[RFT 0/2] i2c: add support for r8a7795 (RCar H3)

[RFT 0/2] i2c: add support for r8a7795 (RCar H3)

[Wolfram Sang]

Here are the driver updates to support this new SoC. Since I don't have HW
access, this is a request for testing. The IP cores are backwards compatible to
Gen2. So, as long as the clocks are properly setup and the bus speed is OK,
the rest should work out of the box.

Question: Shall I prototype the dtsi additions for these modules? On the one
hand, this is quite some change for not being able to test. On the other hand,
other people might be so busy setting up the rest, so it may be useful after
all.


Wolfram Sang (2):
  i2c: rcar: add support for r8a7795 (R-Car H3)
  i2c: sh_mobile: add support for r8a7795 (R-Car H3)

 Documentation/devicetree/bindings/i2c/i2c-rcar.txt      | 1 +
 Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt | 1 +
 drivers/i2c/busses/i2c-rcar.c                           | 3 +++
 drivers/i2c/busses/i2c-sh_mobile.c                      | 1 +
 4 files changed, 6 insertions(+)

-- 
2.1.4

[RFT 1/2] i2c: rcar: add support for r8a7795 (R-Car H3)

[Wolfram Sang]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Enable the I2C core for this SoC. I add a new type because this version
has new features (e.g. DMA) which will be added somewhen later.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 1 +
 drivers/i2c/busses/i2c-rcar.c                      | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 16b3e07aa98fdd..ea406eb20fa5ad 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -10,6 +10,7 @@ Required properties:
 	"renesas,i2c-r8a7792"
 	"renesas,i2c-r8a7793"
 	"renesas,i2c-r8a7794"
+	"renesas,i2c-r8a7795"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: interrupt specifier.
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index d8361dada58455..3e125654bb288a 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -103,6 +103,7 @@
 enum rcar_i2c_type {
 	I2C_RCAR_GEN1,
 	I2C_RCAR_GEN2,
+	I2C_RCAR_GEN3,
 };
 
 struct rcar_i2c_priv {
@@ -178,6 +179,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
 		cdf_width = 2;
 		break;
 	case I2C_RCAR_GEN2:
+	case I2C_RCAR_GEN3:
 		cdf_width = 3;
 		break;
 	default:
@@ -625,6 +627,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
 	{ .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 },
 	{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
 	{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
-- 
2.1.4

[RFT 2/2] i2c: sh_mobile: add support for r8a7795 (R-Car H3)

[Wolfram Sang]

From: Wolfram Sang <wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>

Enable the I2C core for this SoC. It is compitable to Gen2 SoCs, so
reuse the settings.

Signed-off-by: Wolfram Sang <wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
---
 Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt | 1 +
 drivers/i2c/busses/i2c-sh_mobile.c                      | 1 +
 2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
index 2bfc6e7ed09473..214f94c25d370b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
@@ -10,6 +10,7 @@ Required properties:
 			- "renesas,iic-r8a7792" (R-Car V2H)
 			- "renesas,iic-r8a7793" (R-Car M2-N)
 			- "renesas,iic-r8a7794" (R-Car E2)
+			- "renesas,iic-r8a7795" (R-Car H3)
 			- "renesas,iic-sh73a0" (SH-Mobile AG5)
 - reg             : address start and address range size of device
 - interrupts      : interrupt of device
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 47659a925e09cd..7d2bd3ec2d2d25 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -836,6 +836,7 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
 	{ .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
+	{ .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config },
 	{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
 	{},
 };
-- 
2.1.4

Re: [RFT 1/2] i2c: rcar: add support for r8a7795 (R-Car H3)

[Simon Horman]

On Wed, Aug 05, 2015 at 03:18:25PM +0200, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Enable the I2C core for this SoC. I add a new type because this version
> has new features (e.g. DMA) which will be added somewhen later.

Minor nit: s/somewhen/sometime/
or: s/somewhen //

> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 1 +
>  drivers/i2c/busses/i2c-rcar.c                      | 3 +++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> index 16b3e07aa98fdd..ea406eb20fa5ad 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> @@ -10,6 +10,7 @@ Required properties:
>  	"renesas,i2c-r8a7792"
>  	"renesas,i2c-r8a7793"
>  	"renesas,i2c-r8a7794"
> +	"renesas,i2c-r8a7795"
>  - reg: physical base address of the controller and length of memory mapped
>    region.
>  - interrupts: interrupt specifier.
> diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
> index d8361dada58455..3e125654bb288a 100644
> --- a/drivers/i2c/busses/i2c-rcar.c
> +++ b/drivers/i2c/busses/i2c-rcar.c
> @@ -103,6 +103,7 @@
>  enum rcar_i2c_type {
>  	I2C_RCAR_GEN1,
>  	I2C_RCAR_GEN2,
> +	I2C_RCAR_GEN3,
>  };
>  
>  struct rcar_i2c_priv {
> @@ -178,6 +179,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
>  		cdf_width = 2;
>  		break;
>  	case I2C_RCAR_GEN2:
> +	case I2C_RCAR_GEN3:
>  		cdf_width = 3;
>  		break;
>  	default:
> @@ -625,6 +627,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
>  	{ .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 },
>  	{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
>  	{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
> +	{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
> -- 
> 2.1.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [RFT 1/2] i2c: rcar: add support for r8a7795 (R-Car H3)

[Laurent Pinchart]

Hi Wolfram,

Thank you for the patch.

On Wednesday 05 August 2015 15:18:25 Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Enable the I2C core for this SoC. I add a new type because this version
> has new features (e.g. DMA) which will be added somewhen later.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 1 +
>  drivers/i2c/busses/i2c-rcar.c                      | 3 +++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index
> 16b3e07aa98fdd..ea406eb20fa5ad 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
> @@ -10,6 +10,7 @@ Required properties:
>  	"renesas,i2c-r8a7792"
>  	"renesas,i2c-r8a7793"
>  	"renesas,i2c-r8a7794"
> +	"renesas,i2c-r8a7795"
>  - reg: physical base address of the controller and length of memory mapped
>    region.
>  - interrupts: interrupt specifier.
> diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
> index d8361dada58455..3e125654bb288a 100644
> --- a/drivers/i2c/busses/i2c-rcar.c
> +++ b/drivers/i2c/busses/i2c-rcar.c
> @@ -103,6 +103,7 @@
>  enum rcar_i2c_type {
>  	I2C_RCAR_GEN1,
>  	I2C_RCAR_GEN2,
> +	I2C_RCAR_GEN3,
>  };
> 
>  struct rcar_i2c_priv {
> @@ -178,6 +179,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv
> *priv, cdf_width = 2;
>  		break;
>  	case I2C_RCAR_GEN2:
> +	case I2C_RCAR_GEN3:
>  		cdf_width = 3;
>  		break;
>  	default:
> @@ -625,6 +627,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
>  	{ .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 },
>  	{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
>  	{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
> +	{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },

If H3 is compatible with Gen2, can't you just use I2C_RCAR_GEN2 here ? You can 
always add I2C_RCAR_GEN3 later if you find differences.

>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);

-- 
Regards,

Laurent Pinchart

Re: [RFT 1/2] i2c: rcar: add support for r8a7795 (R-Car H3)

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1116 bytes --]

On Thu, Aug 06, 2015 at 03:34:05AM +0300, Laurent Pinchart wrote:
> Hi Wolfram,
> 
> Thank you for the patch.
> 
> On Wednesday 05 August 2015 15:18:25 Wolfram Sang wrote:
> > From: Wolfram Sang <wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
> > 
> > Enable the I2C core for this SoC. I add a new type because this version
> > has new features (e.g. DMA) which will be added somewhen later.
> > 
> > Signed-off-by: Wolfram Sang <wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
...
> > @@ -625,6 +627,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
> >  	{ .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 },
> >  	{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
> >  	{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
> > +	{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },
> 
> If H3 is compatible with Gen2, can't you just use I2C_RCAR_GEN2 here ? You can 
> always add I2C_RCAR_GEN3 later if you find differences.

Is the patch description not clear enough?


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [RFT 1/2] i2c: rcar: add support for r8a7795 (R-Car H3)

[Laurent Pinchart]

On Thursday 06 August 2015 02:38:49 Wolfram Sang wrote:
> On Thu, Aug 06, 2015 at 03:34:05AM +0300, Laurent Pinchart wrote:
> > Hi Wolfram,
> > 
> > Thank you for the patch.
> > 
> > On Wednesday 05 August 2015 15:18:25 Wolfram Sang wrote:
> > > From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > > 
> > > Enable the I2C core for this SoC. I add a new type because this version
> > > has new features (e.g. DMA) which will be added somewhen later.
> > > 
> > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> ...
> 
> > > @@ -625,6 +627,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] =
> > > {
> > >  	{ .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2
> > >  	},
> > >  	{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2
> > >  	},
> > >  	{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2
> > >  	},
> > > +	{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3
> > > },
> > 
> > If H3 is compatible with Gen2, can't you just use I2C_RCAR_GEN2 here ? You
> > can always add I2C_RCAR_GEN3 later if you find differences.
> 
> Is the patch description not clear enough?

My bad. I should go to bed. And so should you by the way ;-)

-- 
Regards,

Laurent Pinchart

Re: [RFT 1/2] i2c: rcar: add support for r8a7795 (R-Car H3)

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 109 bytes --]


> My bad. I should go to bed. And so should you by the way ;-)

Acked-by: Wolfram Sang <wsa@the-dreams.de>


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [RFT 0/2] i2c: add support for r8a7795 (RCar H3)

[Kuninori Morimoto]

Hi Wolfram

> Here are the driver updates to support this new SoC. Since I don't have HW
> access, this is a request for testing. The IP cores are backwards compatible to
> Gen2. So, as long as the clocks are properly setup and the bus speed is OK,
> the rest should work out of the box.
> 
> Question: Shall I prototype the dtsi additions for these modules? On the one
> hand, this is quite some change for not being able to test. On the other hand,
> other people might be so busy setting up the rest, so it may be useful after
> all.
> 
> 
> Wolfram Sang (2):
>   i2c: rcar: add support for r8a7795 (R-Car H3)
>   i2c: sh_mobile: add support for r8a7795 (R-Car H3)
> 
>  Documentation/devicetree/bindings/i2c/i2c-rcar.txt      | 1 +
>  Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt | 1 +
>  drivers/i2c/busses/i2c-rcar.c                           | 3 +++
>  drivers/i2c/busses/i2c-sh_mobile.c                      | 1 +
>  4 files changed, 6 insertions(+)

For all patches, on Salvator-X board with ak4613 / cs2000 chip

Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>