);
> static DEFINE_MUTEX(acpi_hp_context_lock);
>
> +struct acpi_dep_data {
> + struct list_head node;
> + acpi_handle master;
> + acpi_handle slave;
> +};
> +
> struct acpi_device_bus_id{
> char bus_id[15];
> unsigned int instance_no;
> @@ -2193,6 +2201,61 @@ static void acpi_scan_init_hotplug(struct acpi_device *adev)
> }
> }
>
> +static void acpi_device_dep_initialize(struct acpi_device *adev)
> +{
> + struct acpi_dep_data *dep;
> + struct acpi_handle_list dep_devices;
> + struct acpi_device_info *info;
> + acpi_status status;
> + int i, skip;
> +
> + if (!acpi_has_method(adev->handle, "_DEP"))
> + return;
> +
> + status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
> + &dep_devices);
> + if (ACPI_FAILURE(status)) {
> + dev_err(&adev->dev, "Failed to evaluate _DEP.\n");
> + return;
> + }
> +
> + for (i = 0; i < dep_devices.count; i++) {
> +
Delete the black line.
> + status = acpi_get_object_info(dep_devices.handles[i], &info);
> + if (ACPI_FAILURE(status)) {
> + dev_err(&adev->dev, "Error reading device info\n");
> + continue;
> + }
> +
> + /*
> + * Skip the dependency of Windows System Power
> + * Management Controller
> + */
> + if (info->valid & ACPI_VALID_HID
> + && !strcmp(info->hardware_id.string, "INT3396"))
> + skip = 1;
> + else
> + skip = 0;
> +
> + kfree(info);
> +
> + if (skip)
> + continue;
> +
> + dep = kzalloc(sizeof(struct acpi_dep_data), GFP_KERNEL);
> + if (!dep)
> + return;
> +
> + dep->master = dep_devices.handles[i];
> + dep->slave = adev->handle;
> + adev->dep_unmet++;
> +
> + mutex_lock(&acpi_dep_list_lock);
> + list_add_tail(&dep->node , &acpi_dep_list);
> + mutex_unlock(&acpi_dep_list_lock);
> + }
> +}
> +
> static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
> void *not_used, void **return_value)
> {
> @@ -2219,6 +2282,7 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
> return AE_CTRL_DEPTH;
>
> acpi_scan_init_hotplug(device);
> + acpi_device_dep_initialize(device);
>
> out:
> if (!*return_value)
> @@ -2339,6 +2403,31 @@ static void acpi_bus_attach(struct acpi_device *device)
> device->handler->hotplug.notify_online(device);
> }
>
> +int acpi_walk_dep_device_list(acpi_handle handle)
> +{
> + struct acpi_dep_data *dep, *tmp;
> + struct acpi_device *adev;
> +
> + mutex_lock(&acpi_dep_list_lock);
> + list_for_each_entry_safe(dep, tmp, &acpi_dep_list, node) {
> + if (dep->master == handle) {
> + acpi_bus_get_device(dep->slave, &adev);
> + if (!adev)
> + continue;
> +
> + adev->dep_unmet--;
> + if (!adev->dep_unmet)
> + acpi_bus_attach(adev);
> + list_del(&dep->node);
> + kfree(dep);
> + }
> + }
> + mutex_unlock(&acpi_dep_list_lock);
> +
> + return 0;
Since you always return 0, why nyt make it void instead?
> +}
> +EXPORT_SYMBOL_GPL(acpi_walk_dep_device_list);
> +
> /**
> * acpi_bus_scan - Add ACPI device node objects in a given namespace scope.
> * @handle: Root of the namespace scope to scan.
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index f43b4e1..68aeb8e 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -403,6 +403,7 @@ static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
> return -ENOMEM;
> }
>
> + acpi_walk_dep_device_list(handle);
> return 0;
> }
>
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index 7d1ce40..d539084 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -372,6 +372,7 @@ struct acpi_device {
> void *driver_data;
> struct device dev;
> unsigned int physical_node_count;
> + unsigned int dep_unmet;
> struct list_head physical_node_list;
> struct mutex physical_node_lock;
> void (*remove)(struct acpi_device *);
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 10f2ed9..c60ea30 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -428,6 +428,7 @@ extern bool acpi_driver_match_device(struct device *dev,
> const struct device_driver *drv);
> int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *);
> int acpi_device_modalias(struct device *, char *, int);
> +int acpi_walk_dep_device_list(acpi_handle handle);
>
> struct platform_device *acpi_create_platform_device(struct acpi_device *);
> #define ACPI_PTR(_ptr) (_ptr)
> @@ -464,6 +465,8 @@ static inline const char *acpi_dev_name(struct acpi_device *adev)
>
> static inline void acpi_early_init(void) { }
>
> +static inline int acpi_walk_dep_device_list(acpi_handle handle) { }
This does not compile when !CONFIG_ACPI.
> +
> static inline int early_acpi_boot_init(void)
> {
> return 0;
> --
> 1.8.4.rc0.1.g8f6a3e5.dirty
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-11-19 16:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 15:20 [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA Lan Tianyu
2014-11-19 16:05 ` Wolfram Sang
2014-11-20 1:54 ` Lan Tianyu
[not found] ` <1416410441-14425-1-git-send-email-tianyu.lan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2014-11-19 16:26 ` Mika Westerberg [this message]
2014-11-20 1:59 ` Lan Tianyu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141119162651.GK1309@lahna.fi.intel.com \
--to=mika.westerberg-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=adamw-cfjF3rc+CpsYNetmKr+vY16hYfS7NtTn@public.gmane.org \
--cc=devel-E0kO6a4B6psdnm+yROfE0A@public.gmane.org \
--cc=jan.brummer-sgYkR6nYkOfYtjvyW6yDsg@public.gmane.org \
--cc=lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lv.zheng-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org \
--cc=robert.moore-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=shigorin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=tianyu.lan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).