public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa@the-dreams.de>
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Christian Ruppert <christian.ruppert@alitech.com>,
	Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Pavel Roskin <plroskin@gmail.com>,
	linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348
Date: Thu, 15 Oct 2015 13:40:29 +0200	[thread overview]
Message-ID: <20151015114029.GB1546@katana> (raw)
In-Reply-To: <1443085614-101362-1-git-send-email-mika.westerberg@linux.intel.com>

[-- Attachment #1: Type: text/plain, Size: 1894 bytes --]

On Thu, Sep 24, 2015 at 12:06:54PM +0300, Mika Westerberg wrote:
> ACPI SSCN/FMCN methods were originally added because then the platform can
> provide the most accurate HCNT/LCNT values to the driver. However, this
> seems not to be true for Dell Inspiron 7348 where using these causes the
> touchpad to fail in boot:
> 
>   i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
>   i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
>   i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
>   i2c_designware INT3433:00: controller timed out
> 
> The values received from ACPI are (in fast mode):
> 
>   HCNT: 72
>   LCNT: 160
> 
> this translates to following timings (input clock is 100MHz on Broadwell):
> 
>   tHIGH: 720 ns (spec min 600 ns)
>   tLOW: 1600 ns (spec min 1300 ns)
>   Bus period: 2920 ns (assuming 300 ns tf and tr)
>   Bus speed: 342.5 kHz
> 
> Both tHIGH and tLOW are within the I2C specification.
> 
> The calculated values when ACPI parameters are not used are (in fast mode):
> 
>   HCNT: 87
>   LCNT: 159
> 
> which translates to:
> 
>   tHIGH: 870 ns (spec min 600 ns)
>   tLOW: 1590 ns (spec min 1300 ns)
>   Bus period 3060 ns (assuming 300 ns tf and tr)
>   Bus speed 326.8 kHz
> 
> These values are also within the I2C specification.
> 
> Since both ACPI and calculated values meet the I2C specification timing
> requirements it is hard to say why the touchpad does not function properly
> with the ACPI values except that the bus speed is higher in this case (but
> still well below the max 400kHz).
> 
> Solve this by adding DMI quirk to the driver that disables using ACPI
> parameters on this particulare machine.
> 
> Reported-by: Pavel Roskin <plroskin@gmail.com>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Pavel, have you tested this patch?


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2015-10-15 11:40 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-24  9:06 [PATCH] i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 Mika Westerberg
2015-10-15 11:40 ` Wolfram Sang [this message]
2015-10-17 16:19   ` Pavel Roskin
2015-10-17 17:57 ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151015114029.GB1546@katana \
    --to=wsa@the-dreams.de \
    --cc=christian.ruppert@alitech.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=plroskin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox