From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [PATCH V3] Intel Lewisburg device IDs for SMBus Date: Fri, 6 Nov 2015 11:47:32 +0100 Message-ID: <20151106114732.0b6d6ab2@endymion.delvare> References: <[PATCH V3] Intel Lewisburg device IDs for SMBus> <1446752425-14476-1-git-send-email-alexandra.yates@linux.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de ([195.135.220.15]:42085 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1032934AbbKFKrg (ORCPT ); Fri, 6 Nov 2015 05:47:36 -0500 In-Reply-To: <1446752425-14476-1-git-send-email-alexandra.yates@linux.intel.com> Sender: linux-i2c-owner@vger.kernel.org List-Id: linux-i2c@vger.kernel.org To: Alexandra Yates Cc: wsa@the-dreams.de, corbet@lwn.net, linux-i2c@vger.kernel.org On Thu, 5 Nov 2015 11:40:25 -0800, Alexandra Yates wrote: > Adding Intel codename Lewisburg platform device IDs for SMBus. > > Signed-off-by: Alexandra Yates > Reviewed-by: Jean Delvare > --- > Documentation/i2c/busses/i2c-i801 | 1 + > drivers/i2c/busses/Kconfig | 1 + > drivers/i2c/busses/i2c-i801.c | 6 ++++++ > 3 files changed, 8 insertions(+) > > diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 > index 6a4b1af..1bba38d 100644 > --- a/Documentation/i2c/busses/i2c-i801 > +++ b/Documentation/i2c/busses/i2c-i801 > @@ -32,6 +32,7 @@ Supported adapters: > * Intel Sunrise Point-LP (PCH) > * Intel DNV (SOC) > * Intel Broxton (SOC) > + * Intel Lewisburg (PCH) > Datasheets: Publicly available at the Intel website > > On Intel Patsburg and later chipsets, both the normal host SMBus controller > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index e24c2b6..7b0aa82 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -126,6 +126,7 @@ config I2C_I801 > Sunrise Point-LP (PCH) > DNV (SOC) > Broxton (SOC) > + Lewisburg (PCH) > > This driver can also be built as a module. If so, the module > will be called i2c-i801. > diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c > index c306751..f62d697 100644 > --- a/drivers/i2c/busses/i2c-i801.c > +++ b/drivers/i2c/busses/i2c-i801.c > @@ -62,6 +62,8 @@ > * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes > * DNV (SOC) 0x19df 32 hard yes yes yes > * Broxton (SOC) 0x5ad4 32 hard yes yes yes > + * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes > + * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes > * > * Features supported by this driver: > * Software PEC no > @@ -206,6 +208,8 @@ > #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 > #define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df > #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 > +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3 > +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 > > struct i801_mux_config { > char *gpio_chip; > @@ -869,6 +873,8 @@ static const struct pci_device_id i801_ids[] = { > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) }, > + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, > + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, > { 0, } > }; > Perfect, thanks. -- Jean Delvare SUSE L3 Support