From: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
To: Sifan Naeem <sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Cc: James Hogan <james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Stable kernel (v3.19+)"
<stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio
Date: Fri, 31 Jul 2015 13:12:52 +0200 [thread overview]
Message-ID: <20150731111252.GL1522@katana> (raw)
In-Reply-To: <1437997641-32575-1-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1948 bytes --]
On Mon, Jul 27, 2015 at 12:47:13PM +0100, Sifan Naeem wrote:
> Following patches are required to fix the existing driver to
> support i2c on pistachio.
>
> Tested on Pistachio bub using an Adafruit I2C Non-Volatile FRAM Breakout
> (256Kbit / 32KByte) eeprom.
>
> Used i2c buildroot tools to test the eeprom and the other i2c blocks.
> Also used dd commands to copy data to and then to dump data from the
> eeprom. i2ctransfer was used to test repeated starts and verified
> using a scope.
That sounds like good testing \o/ If you are happy with i2ctransfer,
then please consider adding Tested-by tags to the i2ctransfer patches,
so Jean gets a more cosy feeling to include them to i2ctools.
>
> Cc: Stable kernel (v3.19+) <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
I am happy for indications like "please consider adding this line for
stable: ...", but not CC stable yourself. These patches need changes,
so they are noise for the stable lists. The ones I ultimately apply are
the proper ones.
That being said, I'll mark all your patches "changes reqeuested" since you
need to resend based on current review from James (thanks a lot!). Even
if some patches are good and got acked, but it is easier for me to mark
them all the same :)
>
> Sifan Naeem (8):
> i2c: img-scb: enable fencing for all versions of the ip
> i2c: img-scb: do dummy writes before fifo access
> i2c: img-scb: use DIV_ROUND_UP to round divisor values
> i2c: img-scb: fix LOW and HIGH period values for the SCL clock
> i2c: img-scb: reset interrupts in img_i2c_soft_reset
> i2c: img-scb: remove start bit detected status after handling
> i2c: img-scb: improve transaction complete handle
> i2c: img-scb: verify support for requested bit rate
>
> drivers/i2c/busses/i2c-img-scb.c | 101 ++++++++++++++++++++++----------------
> 1 file changed, 58 insertions(+), 43 deletions(-)
>
> --
> 1.7.9.5
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2015-07-31 11:12 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-27 11:47 [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio Sifan Naeem
2015-07-27 11:47 ` [PATCH 2/8] i2c: img-scb: do dummy writes before fifo access Sifan Naeem
[not found] ` <1437997641-32575-1-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-27 11:47 ` [PATCH 1/8] i2c: img-scb: enable fencing for all versions of the ip Sifan Naeem
2015-07-27 20:20 ` James Hogan
2015-07-28 9:26 ` Sifan Naeem
2015-07-28 9:38 ` James Hogan
2015-07-27 11:47 ` [PATCH 3/8] i2c: img-scb: use DIV_ROUND_UP to round divisor values Sifan Naeem
[not found] ` <1437997641-32575-4-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-28 10:45 ` James Hogan
2015-07-27 11:47 ` [PATCH 4/8] i2c: img-scb: fix LOW and HIGH period values for the SCL clock Sifan Naeem
2015-07-28 11:27 ` James Hogan
2015-07-31 11:12 ` Wolfram Sang [this message]
2015-09-07 13:41 ` [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio Ezequiel Garcia
[not found] ` <CAAEAJfCW9cEMDZwta5Q6VVEZfzxTDZ50Fx=YeW6bPMnrtKNcbw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-07 13:50 ` Wolfram Sang
2015-09-07 14:22 ` Ezequiel Garcia
[not found] ` <CAAEAJfBj+qdv58gzOnqMrmN0486Enzbn3G1L0KhMctMkEkXfTw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-07 21:13 ` i2ctransfer (Was: [PATCH 0/8] i2c: img-scb: fixes to support i2c on pistachio) Jean Delvare
2015-07-27 11:47 ` [PATCH 5/8] i2c: img-scb: reset interrupts in img_i2c_soft_reset Sifan Naeem
[not found] ` <1437997641-32575-6-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-28 11:35 ` James Hogan
2015-07-28 11:46 ` Sifan Naeem
2015-07-28 11:51 ` James Hogan
2015-07-27 11:47 ` [PATCH 6/8] i2c: img-scb: remove start bit detected status after handling Sifan Naeem
2015-07-28 13:53 ` James Hogan
2015-07-29 12:49 ` Sifan Naeem
2015-07-27 11:47 ` [PATCH 7/8] i2c: img-scb: improve transaction complete handle Sifan Naeem
[not found] ` <1437997641-32575-8-git-send-email-sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-29 12:22 ` James Hogan
[not found] ` <55B8C56A.7050102-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
2015-07-29 13:35 ` Sifan Naeem
2015-07-27 11:47 ` [PATCH 8/8] i2c: img-scb: verify support for requested bit rate Sifan Naeem
2015-07-29 12:02 ` James Hogan
2015-07-29 13:34 ` Sifan Naeem
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150731111252.GL1522@katana \
--to=wsa-z923lk4zbo2bacvfa/9k2g@public.gmane.org \
--cc=james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sifan.naeem-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org \
--cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).