From: Jisheng Zhang <jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
To: "wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org"
<wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
"linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: Re: [PATCH] i2c: designware: use {readl|writel}_relaxed instead of readl/writel
Date: Fri, 19 Dec 2014 10:43:15 +0800 [thread overview]
Message-ID: <20141219104315.0ccbba9c@xhacker> (raw)
In-Reply-To: <1418279201-3886-1-git-send-email-jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
Dear all,
Is there any issue I need to resolve so that the patch can be merged?
Thanks in advance,
Jisheng
On Wed, 10 Dec 2014 22:26:41 -0800
Jisheng Zhang <jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org> wrote:
> readl/writel is too expensive especially on Cortex A9 w/ outer L2 cache.
> This introduces i2c read/write errors on Marvell BG2/BG2Q SoCs when there
> are heavy L2 cache maintenance operations at the same time.
>
> The driver does not perform DMA, so it's safe to use the relaxed version.
> From another side, the relaxed io accessor macros are available on all
> architectures now, so we can use the relaxed versions instead.
>
> Signed-off-by: Jisheng Zhang <jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
> ---
> drivers/i2c/busses/i2c-designware-core.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-core.c
> b/drivers/i2c/busses/i2c-designware-core.c index 23628b7..e279948 100644
> --- a/drivers/i2c/busses/i2c-designware-core.c
> +++ b/drivers/i2c/busses/i2c-designware-core.c
> @@ -170,10 +170,10 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset)
> u32 value;
>
> if (dev->accessor_flags & ACCESS_16BIT)
> - value = readw(dev->base + offset) |
> - (readw(dev->base + offset + 2) << 16);
> + value = readw_relaxed(dev->base + offset) |
> + (readw_relaxed(dev->base + offset + 2) << 16);
> else
> - value = readl(dev->base + offset);
> + value = readl_relaxed(dev->base + offset);
>
> if (dev->accessor_flags & ACCESS_SWAP)
> return swab32(value);
> @@ -187,10 +187,10 @@ void dw_writel(struct dw_i2c_dev *dev, u32 b, int
> offset) b = swab32(b);
>
> if (dev->accessor_flags & ACCESS_16BIT) {
> - writew((u16)b, dev->base + offset);
> - writew((u16)(b >> 16), dev->base + offset + 2);
> + writew_relaxed((u16)b, dev->base + offset);
> + writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
> } else {
> - writel(b, dev->base + offset);
> + writel_relaxed(b, dev->base + offset);
> }
> }
>
next prev parent reply other threads:[~2014-12-19 2:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-11 6:26 [PATCH] i2c: designware: use {readl|writel}_relaxed instead of readl/writel Jisheng Zhang
[not found] ` <1418279201-3886-1-git-send-email-jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
2014-12-19 2:43 ` Jisheng Zhang [this message]
2015-01-13 11:52 ` Wolfram Sang
2015-01-13 14:29 ` Mika Westerberg
2015-01-13 14:36 ` Wolfram Sang
2015-01-13 16:28 ` Baruch Siach
2015-01-14 4:05 ` Jisheng Zhang
2015-01-23 16:09 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141219104315.0ccbba9c@xhacker \
--to=jszhang-eyqppykdwxrbdgjk7y7tuq@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).