[PATCH v2 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8

[PATCH v2 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8

[LABBE Corentin]

The simple_strtoul function is marked as obsolete.
This patch replace it by kstrtou8.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
---
 drivers/i2c/busses/i2c-taos-evm.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index 4c7fc2d..552f127 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -70,6 +70,7 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	struct serio *serio = adapter->algo_data;
 	struct taos_data *taos = serio_get_drvdata(serio);
 	char *p;
+	int err;
 
 	/* Encode our transaction. "@" is for the device address, "$" for the
 	   SMBus command and "#" for the data. */
@@ -130,7 +131,14 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 			return 0;
 	} else {
 		if (p[0] == 'x') {
-			data->byte = simple_strtol(p + 1, NULL, 16);
+			/*
+			 * voluntary dropping error code of kstrtou8 since all
+			 * error code that it could return are invalid according
+			 * to Documentation/i2c/fault-codes
+			 */
+			err = kstrtou8(p + 1, 16, &data->byte);
+			if (err)
+				return -EPROTO;
 			return 0;
 		}
 	}
-- 
2.4.10

Re: [PATCH v2 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8

[Jean Delvare]

Hi Corentin,

On Wed, 18 Nov 2015 09:00:53 +0100, LABBE Corentin wrote:
> The simple_strtoul function is marked as obsolete.
> This patch replace it by kstrtou8.
> 
> Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
> ---
>  drivers/i2c/busses/i2c-taos-evm.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
> index 4c7fc2d..552f127 100644
> --- a/drivers/i2c/busses/i2c-taos-evm.c
> +++ b/drivers/i2c/busses/i2c-taos-evm.c
> @@ -70,6 +70,7 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
>  	struct serio *serio = adapter->algo_data;
>  	struct taos_data *taos = serio_get_drvdata(serio);
>  	char *p;
> +	int err;
>  
>  	/* Encode our transaction. "@" is for the device address, "$" for the
>  	   SMBus command and "#" for the data. */
> @@ -130,7 +131,14 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
>  			return 0;
>  	} else {
>  		if (p[0] == 'x') {
> -			data->byte = simple_strtol(p + 1, NULL, 16);
> +			/*
> +			 * voluntary dropping error code of kstrtou8 since all

"Voluntarily" or "Willingly" would be more correct.

> +			 * error code that it could return are invalid according
> +			 * to Documentation/i2c/fault-codes
> +			 */
> +			err = kstrtou8(p + 1, 16, &data->byte);
> +			if (err)
> +				return -EPROTO;
>  			return 0;
>  		}
>  	}

Thanks for the patch. Note that you don't strictly need the "err"
variable as you never use its value.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>

-- 
Jean Delvare
SUSE L3 Support

Re: [PATCH v2 1/1] i2c: taos-evm: replace simple_strtoul by kstrtou8

[LABBE Corentin]

On Wed, Nov 18, 2015 at 10:29:54AM +0100, Jean Delvare wrote:
> Hi Corentin,
> 
> On Wed, 18 Nov 2015 09:00:53 +0100, LABBE Corentin wrote:
> > The simple_strtoul function is marked as obsolete.
> > This patch replace it by kstrtou8.
> > 
> > Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
> > ---
> >  drivers/i2c/busses/i2c-taos-evm.c | 10 +++++++++-
> >  1 file changed, 9 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
> > index 4c7fc2d..552f127 100644
> > --- a/drivers/i2c/busses/i2c-taos-evm.c
> > +++ b/drivers/i2c/busses/i2c-taos-evm.c
> > @@ -70,6 +70,7 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
> >  	struct serio *serio = adapter->algo_data;
> >  	struct taos_data *taos = serio_get_drvdata(serio);
> >  	char *p;
> > +	int err;
> >  
> >  	/* Encode our transaction. "@" is for the device address, "$" for the
> >  	   SMBus command and "#" for the data. */
> > @@ -130,7 +131,14 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
> >  			return 0;
> >  	} else {
> >  		if (p[0] == 'x') {
> > -			data->byte = simple_strtol(p + 1, NULL, 16);
> > +			/*
> > +			 * voluntary dropping error code of kstrtou8 since all
> 
> "Voluntarily" or "Willingly" would be more correct.
> 
> > +			 * error code that it could return are invalid according
> > +			 * to Documentation/i2c/fault-codes
> > +			 */
> > +			err = kstrtou8(p + 1, 16, &data->byte);
> > +			if (err)
> > +				return -EPROTO;
> >  			return 0;
> >  		}
> >  	}
> 
> Thanks for the patch. Note that you don't strictly need the "err"
> variable as you never use its value.
> 
> Reviewed-by: Jean Delvare <jdelvare@suse.de>
> Tested-by: Jean Delvare <jdelvare@suse.de>
> 

Thanks

I will send a v3 without the err and the spell fix.

Regards