* [PATCH v2 01/10] i2c-octeon: Cleanup i2c-octeon driver
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-05 18:47 ` Wolfram Sang
2016-03-04 17:57 ` [PATCH v2 02/10] i2c-octeon: Support I2C_M_RECV_LEN Jan Glauber
` (8 subsequent siblings)
9 siblings, 1 reply; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-kernel, linux-i2c, David Daney, Jan Glauber
Cleanup only without functional change.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
---
drivers/i2c/busses/i2c-octeon.c | 442 +++++++++++++++++++++-------------------
1 file changed, 230 insertions(+), 212 deletions(-)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 32914ab..1f14094 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -2,7 +2,7 @@
* (C) Copyright 2009-2010
* Nokia Siemens Networks, michael.lawnick.ext@nsn.com
*
- * Portions Copyright (C) 2010, 2011 Cavium Networks, Inc.
+ * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
*
* This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
*
@@ -24,99 +24,154 @@
#include <asm/octeon/octeon.h>
-#define DRV_NAME "i2c-octeon"
+#define DRV_NAME "i2c-octeon"
-/* The previous out-of-tree version was implicitly version 1.0. */
-#define DRV_VERSION "2.0"
+/* Register offsets */
+#define SW_TWSI 0x00
+#define TWSI_INT 0x10
+#define SW_TWSI_EXT 0x18
-/* register offsets */
-#define SW_TWSI 0x00
-#define TWSI_INT 0x10
+#define INT_ENA_ST 0x1
+#define INT_ENA_TS 0x2
+#define INT_ENA_CORE 0x4
/* Controller command patterns */
-#define SW_TWSI_V 0x8000000000000000ull
-#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull
-#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull
-#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull
-#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull
-#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull
-#define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull
-#define SW_TWSI_R 0x0100000000000000ull
+#define SW_TWSI_V (1ULL << 63)
+#define SW_TWSI_EIA (1ULL << 61)
+#define SW_TWSI_R (1ULL << 56)
+#define SW_TWSI_SOVR (1ULL << 55)
+#define SW_TWSI_OP_7 (0ULL << 57)
+#define SW_TWSI_OP_7_IA (1ULL << 57)
+#define SW_TWSI_OP_10 (2ULL << 57)
+#define SW_TWSI_OP_10_IA (3ULL << 57)
+#define SW_TWSI_OP_TWSI_CLK (1ULL << 59)
+#define SW_TWSI_SIZE_SHIFT 52
+#define SW_TWSI_A_SHIFT 40
+#define SW_TWSI_IA_SHIFT 32
+#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ULL
+#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ULL
+#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ULL
+#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ULL
+#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ULL
/* Controller command and status bits */
-#define TWSI_CTL_CE 0x80
-#define TWSI_CTL_ENAB 0x40
-#define TWSI_CTL_STA 0x20
-#define TWSI_CTL_STP 0x10
-#define TWSI_CTL_IFLG 0x08
-#define TWSI_CTL_AAK 0x04
+#define TWSI_CTL_CE 0x80 /* High level controller enable */
+#define TWSI_CTL_ENAB 0x40 /* Bus enable */
+#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */
+#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */
+#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
+#define TWSI_CTL_AAK 0x04 /* Assert ACK */
/* Some status values */
-#define STAT_START 0x08
-#define STAT_RSTART 0x10
-#define STAT_TXADDR_ACK 0x18
-#define STAT_TXDATA_ACK 0x28
-#define STAT_RXADDR_ACK 0x40
-#define STAT_RXDATA_ACK 0x50
-#define STAT_IDLE 0xF8
+#define STAT_ERROR 0x00
+#define STAT_START 0x08
+#define STAT_RSTART 0x10
+#define STAT_TXADDR_ACK 0x18
+#define STAT_TXADDR_NAK 0x20
+#define STAT_TXDATA_ACK 0x28
+#define STAT_TXDATA_NAK 0x30
+#define STAT_LOST_ARB_38 0x38
+#define STAT_RXADDR_ACK 0x40
+#define STAT_RXADDR_NAK 0x48
+#define STAT_RXDATA_ACK 0x50
+#define STAT_RXDATA_NAK 0x58
+#define STAT_SLAVE_60 0x60
+#define STAT_LOST_ARB_68 0x68
+#define STAT_SLAVE_70 0x70
+#define STAT_LOST_ARB_78 0x78
+#define STAT_SLAVE_80 0x80
+#define STAT_SLAVE_88 0x88
+#define STAT_GENDATA_ACK 0x90
+#define STAT_GENDATA_NAK 0x98
+#define STAT_SLAVE_A0 0xA0
+#define STAT_SLAVE_A8 0xA8
+#define STAT_LOST_ARB_B0 0xB0
+#define STAT_SLAVE_LOST 0xB8
+#define STAT_SLAVE_NAK 0xC0
+#define STAT_SLAVE_ACK 0xC8
+#define STAT_AD2W_ACK 0xD0
+#define STAT_AD2W_NAK 0xD8
+#define STAT_IDLE 0xF8
+
+/* TWSI_INT values */
+#define ST_INT 0x01
+#define TS_INT 0x02
+#define CORE_INT 0x04
+#define ST_EN 0x10
+#define TS_EN 0x20
+#define CORE_EN 0x40
+#define SDA_OVR 0x100
+#define SCL_OVR 0x200
+#define SDA 0x400
+#define SCL 0x800
struct octeon_i2c {
- wait_queue_head_t queue;
- struct i2c_adapter adap;
- int irq;
- u32 twsi_freq;
- int sys_freq;
- resource_size_t twsi_phys;
- void __iomem *twsi_base;
- resource_size_t regsize;
- struct device *dev;
+ wait_queue_head_t queue;
+ struct i2c_adapter adap;
+ int irq;
+ u32 twsi_freq;
+ int sys_freq;
+ void __iomem *twsi_base;
+ struct device *dev;
};
/**
- * octeon_i2c_write_sw - write an I2C core register.
- * @i2c: The struct octeon_i2c.
- * @eop_reg: Register selector.
- * @data: Value to be written.
+ * octeon_i2c_write_sw - write an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ * @data: Value to be written
*
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
*/
-static void octeon_i2c_write_sw(struct octeon_i2c *i2c,
- u64 eop_reg,
- u8 data)
+static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
{
u64 tmp;
__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
- do {
+ do
tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
- } while ((tmp & SW_TWSI_V) != 0);
+ while ((tmp & SW_TWSI_V) != 0);
}
/**
- * octeon_i2c_read_sw - write an I2C core register.
- * @i2c: The struct octeon_i2c.
- * @eop_reg: Register selector.
+ * octeon_i2c_read_sw64 - read an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
*
* Returns the data.
*
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
*/
-static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
+static u64 octeon_i2c_read_sw64(struct octeon_i2c *i2c, u64 eop_reg)
{
u64 tmp;
__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
- do {
+ do
tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
- } while ((tmp & SW_TWSI_V) != 0);
+ while ((tmp & SW_TWSI_V) != 0);
- return tmp & 0xFF;
+ return tmp;
+}
+
+/**
+ * octeon_i2c_read_sw - read lower bits of an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ *
+ * Returns the data.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
+{
+ return octeon_i2c_read_sw64(i2c, eop_reg);
}
/**
* octeon_i2c_write_int - write the TWSI_INT register
- * @i2c: The struct octeon_i2c.
- * @data: Value to be written.
+ * @i2c: The struct octeon_i2c
+ * @data: Value to be written
*/
static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
{
@@ -125,57 +180,52 @@ static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
}
/**
- * octeon_i2c_int_enable - enable the TS interrupt.
- * @i2c: The struct octeon_i2c.
+ * octeon_i2c_int_enable - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
*
- * The interrupt will be asserted when there is non-STAT_IDLE state in
- * the SW_TWSI_EOP_TWSI_STAT register.
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
*/
static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
{
- octeon_i2c_write_int(i2c, 0x40);
+ octeon_i2c_write_int(i2c, CORE_EN);
}
-/**
- * octeon_i2c_int_disable - disable the TS interrupt.
- * @i2c: The struct octeon_i2c.
- */
+/* disable the CORE interrupt */
static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
{
- octeon_i2c_write_int(i2c, 0);
+ /* clear TS/ST/IFLG events */
+ octeon_i2c_write_int(i2c, TS_INT | ST_INT);
}
/**
- * octeon_i2c_unblock - unblock the bus.
- * @i2c: The struct octeon_i2c.
+ * bitbang_unblock - unblock the bus
+ * @i2c: The struct octeon_i2c
*
- * If there was a reset while a device was driving 0 to bus,
- * bus is blocked. We toggle it free manually by some clock
- * cycles and send a stop.
+ * If there was a reset while a device was driving 0 to bus, bus is blocked.
+ * We toggle it free manually by some clock cycles and send a stop.
*/
-static void octeon_i2c_unblock(struct octeon_i2c *i2c)
+static void bitbang_unblock(struct octeon_i2c *i2c)
{
int i;
dev_dbg(i2c->dev, "%s\n", __func__);
+
for (i = 0; i < 9; i++) {
- octeon_i2c_write_int(i2c, 0x0);
+ octeon_i2c_write_int(i2c, 0);
udelay(5);
- octeon_i2c_write_int(i2c, 0x200);
+ octeon_i2c_write_int(i2c, SCL_OVR);
udelay(5);
}
- octeon_i2c_write_int(i2c, 0x300);
+ /* hand-crank a STOP */
+ octeon_i2c_write_int(i2c, SDA_OVR | SCL_OVR);
udelay(5);
- octeon_i2c_write_int(i2c, 0x100);
+ octeon_i2c_write_int(i2c, SDA_OVR);
udelay(5);
- octeon_i2c_write_int(i2c, 0x0);
+ octeon_i2c_write_int(i2c, 0);
}
-/**
- * octeon_i2c_isr - the interrupt service routine.
- * @int: The irq, unused.
- * @dev_id: Our struct octeon_i2c.
- */
+/* interrupt service routine */
static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
{
struct octeon_i2c *i2c = dev_id;
@@ -186,15 +236,15 @@ static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-
static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
{
- return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0;
+ return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL)
+ & TWSI_CTL_IFLG) != 0;
}
/**
- * octeon_i2c_wait - wait for the IFLG to be set.
- * @i2c: The struct octeon_i2c.
+ * octeon_i2c_wait - wait for the IFLG to be set
+ * @i2c: The struct octeon_i2c
*
* Returns 0 on success, otherwise a negative errno.
*/
@@ -203,34 +253,64 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
long result;
octeon_i2c_int_enable(i2c);
-
- result = wait_event_timeout(i2c->queue,
- octeon_i2c_test_iflg(i2c),
- i2c->adap.timeout);
-
+ result = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
+ i2c->adap.timeout);
octeon_i2c_int_disable(i2c);
-
- if (result == 0) {
+ if (!result) {
dev_dbg(i2c->dev, "%s: timeout\n", __func__);
return -ETIMEDOUT;
}
-
return 0;
}
+/* send STOP to the bus */
+static void octeon_i2c_stop(struct octeon_i2c *i2c)
+{
+ u8 data;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STP);
+
+ data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
+ if (data != STAT_IDLE)
+ dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data);
+}
+
+static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+{
+ u8 status;
+ int tries;
+
+ /* disable high level controller, enable bus access */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ /* reset controller */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+
+ for (tries = 10; tries; tries--) {
+ udelay(1);
+ status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if (status == STAT_IDLE)
+ return 0;
+ }
+ dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
+ return -EIO;
+}
+
/**
- * octeon_i2c_start - send START to the bus.
- * @i2c: The struct octeon_i2c.
+ * octeon_i2c_start - send START to the bus
+ * @i2c: The struct octeon_i2c
*
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_start(struct octeon_i2c *i2c)
{
- u8 data;
int result;
+ u8 data;
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STA);
+ TWSI_CTL_ENAB | TWSI_CTL_STA);
result = octeon_i2c_wait(i2c);
if (result) {
@@ -240,10 +320,9 @@ static int octeon_i2c_start(struct octeon_i2c *i2c)
* be a client is holding SDA low - let's try
* to free it.
*/
- octeon_i2c_unblock(i2c);
+ bitbang_unblock(i2c);
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
TWSI_CTL_ENAB | TWSI_CTL_STA);
-
result = octeon_i2c_wait(i2c);
}
if (result)
@@ -255,47 +334,24 @@ static int octeon_i2c_start(struct octeon_i2c *i2c)
dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data);
return -EIO;
}
-
- return 0;
-}
-
-/**
- * octeon_i2c_stop - send STOP to the bus.
- * @i2c: The struct octeon_i2c.
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_stop(struct octeon_i2c *i2c)
-{
- u8 data;
-
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STP);
-
- data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
-
- if (data != STAT_IDLE) {
- dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data);
- return -EIO;
- }
return 0;
}
/**
- * octeon_i2c_write - send data to the bus.
- * @i2c: The struct octeon_i2c.
- * @target: Target address.
- * @data: Pointer to the data to be sent.
- * @length: Length of the data.
+ * octeon_i2c_write - send data to the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the data to be sent
+ * @length: Length of the data
*
* The address is sent over the bus, then the data.
*
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
- const u8 *data, int length)
+ u8 *data, int length)
{
- int i, result;
+ int result, i;
u8 tmp;
result = octeon_i2c_start(i2c);
@@ -311,6 +367,7 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
for (i = 0; i < length; i++) {
tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
dev_err(i2c->dev,
"%s: bad status before write (0x%x)\n",
@@ -330,19 +387,20 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
}
/**
- * octeon_i2c_read - receive data from the bus.
- * @i2c: The struct octeon_i2c.
- * @target: Target address.
- * @data: Pointer to the location to store the datae .
- * @length: Length of the data.
+ * octeon_i2c_read - receive data from the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the location to store the data
+ * @rlength: Length of the data
*
* The address is sent over the bus, then the data is read.
*
* Returns 0 on success, otherwise a negative errno.
*/
-static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
- u8 *data, int length)
+static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
+ u16 *rlength)
{
+ int length = *rlength;
int i, result;
u8 tmp;
@@ -353,15 +411,14 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
if (result)
return result;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
-
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, TWSI_CTL_ENAB);
result = octeon_i2c_wait(i2c);
if (result)
return result;
for (i = 0; i < length; i++) {
tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
dev_err(i2c->dev,
"%s: bad status before read (0x%x)\n",
@@ -369,12 +426,12 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
return -EIO;
}
- if (i+1 < length)
+ if (i + 1 < length)
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_AAK);
+ TWSI_CTL_ENAB | TWSI_CTL_AAK);
else
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB);
+ TWSI_CTL_ENAB);
result = octeon_i2c_wait(i2c);
if (result)
@@ -382,43 +439,41 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
}
+ *rlength = length;
return 0;
}
/**
- * octeon_i2c_xfer - The driver's master_xfer function.
- * @adap: Pointer to the i2c_adapter structure.
- * @msgs: Pointer to the messages to be processed.
- * @num: Length of the MSGS array.
+ * octeon_i2c_xfer - The driver's master_xfer function
+ * @adap: Pointer to the i2c_adapter structure
+ * @msgs: Pointer to the messages to be processed
+ * @num: Length of the MSGS array
*
- * Returns the number of messages processed, or a negative errno on
- * failure.
+ * Returns the number of messages processed, or a negative errno on failure.
*/
-static int octeon_i2c_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs,
+static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
- struct i2c_msg *pmsg;
- int i;
- int ret = 0;
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+ int i, ret = 0;
for (i = 0; ret == 0 && i < num; i++) {
- pmsg = &msgs[i];
+ struct i2c_msg *pmsg = &msgs[i];
+
dev_dbg(i2c->dev,
"Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
pmsg->flags & I2C_M_RD ? "read" : "write",
pmsg->len, pmsg->addr, i + 1, num);
if (pmsg->flags & I2C_M_RD)
ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
- pmsg->len);
+ &pmsg->len);
else
ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
- pmsg->len);
+ pmsg->len);
}
octeon_i2c_stop(i2c);
- return (ret != 0) ? ret : num;
+ return ret ? -EAGAIN : num;
}
static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
@@ -435,13 +490,10 @@ static struct i2c_adapter octeon_i2c_ops = {
.owner = THIS_MODULE,
.name = "OCTEON adapter",
.algo = &octeon_i2c_algo,
- .timeout = HZ / 50,
};
-/**
- * octeon_i2c_setclock - Calculate and set clock divisors.
- */
-static int octeon_i2c_setclock(struct octeon_i2c *i2c)
+/* calculate and set clock divisors */
+static void octeon_i2c_setclock(struct octeon_i2c *i2c)
{
int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
@@ -449,8 +501,7 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c)
for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
/*
* An mdiv value of less than 2 seems to not work well
- * with ds1337 RTCs, so we constrain it to larger
- * values.
+ * with ds1337 RTCs, so we constrain it to larger values.
*/
for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
/*
@@ -460,6 +511,7 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c)
tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
tclk *= (1 << ndiv_idx);
thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+
for (inc = 0; inc <= 1; inc++) {
thp_idx = thp_base + inc;
if (thp_idx < 5 || thp_idx > 0xff)
@@ -480,36 +532,14 @@ static int octeon_i2c_setclock(struct octeon_i2c *i2c)
}
octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
-
- return 0;
-}
-
-static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
-{
- u8 status;
- int tries;
-
- /* disable high level controller, enable bus access */
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
-
- /* reset controller */
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
-
- for (tries = 10; tries; tries--) {
- udelay(1);
- status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
- if (status == STAT_IDLE)
- return 0;
- }
- dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
- return -EIO;
}
static int octeon_i2c_probe(struct platform_device *pdev)
{
+ struct device_node *node = pdev->dev.of_node;
int irq, result = 0;
- struct octeon_i2c *i2c;
struct resource *res_mem;
+ struct octeon_i2c *i2c;
/* All adaptors have an irq. */
irq = platform_get_irq(pdev, 0);
@@ -518,7 +548,6 @@ static int octeon_i2c_probe(struct platform_device *pdev)
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c) {
- dev_err(&pdev->dev, "kzalloc failed\n");
result = -ENOMEM;
goto out;
}
@@ -531,18 +560,14 @@ static int octeon_i2c_probe(struct platform_device *pdev)
result = -ENXIO;
goto out;
}
- i2c->twsi_phys = res_mem->start;
- i2c->regsize = resource_size(res_mem);
/*
* "clock-rate" is a legacy binding, the official binding is
* "clock-frequency". Try the official one first and then
* fall back if it doesn't exist.
*/
- if (of_property_read_u32(pdev->dev.of_node,
- "clock-frequency", &i2c->twsi_freq) &&
- of_property_read_u32(pdev->dev.of_node,
- "clock-rate", &i2c->twsi_freq)) {
+ if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
+ of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
dev_err(i2c->dev,
"no I2C 'clock-rate' or 'clock-frequency' property\n");
result = -ENXIO;
@@ -551,15 +576,15 @@ static int octeon_i2c_probe(struct platform_device *pdev)
i2c->sys_freq = octeon_get_io_clock_rate();
- if (!devm_request_mem_region(&pdev->dev, i2c->twsi_phys, i2c->regsize,
- res_mem->name)) {
+ if (!devm_request_mem_region(&pdev->dev, res_mem->start,
+ resource_size(res_mem), res_mem->name)) {
dev_err(i2c->dev, "request_mem_region failed\n");
goto out;
}
- i2c->twsi_base = devm_ioremap(&pdev->dev, i2c->twsi_phys, i2c->regsize);
+ i2c->twsi_base = devm_ioremap(&pdev->dev, res_mem->start,
+ resource_size(res_mem));
init_waitqueue_head(&i2c->queue);
-
i2c->irq = irq;
result = devm_request_irq(&pdev->dev, i2c->irq,
@@ -575,15 +600,12 @@ static int octeon_i2c_probe(struct platform_device *pdev)
goto out;
}
- result = octeon_i2c_setclock(i2c);
- if (result) {
- dev_err(i2c->dev, "clock init failed\n");
- goto out;
- }
+ octeon_i2c_setclock(i2c);
i2c->adap = octeon_i2c_ops;
+ i2c->adap.timeout = msecs_to_jiffies(50);
i2c->adap.dev.parent = &pdev->dev;
- i2c->adap.dev.of_node = pdev->dev.of_node;
+ i2c->adap.dev.of_node = node;
i2c_set_adapdata(&i2c->adap, i2c);
platform_set_drvdata(pdev, i2c);
@@ -592,8 +614,7 @@ static int octeon_i2c_probe(struct platform_device *pdev)
dev_err(i2c->dev, "failed to add adapter\n");
goto out;
}
- dev_info(i2c->dev, "version %s\n", DRV_VERSION);
-
+ dev_info(i2c->dev, "probed\n");
return 0;
out:
@@ -608,10 +629,8 @@ static int octeon_i2c_remove(struct platform_device *pdev)
return 0;
};
-static struct of_device_id octeon_i2c_match[] = {
- {
- .compatible = "cavium,octeon-3860-twsi",
- },
+static const struct of_device_id octeon_i2c_match[] = {
+ { .compatible = "cavium,octeon-3860-twsi", },
{},
};
MODULE_DEVICE_TABLE(of, octeon_i2c_match);
@@ -630,4 +649,3 @@ module_platform_driver(octeon_i2c_driver);
MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v2 01/10] i2c-octeon: Cleanup i2c-octeon driver
2016-03-04 17:57 ` [PATCH v2 01/10] i2c-octeon: Cleanup i2c-octeon driver Jan Glauber
@ 2016-03-05 18:47 ` Wolfram Sang
2016-03-06 13:00 ` Jan Glauber
0 siblings, 1 reply; 14+ messages in thread
From: Wolfram Sang @ 2016-03-05 18:47 UTC (permalink / raw)
To: Jan Glauber; +Cc: linux-kernel, linux-i2c, David Daney
[-- Attachment #1: Type: text/plain, Size: 5545 bytes --]
Hi Jan,
The description is not enough. A list what kind of changes you applied
would be nice.
I'd like to have these checkpatch issues fixed:
ERROR: trailing statements should be on next line
#177: FILE: drivers/i2c/busses/i2c-octeon.c:133:
+ while ((tmp & SW_TWSI_V) != 0);
ERROR: trailing statements should be on next line
#202: FILE: drivers/i2c/busses/i2c-octeon.c:152:
+ while ((tmp & SW_TWSI_V) != 0);
CHECK: Prefer using the BIT_ULL macro
#52: FILE: drivers/i2c/busses/i2c-octeon.c:39:
+#define SW_TWSI_V (1ULL << 63)
Note: I don't care so much about the 80 char limit as long as the line
length is not too excessive.
> -#define DRV_NAME "i2c-octeon"
> +#define DRV_NAME "i2c-octeon"
I'm in favor for indenting register and bit defines, but other than that
I think one space is enough. I won't force my opinion on you, though.
Just wanted to let you know.
> +#define INT_ENA_ST 0x1
> +#define INT_ENA_TS 0x2
> +#define INT_ENA_CORE 0x4
I assume those are bits? Then, they shouldn't be in the registers
section.
> +/* TWSI_INT values */
> +#define ST_INT 0x01
> +#define TS_INT 0x02
> +#define CORE_INT 0x04
> +#define ST_EN 0x10
> +#define TS_EN 0x20
> +#define CORE_EN 0x40
> +#define SDA_OVR 0x100
> +#define SCL_OVR 0x200
> +#define SDA 0x400
> +#define SCL 0x800
I think those should have a prefix. SDA and SCL are dangerously generic.
> struct octeon_i2c {
> - wait_queue_head_t queue;
> - struct i2c_adapter adap;
> - int irq;
> - u32 twsi_freq;
> - int sys_freq;
> - resource_size_t twsi_phys;
> - void __iomem *twsi_base;
> - resource_size_t regsize;
> - struct device *dev;
> + wait_queue_head_t queue;
> + struct i2c_adapter adap;
> + int irq;
> + u32 twsi_freq;
> + int sys_freq;
> + void __iomem *twsi_base;
> + struct device *dev;
NAK. structs change often, and then one needs to fix the whole
indentation. One space is enough here.
> };
> -static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
> +static u64 octeon_i2c_read_sw64(struct octeon_i2c *i2c, u64 eop_reg)
...
> - return tmp & 0xFF;
> + return tmp;
> +}
...
> +
> +/**
> + * octeon_i2c_read_sw - read lower bits of an I2C core register
> + * @i2c: The struct octeon_i2c
> + * @eop_reg: Register selector
> + *
> + * Returns the data.
> + *
> + * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
> + */
> +static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
> +{
> + return octeon_i2c_read_sw64(i2c, eop_reg);
> }
This is not a cleanup!
> +/* disable the CORE interrupt */
> static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
> {
> - octeon_i2c_write_int(i2c, 0);
> + /* clear TS/ST/IFLG events */
> + octeon_i2c_write_int(i2c, TS_INT | ST_INT);
> }
Isn't this a functional change?
> /**
> - * octeon_i2c_unblock - unblock the bus.
> - * @i2c: The struct octeon_i2c.
> + * bitbang_unblock - unblock the bus
> + * @i2c: The struct octeon_i2c
> *
> - * If there was a reset while a device was driving 0 to bus,
> - * bus is blocked. We toggle it free manually by some clock
> - * cycles and send a stop.
> + * If there was a reset while a device was driving 0 to bus, bus is blocked.
> + * We toggle it free manually by some clock cycles and send a stop.
> */
> -static void octeon_i2c_unblock(struct octeon_i2c *i2c)
> +static void bitbang_unblock(struct octeon_i2c *i2c)
I dunno understand the change of the function name. However, this should
be refactored to use the i2c_bus_recovery infrastructure anyhow.
> - result = wait_event_timeout(i2c->queue,
> - octeon_i2c_test_iflg(i2c),
> - i2c->adap.timeout);
> -
> + result = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
> + i2c->adap.timeout);
You could rename this variable to 'time_left' to make the code even
easier to read.
> static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
> - const u8 *data, int length)
> + u8 *data, int length)
Why this change?
> {
> - int i, result;
> + int result, i;
And this?
> -static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
> - u8 *data, int length)
> +static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
> + u16 *rlength)
> {
> + int length = *rlength;
And this?
> @@ -353,15 +411,14 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
> if (result)
> return result;
>
> - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
> - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
> -
> + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, TWSI_CTL_ENAB);
Is this really the same?
> static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
> @@ -435,13 +490,10 @@ static struct i2c_adapter octeon_i2c_ops = {
> .owner = THIS_MODULE,
> .name = "OCTEON adapter",
> .algo = &octeon_i2c_algo,
> - .timeout = HZ / 50,
This is a functional change, or?
> - i2c->twsi_phys = res_mem->start;
> - i2c->regsize = resource_size(res_mem);
Those are removed which is okay in general, but should be in a seperate
patch.
This patch was hard to review because so many changes were overlapping.
It really should have been broken out. Like one patch only removing the
trailing "." in the kernel-doc. One fixing the indentation issues. One
removing the now superfluous fields in struct octeon_i2c, etc...
Wolfram
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v2 01/10] i2c-octeon: Cleanup i2c-octeon driver
2016-03-05 18:47 ` Wolfram Sang
@ 2016-03-06 13:00 ` Jan Glauber
2016-03-06 14:35 ` Wolfram Sang
0 siblings, 1 reply; 14+ messages in thread
From: Jan Glauber @ 2016-03-06 13:00 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-kernel, linux-i2c, David Daney
On Sat, Mar 05, 2016 at 07:47:31PM +0100, Wolfram Sang wrote:
> Hi Jan,
>
> The description is not enough. A list what kind of changes you applied
> would be nice.
OK.
> I'd like to have these checkpatch issues fixed:
>
> ERROR: trailing statements should be on next line
> #177: FILE: drivers/i2c/busses/i2c-octeon.c:133:
> + while ((tmp & SW_TWSI_V) != 0);
>
> ERROR: trailing statements should be on next line
> #202: FILE: drivers/i2c/busses/i2c-octeon.c:152:
> + while ((tmp & SW_TWSI_V) != 0);
Fixed. Strange that checkpatch.pl -f (use on file) does not report these
errors though.
> CHECK: Prefer using the BIT_ULL macro
> #52: FILE: drivers/i2c/busses/i2c-octeon.c:39:
> +#define SW_TWSI_V (1ULL << 63)
OK
> Note: I don't care so much about the 80 char limit as long as the line
> length is not too excessive.
Fine, same opinion here. I'll try to limit the 80 char changes to a
sane minimum then.
>
> > -#define DRV_NAME "i2c-octeon"
> > +#define DRV_NAME "i2c-octeon"
>
> I'm in favor for indenting register and bit defines, but other than that
> I think one space is enough. I won't force my opinion on you, though.
> Just wanted to let you know.
OK
> > +#define INT_ENA_ST 0x1
> > +#define INT_ENA_TS 0x2
> > +#define INT_ENA_CORE 0x4
>
> I assume those are bits? Then, they shouldn't be in the registers
> section.
I'll move them to the thunderx patch.
> > +/* TWSI_INT values */
> > +#define ST_INT 0x01
> > +#define TS_INT 0x02
> > +#define CORE_INT 0x04
> > +#define ST_EN 0x10
> > +#define TS_EN 0x20
> > +#define CORE_EN 0x40
> > +#define SDA_OVR 0x100
> > +#define SCL_OVR 0x200
> > +#define SDA 0x400
> > +#define SCL 0x800
>
> I think those should have a prefix. SDA and SCL are dangerously generic.
Agreed, I'll make these TWSI_INT_*.
> > struct octeon_i2c {
> > - wait_queue_head_t queue;
> > - struct i2c_adapter adap;
> > - int irq;
> > - u32 twsi_freq;
> > - int sys_freq;
> > - resource_size_t twsi_phys;
> > - void __iomem *twsi_base;
> > - resource_size_t regsize;
> > - struct device *dev;
> > + wait_queue_head_t queue;
> > + struct i2c_adapter adap;
> > + int irq;
> > + u32 twsi_freq;
> > + int sys_freq;
> > + void __iomem *twsi_base;
> > + struct device *dev;
>
> NAK. structs change often, and then one needs to fix the whole
> indentation. One space is enough here.
Not sure I understand your argument. I find this form more readable
but I can change that to one space.
> > };
>
> > -static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
> > +static u64 octeon_i2c_read_sw64(struct octeon_i2c *i2c, u64 eop_reg)
> ...
> > - return tmp & 0xFF;
> > + return tmp;
> > +}
> ...
> > +
> > +/**
> > + * octeon_i2c_read_sw - read lower bits of an I2C core register
> > + * @i2c: The struct octeon_i2c
> > + * @eop_reg: Register selector
> > + *
> > + * Returns the data.
> > + *
> > + * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
> > + */
> > +static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
> > +{
> > + return octeon_i2c_read_sw64(i2c, eop_reg);
> > }
>
> This is not a cleanup!
OK, I'll move that to the patch where it's used.
> > +/* disable the CORE interrupt */
> > static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
> > {
> > - octeon_i2c_write_int(i2c, 0);
> > + /* clear TS/ST/IFLG events */
> > + octeon_i2c_write_int(i2c, TS_INT | ST_INT);
> > }
>
> Isn't this a functional change?
Looks like a bug, I'll drop that.
> > /**
> > - * octeon_i2c_unblock - unblock the bus.
> > - * @i2c: The struct octeon_i2c.
> > + * bitbang_unblock - unblock the bus
> > + * @i2c: The struct octeon_i2c
> > *
> > - * If there was a reset while a device was driving 0 to bus,
> > - * bus is blocked. We toggle it free manually by some clock
> > - * cycles and send a stop.
> > + * If there was a reset while a device was driving 0 to bus, bus is blocked.
> > + * We toggle it free manually by some clock cycles and send a stop.
> > */
> > -static void octeon_i2c_unblock(struct octeon_i2c *i2c)
> > +static void bitbang_unblock(struct octeon_i2c *i2c)
>
> I dunno understand the change of the function name. However, this should
> be refactored to use the i2c_bus_recovery infrastructure anyhow.
I'll leave the function name as it is. Would it be possbile to address
the refactoring in a follow-up patch after this series is finished?
> > - result = wait_event_timeout(i2c->queue,
> > - octeon_i2c_test_iflg(i2c),
> > - i2c->adap.timeout);
> > -
> > + result = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
> > + i2c->adap.timeout);
>
> You could rename this variable to 'time_left' to make the code even
> easier to read.
Agreed.
> > static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
> > - const u8 *data, int length)
> > + u8 *data, int length)
>
> Why this change?
>
> > {
> > - int i, result;
> > + int result, i;
>
> And this?
I'll drop these two, just noise from merging back and forth.
> > -static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
> > - u8 *data, int length)
> > +static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
> > + u16 *rlength)
> > {
> > + int length = *rlength;
>
> And this?
I'll move this to the patch where it's used.
> > @@ -353,15 +411,14 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
> > if (result)
> > return result;
> >
> > - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
> > - octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
> > -
> > + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, TWSI_CTL_ENAB);
>
> Is this really the same?
I'll move this to a later patch.
> > static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
> > @@ -435,13 +490,10 @@ static struct i2c_adapter octeon_i2c_ops = {
> > .owner = THIS_MODULE,
> > .name = "OCTEON adapter",
> > .algo = &octeon_i2c_algo,
> > - .timeout = HZ / 50,
>
> This is a functional change, or?
Hmm, it isn't for arm64 (HZ 250) but it would be for MIPS (HZ 100). I'll make it
a seperate patch then.
> > - i2c->twsi_phys = res_mem->start;
> > - i2c->regsize = resource_size(res_mem);
>
> Those are removed which is okay in general, but should be in a seperate
> patch.
OK
> This patch was hard to review because so many changes were overlapping.
> It really should have been broken out. Like one patch only removing the
> trailing "." in the kernel-doc. One fixing the indentation issues. One
> removing the now superfluous fields in struct octeon_i2c, etc...
I'll split it into several patches then.
Thanks for reviewing,
Jan
> Wolfram
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v2 01/10] i2c-octeon: Cleanup i2c-octeon driver
2016-03-06 13:00 ` Jan Glauber
@ 2016-03-06 14:35 ` Wolfram Sang
0 siblings, 0 replies; 14+ messages in thread
From: Wolfram Sang @ 2016-03-06 14:35 UTC (permalink / raw)
To: Jan Glauber; +Cc: linux-kernel, linux-i2c, David Daney
[-- Attachment #1: Type: text/plain, Size: 1475 bytes --]
> Fixed. Strange that checkpatch.pl -f (use on file) does not report these
> errors though.
Huh, indeed.
> > > struct octeon_i2c {
> > > - wait_queue_head_t queue;
> > > - struct i2c_adapter adap;
> > > - int irq;
> > > - u32 twsi_freq;
> > > - int sys_freq;
> > > - resource_size_t twsi_phys;
> > > - void __iomem *twsi_base;
> > > - resource_size_t regsize;
> > > - struct device *dev;
> > > + wait_queue_head_t queue;
> > > + struct i2c_adapter adap;
> > > + int irq;
> > > + u32 twsi_freq;
> > > + int sys_freq;
> > > + void __iomem *twsi_base;
> > > + struct device *dev;
> >
> > NAK. structs change often, and then one needs to fix the whole
> > indentation. One space is enough here.
>
> Not sure I understand your argument. I find this form more readable
> but I can change that to one space.
a) it spoils git history and makes harder to find out which patch
added which member of the struct
b) patches get harder to read when the indentation of the whole
struct changes. New members are not always put at the end.
> > I dunno understand the change of the function name. However, this should
> > be refactored to use the i2c_bus_recovery infrastructure anyhow.
>
> I'll leave the function name as it is. Would it be possbile to address
> the refactoring in a follow-up patch after this series is finished?
Yes, that makes sense.
> I'll split it into several patches then.
Sounds good. Thanks!
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 02/10] i2c-octeon: Support I2C_M_RECV_LEN
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
2016-03-04 17:57 ` [PATCH v2 01/10] i2c-octeon: Cleanup i2c-octeon driver Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-04 17:57 ` [PATCH v2 03/10] i2c-octeon: Enable high-level controller and improve on bus contention Jan Glauber
` (7 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-kernel, linux-i2c, David Daney, Jan Glauber
From: David Daney <ddaney@caviumnetworks.com>
If I2C_M_RECV_LEN is set consider the length byte.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
---
drivers/i2c/busses/i2c-octeon.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 1f14094..fa4d439 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -392,13 +392,14 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
* @target: Target address
* @data: Pointer to the location to store the data
* @rlength: Length of the data
+ * @recv_len: flag for length byte
*
* The address is sent over the bus, then the data is read.
*
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
- u16 *rlength)
+ u16 *rlength, bool recv_len)
{
int length = *rlength;
int i, result;
@@ -438,6 +439,15 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
return result;
data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
+ if (recv_len && i == 0) {
+ if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) {
+ dev_err(i2c->dev,
+ "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n",
+ __func__, data[i]);
+ return -EIO;
+ }
+ length += data[i];
+ }
}
*rlength = length;
return 0;
@@ -466,7 +476,8 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
pmsg->len, pmsg->addr, i + 1, num);
if (pmsg->flags & I2C_M_RD)
ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
- &pmsg->len);
+ &pmsg->len,
+ pmsg->flags & I2C_M_RECV_LEN);
else
ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
pmsg->len);
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 03/10] i2c-octeon: Enable high-level controller and improve on bus contention
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
2016-03-04 17:57 ` [PATCH v2 01/10] i2c-octeon: Cleanup i2c-octeon driver Jan Glauber
2016-03-04 17:57 ` [PATCH v2 02/10] i2c-octeon: Support I2C_M_RECV_LEN Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-04 17:57 ` [PATCH v2 04/10] dt-bindings: i2c: add Octeon cn78xx TWSI Jan Glauber
` (6 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-kernel, linux-i2c, David Daney, Jan Glauber
From: David Daney <ddaney@caviumnetworks.com>
Use High Level Controller when possible.
i2c-octeon was reacting badly to bus contention: when in
direct-access mode (for transfers > 8 bytes, which cannot use the
high-level controller) some !ACK or arbitration-loss states were
not causing the current transfer to be aborted, and the bus released.
There's one place in i2c protocol that !ACK is an acceptable
response: in the final byte of a read cycle. In this case the
destination is not saying that the transfer failed, just that it
doesn't want more data.
This enables correct behavior of ACK on final byte of non-final read
msgs too.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
---
drivers/i2c/busses/i2c-octeon.c | 583 ++++++++++++++++++++++++++++++++++------
1 file changed, 504 insertions(+), 79 deletions(-)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index fa4d439..d48456a 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -113,8 +113,15 @@ struct octeon_i2c {
int sys_freq;
void __iomem *twsi_base;
struct device *dev;
+ bool hlc_enabled;
};
+static int reset_how;
+
+static int timeout = 2;
+module_param(timeout, int, 0444);
+MODULE_PARM_DESC(timeout, "Low-level device timeout (ms)");
+
/**
* octeon_i2c_write_sw - write an I2C core register
* @i2c: The struct octeon_i2c
@@ -123,7 +130,7 @@ struct octeon_i2c {
*
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
*/
-static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
+static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u32 data)
{
u64 tmp;
@@ -165,7 +172,7 @@ static u64 octeon_i2c_read_sw64(struct octeon_i2c *i2c, u64 eop_reg)
*/
static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
{
- return octeon_i2c_read_sw64(i2c, eop_reg);
+ return (u8) octeon_i2c_read_sw64(i2c, eop_reg);
}
/**
@@ -198,6 +205,15 @@ static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
octeon_i2c_write_int(i2c, TS_INT | ST_INT);
}
+static void octeon_i2c_disable_hlc(struct octeon_i2c *i2c)
+{
+ if (!i2c->hlc_enabled)
+ return;
+
+ i2c->hlc_enabled = false;
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+}
+
/**
* bitbang_unblock - unblock the bus
* @i2c: The struct octeon_i2c
@@ -207,13 +223,18 @@ static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
*/
static void bitbang_unblock(struct octeon_i2c *i2c)
{
- int i;
+ int state, i;
+ octeon_i2c_disable_hlc(i2c);
dev_dbg(i2c->dev, "%s\n", __func__);
+ /* cycle 8+1 clocks with SDA high */
for (i = 0; i < 9; i++) {
octeon_i2c_write_int(i2c, 0);
udelay(5);
+ state = __raw_readq(i2c->twsi_base + TWSI_INT);
+ if (state & (SDA | SCL))
+ break;
octeon_i2c_write_int(i2c, SCL_OVR);
udelay(5);
}
@@ -236,10 +257,14 @@ static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static u64 octeon_i2c_read_ctl(struct octeon_i2c *i2c)
+{
+ return octeon_i2c_read_sw64(i2c, SW_TWSI_EOP_TWSI_CTL);
+}
+
static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
{
- return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL)
- & TWSI_CTL_IFLG) != 0;
+ return (octeon_i2c_read_ctl(i2c) & TWSI_CTL_IFLG) != 0;
}
/**
@@ -263,76 +288,208 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
return 0;
}
-/* send STOP to the bus */
-static void octeon_i2c_stop(struct octeon_i2c *i2c)
+/*
+ * Cleanup low-level state & enable high-level.
+ *
+ * Returns -EAGAIN if low-level state could not be cleaned
+ */
+static int octeon_i2c_enable_hlc(struct octeon_i2c *i2c)
{
- u8 data;
+ int try = 0, ret = 0;
+ u64 val;
+
+ if (i2c->hlc_enabled)
+ return 0;
+ else
+ i2c->hlc_enabled = true;
+
+ while (1) {
+ val = octeon_i2c_read_ctl(i2c) & (TWSI_CTL_STA | TWSI_CTL_STP);
+ if (!val)
+ break;
+
+ /* clear _IFLG event */
+ if (val & TWSI_CTL_IFLG)
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB);
+
+ if (try++ > 100) {
+ pr_err("%s: giving up\n", __func__);
+ ret = -EAGAIN;
+ break;
+ }
+
+ /* spin until any start/stop has finished */
+ udelay(10);
+ }
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STP);
+ TWSI_CTL_CE | TWSI_CTL_AAK | TWSI_CTL_ENAB);
+ return ret;
+}
- data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+static int octeon_i2c_lost_arb(u8 code, int final_read)
+{
+ switch (code) {
+ /* Arbitration lost */
+ case STAT_LOST_ARB_38:
+ case STAT_LOST_ARB_68:
+ case STAT_LOST_ARB_78:
+ case STAT_LOST_ARB_B0:
+ return -EAGAIN;
+
+ /* Being addressed as slave, should back off & listen */
+ case STAT_SLAVE_60:
+ case STAT_SLAVE_70:
+ case STAT_GENDATA_ACK:
+ case STAT_GENDATA_NAK:
+ return -EIO;
+
+ /* Core busy as slave */
+ case STAT_SLAVE_80:
+ case STAT_SLAVE_88:
+ case STAT_SLAVE_A0:
+ case STAT_SLAVE_A8:
+ case STAT_SLAVE_LOST:
+ case STAT_SLAVE_NAK:
+ case STAT_SLAVE_ACK:
+ return -EIO;
+
+ /* ACK allowed on pre-terminal bytes only */
+ case STAT_RXDATA_ACK:
+ if (!final_read)
+ return 0;
+ return -EAGAIN;
- if (data != STAT_IDLE)
- dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data);
+ /* NAK allowed on terminal byte only */
+ case STAT_RXDATA_NAK:
+ if (final_read)
+ return 0;
+ return -EAGAIN;
+ case STAT_TXDATA_NAK:
+ case STAT_TXADDR_NAK:
+ case STAT_RXADDR_NAK:
+ case STAT_AD2W_NAK:
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+static int check_arb(struct octeon_i2c *i2c, int final_read)
+{
+ return octeon_i2c_lost_arb(octeon_i2c_read_sw(i2c,
+ SW_TWSI_EOP_TWSI_STAT), final_read);
+}
+
+/* send STOP to the bus */
+static void octeon_i2c_stop(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STP);
}
static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
{
- u8 status;
+ u8 status = 0;
int tries;
- /* disable high level controller, enable bus access */
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
-
/* reset controller */
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
- for (tries = 10; tries; tries--) {
+ for (tries = 10; tries && status != STAT_IDLE; tries--) {
udelay(1);
status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
- if (status == STAT_IDLE)
- return 0;
}
- dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
- return -EIO;
+
+ if (status != STAT_IDLE) {
+ dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+
+ /* toggle twice to force both teardowns */
+ octeon_i2c_enable_hlc(i2c);
+ octeon_i2c_disable_hlc(i2c);
+ return 0;
+}
+
+/*
+ * TWSI state seems stuck. Not sure if it's TWSI-engine state or something
+ * else on bus. The initial _stop() is always harmless, it just resets state
+ * machine, does not _transmit_ STOP unless engine was active.
+ */
+static int start_unstick(struct octeon_i2c *i2c)
+{
+ octeon_i2c_stop(i2c);
+
+ /*
+ * Response is escalated over successive calls,
+ * as EAGAIN provokes retries from i2c/core.
+ */
+ switch (reset_how++ % 4) {
+ case 0:
+ /* just the stop above */
+ break;
+ case 1:
+ /*
+ * Controller refused to send start flag. May be a
+ * client is holding SDA low? Let's try to free it.
+ */
+ bitbang_unblock(i2c);
+ break;
+ case 2:
+ /* re-init our TWSI hardware */
+ octeon_i2c_initlowlevel(i2c);
+ break;
+ default:
+ /* retry in caller */
+ reset_how = 0;
+ return -EAGAIN;
+ }
+ return 0;
}
/**
* octeon_i2c_start - send START to the bus
* @i2c: The struct octeon_i2c
+ * @first: first msg in combined operation?
*
* Returns 0 on success, otherwise a negative errno.
*/
-static int octeon_i2c_start(struct octeon_i2c *i2c)
+static int octeon_i2c_start(struct octeon_i2c *i2c, int first)
{
int result;
u8 data;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STA);
+ octeon_i2c_disable_hlc(i2c);
- result = octeon_i2c_wait(i2c);
- if (result) {
- if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) {
- /*
- * Controller refused to send start flag May
- * be a client is holding SDA low - let's try
- * to free it.
- */
- bitbang_unblock(i2c);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STA);
- result = octeon_i2c_wait(i2c);
- }
- if (result)
- return result;
- }
+ while (1) {
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STA);
- data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
- if ((data != STAT_START) && (data != STAT_RSTART)) {
- dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data);
- return -EIO;
+ result = octeon_i2c_wait(i2c);
+ data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
+ switch (data) {
+ case STAT_START:
+ case STAT_RSTART:
+ if (!first)
+ return -EAGAIN;
+ reset_how = 0;
+ return 0;
+ case STAT_RXADDR_ACK:
+ if (first)
+ return -EAGAIN;
+ return start_unstick(i2c);
+ /*
+ * case STAT_IDLE:
+ * case STAT_ERROR:
+ */
+ default:
+ if (!first)
+ return -EAGAIN;
+ start_unstick(i2c);
+ }
}
return 0;
}
@@ -343,18 +500,18 @@ static int octeon_i2c_start(struct octeon_i2c *i2c)
* @target: Target address
* @data: Pointer to the data to be sent
* @length: Length of the data
+ * @last: is last msg in combined operation?
*
* The address is sent over the bus, then the data.
*
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
- u8 *data, int length)
+ u8 *data, int length, int first, int last)
{
int result, i;
- u8 tmp;
- result = octeon_i2c_start(i2c);
+ result = octeon_i2c_start(i2c, first);
if (result)
return result;
@@ -366,14 +523,9 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
return result;
for (i = 0; i < length; i++) {
- tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
-
- if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
- dev_err(i2c->dev,
- "%s: bad status before write (0x%x)\n",
- __func__, tmp);
- return -EIO;
- }
+ result = check_arb(i2c, false);
+ if (result)
+ return result;
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]);
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
@@ -381,6 +533,9 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
result = octeon_i2c_wait(i2c);
if (result)
return result;
+ result = check_arb(i2c, false);
+ if (result)
+ return result;
}
return 0;
@@ -392,6 +547,7 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
* @target: Target address
* @data: Pointer to the location to store the data
* @rlength: Length of the data
+ * @phase: which phase of a combined operation.
* @recv_len: flag for length byte
*
* The address is sent over the bus, then the data is read.
@@ -399,8 +555,9 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
- u16 *rlength, bool recv_len)
+ u16 *rlength, bool first, bool last, bool recv_len)
{
+ u8 ctl = TWSI_CTL_ENAB | TWSI_CTL_AAK;
int length = *rlength;
int i, result;
u8 tmp;
@@ -408,37 +565,34 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
if (length < 1)
return -EINVAL;
- result = octeon_i2c_start(i2c);
+ result = octeon_i2c_start(i2c, first);
if (result)
return result;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, TWSI_CTL_ENAB);
- result = octeon_i2c_wait(i2c);
- if (result)
- return result;
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
- for (i = 0; i < length; i++) {
+ for (i = 0; i < length; ) {
tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ result = octeon_i2c_lost_arb(tmp, !(ctl & TWSI_CTL_AAK));
+ if (result)
+ return result;
- if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
- dev_err(i2c->dev,
- "%s: bad status before read (0x%x)\n",
- __func__, tmp);
- return -EIO;
+ switch (tmp) {
+ case STAT_RXDATA_ACK:
+ case STAT_RXDATA_NAK:
+ data[i++] = octeon_i2c_read_sw(i2c,
+ SW_TWSI_EOP_TWSI_DATA);
}
- if (i + 1 < length)
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_AAK);
- else
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB);
+ /* NAK last recv'd byte, as a no-more-please */
+ if (last && i == length - 1)
+ ctl &= ~TWSI_CTL_AAK;
+ /* clr iflg to allow next event */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, ctl);
result = octeon_i2c_wait(i2c);
if (result)
return result;
-
- data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
if (recv_len && i == 0) {
if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) {
dev_err(i2c->dev,
@@ -453,6 +607,253 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
return 0;
}
+static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c)
+{
+ u64 val = __raw_readq(i2c->twsi_base + SW_TWSI);
+
+ return (val & SW_TWSI_V) == 0;
+}
+
+static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, ST_EN);
+}
+
+static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
+{
+ /* clear ST/TS events, listen for neither */
+ octeon_i2c_write_int(i2c, ST_INT | TS_INT);
+}
+
+/**
+ * octeon_i2c_hlc_wait - wait for an HLC operation to complete
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
+{
+ int result;
+
+ octeon_i2c_hlc_int_enable(i2c);
+ result = wait_event_interruptible_timeout(i2c->queue,
+ octeon_i2c_hlc_test_ready(i2c),
+ i2c->adap.timeout);
+ octeon_i2c_int_disable(i2c);
+ if (!result)
+ octeon_i2c_hlc_int_clear(i2c);
+
+ if (result < 0) {
+ dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__);
+ return result;
+ } else if (!result) {
+ dev_dbg(i2c->dev, "%s: timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/* high-level-controller pure read of up to 8 bytes */
+static int octeon_i2c_simple_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_enable_hlc(i2c);
+ cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64) (msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10;
+ else
+ cmd |= SW_TWSI_OP_7;
+
+ octeon_i2c_hlc_int_clear(i2c);
+ __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
+ msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
+
+ if (msgs[0].len > 4) {
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+ for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
+ msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
+ }
+
+err:
+ return ret;
+}
+
+/* high-level-controller pure write of up to 8 bytes */
+static int octeon_i2c_simple_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_enable_hlc(i2c);
+ octeon_i2c_hlc_int_clear(i2c);
+
+ ret = check_arb(i2c, false);
+ if (ret)
+ goto err;
+
+ cmd = SW_TWSI_V | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64) (msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10;
+ else
+ cmd |= SW_TWSI_OP_7;
+
+ for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
+ cmd |= (u64)msgs[0].buf[j] << (8 * i);
+
+ if (msgs[0].len > 4) {
+ u64 ext = 0;
+
+ for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
+ ext |= (u64) msgs[0].buf[j] << (8 * i);
+ __raw_writeq(ext, i2c->twsi_base + SW_TWSI_EXT);
+ }
+
+ __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ ret = check_arb(i2c, false);
+
+err:
+ return ret;
+}
+
+/* high-level-controller composite write+read, msg0=addr, msg1=data */
+static int octeon_i2c_ia_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_enable_hlc(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10_IA;
+ else
+ cmd |= SW_TWSI_OP_7_IA;
+
+ if (msgs[0].len == 2) {
+ u64 ext = 0;
+
+ cmd |= SW_TWSI_EIA;
+ ext = (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ cmd |= (u64) msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+ __raw_writeq(ext, i2c->twsi_base + SW_TWSI_EXT);
+ } else
+ cmd |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+
+ octeon_i2c_hlc_int_clear(i2c);
+ __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
+ msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
+
+ if (msgs[1].len > 4) {
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+ for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
+ msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
+ }
+
+err:
+ return ret;
+}
+
+/* high-level-controller composite write+write, m[0]len<=2, m[1]len<=8 */
+static int octeon_i2c_ia_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ bool set_ext = false;
+ int i, j, ret = 0;
+ u64 cmd, ext = 0;
+
+ octeon_i2c_enable_hlc(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64) (msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10_IA;
+ else
+ cmd |= SW_TWSI_OP_7_IA;
+
+ if (msgs[0].len == 2) {
+ cmd |= SW_TWSI_EIA;
+ ext |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ set_ext = true;
+ cmd |= (u64) msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+ } else
+ cmd |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+
+ for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
+ cmd |= (u64) msgs[1].buf[j] << (8 * i);
+
+ if (msgs[1].len > 4) {
+ for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
+ ext |= (u64)msgs[1].buf[j] << (8 * i);
+ set_ext = true;
+ }
+ if (set_ext)
+ __raw_writeq(ext, i2c->twsi_base + SW_TWSI_EXT);
+
+ octeon_i2c_hlc_int_clear(i2c);
+ __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = octeon_i2c_read_sw64(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+ ret = octeon_i2c_lost_arb(cmd, false);
+
+err:
+ return ret;
+}
+
/**
* octeon_i2c_xfer - The driver's master_xfer function
* @adap: Pointer to the i2c_adapter structure
@@ -467,8 +868,31 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
int i, ret = 0;
+ if (num == 1) {
+ if (msgs[0].len > 0 && msgs[0].len <= 8) {
+ if (msgs[0].flags & I2C_M_RD)
+ ret = octeon_i2c_simple_read(i2c, msgs);
+ else
+ ret = octeon_i2c_simple_write(i2c, msgs);
+ goto out;
+ }
+ } else if (num == 2) {
+ if ((msgs[0].flags & I2C_M_RD) == 0 &&
+ (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
+ msgs[0].len > 0 && msgs[0].len <= 2 &&
+ msgs[1].len > 0 && msgs[1].len <= 8 &&
+ msgs[0].addr == msgs[1].addr) {
+ if (msgs[1].flags & I2C_M_RD)
+ ret = octeon_i2c_ia_read(i2c, msgs);
+ else
+ ret = octeon_i2c_ia_write(i2c, msgs);
+ goto out;
+ }
+ }
+
for (i = 0; ret == 0 && i < num; i++) {
struct i2c_msg *pmsg = &msgs[i];
+ bool last = (i == (num - 1));
dev_dbg(i2c->dev,
"Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
@@ -476,14 +900,14 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
pmsg->len, pmsg->addr, i + 1, num);
if (pmsg->flags & I2C_M_RD)
ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
- &pmsg->len,
+ &pmsg->len, !i, last,
pmsg->flags & I2C_M_RECV_LEN);
else
ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
- pmsg->len);
+ pmsg->len, !i, last);
}
octeon_i2c_stop(i2c);
-
+out:
return ret ? -EAGAIN : num;
}
@@ -614,7 +1038,8 @@ static int octeon_i2c_probe(struct platform_device *pdev)
octeon_i2c_setclock(i2c);
i2c->adap = octeon_i2c_ops;
- i2c->adap.timeout = msecs_to_jiffies(50);
+ i2c->adap.timeout = msecs_to_jiffies(timeout);
+ i2c->adap.retries = 10;
i2c->adap.dev.parent = &pdev->dev;
i2c->adap.dev.of_node = node;
i2c_set_adapdata(&i2c->adap, i2c);
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 04/10] dt-bindings: i2c: add Octeon cn78xx TWSI
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
` (2 preceding siblings ...)
2016-03-04 17:57 ` [PATCH v2 03/10] i2c-octeon: Enable high-level controller and improve on bus contention Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-04 17:57 ` [PATCH v2 05/10] i2c-octeon: Add support for cn78XX chips Jan Glauber
` (5 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang
Cc: linux-kernel, linux-i2c, David Daney, Jan Glauber, Rob Herring,
Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala
Add compatible string for Cavium Octeon cn78XX SOCs TWSI.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
---
Documentation/devicetree/bindings/i2c/i2c-octeon.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
index dced82e..872d485 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
@@ -4,6 +4,12 @@
Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+ or
+
+ compatible: "cavium,octeon-7890-twsi"
+
+ Compatibility with cn78XX SOCs.
+
- reg: The base address of the TWSI/I2C bus controller register bank.
- #address-cells: Must be <1>.
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 05/10] i2c-octeon: Add support for cn78XX chips
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
` (3 preceding siblings ...)
2016-03-04 17:57 ` [PATCH v2 04/10] dt-bindings: i2c: add Octeon cn78xx TWSI Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-04 17:57 ` [PATCH v2 06/10] i2c-octeon: Flush TWSI writes with readback Jan Glauber
` (4 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-kernel, linux-i2c, David Daney, Jan Glauber
From: David Daney <ddaney@caviumnetworks.com>
cn78XX has a different interrupt architecture, so we have to manage
the interrupts differently.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
---
drivers/i2c/busses/i2c-octeon.c | 156 ++++++++++++++++++++++++++++++++++------
1 file changed, 136 insertions(+), 20 deletions(-)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index d48456a..0b28d8c 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -15,6 +15,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/atomic.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/slab.h>
@@ -109,11 +110,18 @@ struct octeon_i2c {
wait_queue_head_t queue;
struct i2c_adapter adap;
int irq;
+ int hlc_irq; /* For cn7890 only */
u32 twsi_freq;
int sys_freq;
void __iomem *twsi_base;
struct device *dev;
bool hlc_enabled;
+ void (*int_en) (struct octeon_i2c *);
+ void (*int_dis) (struct octeon_i2c *);
+ void (*hlc_int_en) (struct octeon_i2c *);
+ void (*hlc_int_dis) (struct octeon_i2c *);
+ atomic_t int_en_cnt;
+ atomic_t hlc_int_en_cnt;
};
static int reset_how;
@@ -215,6 +223,58 @@ static void octeon_i2c_disable_hlc(struct octeon_i2c *i2c)
}
/**
+ * octeon_i2c_int_enable78 - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
+{
+ atomic_inc_return(&i2c->int_en_cnt);
+ enable_irq(i2c->irq);
+}
+
+static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
+{
+ int count;
+
+ /*
+ * The interrupt can be disabled in two places, but we only
+ * want to make the disable_irq_nosync() call once, so keep
+ * track with the atomic variable.
+ */
+ count = atomic_dec_if_positive(cnt);
+ if (count >= 0)
+ disable_irq_nosync(irq);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
+{
+ __octeon_i2c_irq_disable(&i2c->int_en_cnt, i2c->irq);
+}
+
+/**
+ * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
+{
+ atomic_inc_return(&i2c->hlc_int_en_cnt);
+ enable_irq(i2c->hlc_irq);
+}
+
+/* disable the ST interrupt */
+static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
+{
+ __octeon_i2c_irq_disable(&i2c->hlc_int_en_cnt, i2c->hlc_irq);
+}
+
+/**
* bitbang_unblock - unblock the bus
* @i2c: The struct octeon_i2c
*
@@ -251,7 +311,18 @@ static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
{
struct octeon_i2c *i2c = dev_id;
- octeon_i2c_int_disable(i2c);
+ i2c->int_dis(i2c);
+ wake_up(&i2c->queue);
+
+ return IRQ_HANDLED;
+}
+
+/* interrupt service routine */
+static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
+{
+ struct octeon_i2c *i2c = dev_id;
+
+ i2c->hlc_int_dis(i2c);
wake_up(&i2c->queue);
return IRQ_HANDLED;
@@ -277,10 +348,10 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
{
long result;
- octeon_i2c_int_enable(i2c);
+ i2c->int_en(i2c);
result = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
i2c->adap.timeout);
- octeon_i2c_int_disable(i2c);
+ i2c->int_dis(i2c);
if (!result) {
dev_dbg(i2c->dev, "%s: timeout\n", __func__);
return -ETIMEDOUT;
@@ -300,8 +371,8 @@ static int octeon_i2c_enable_hlc(struct octeon_i2c *i2c)
if (i2c->hlc_enabled)
return 0;
- else
- i2c->hlc_enabled = true;
+
+ i2c->hlc_enabled = true;
while (1) {
val = octeon_i2c_read_ctl(i2c) & (TWSI_CTL_STA | TWSI_CTL_STP);
@@ -635,11 +706,10 @@ static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
{
int result;
- octeon_i2c_hlc_int_enable(i2c);
+ i2c->hlc_int_en(i2c);
result = wait_event_interruptible_timeout(i2c->queue,
- octeon_i2c_hlc_test_ready(i2c),
- i2c->adap.timeout);
- octeon_i2c_int_disable(i2c);
+ octeon_i2c_hlc_test_ready(i2c), i2c->adap.timeout);
+ i2c->hlc_int_dis(i2c);
if (!result)
octeon_i2c_hlc_int_clear(i2c);
@@ -972,14 +1042,26 @@ static void octeon_i2c_setclock(struct octeon_i2c *i2c)
static int octeon_i2c_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
- int irq, result = 0;
+ int irq, hlc_irq = 0, result = 0;
struct resource *res_mem;
struct octeon_i2c *i2c;
-
- /* All adaptors have an irq. */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ bool cn78xx_style;
+
+ cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
+ if (cn78xx_style) {
+ hlc_irq = platform_get_irq(pdev, 0);
+ if (hlc_irq < 0)
+ return hlc_irq;
+
+ irq = platform_get_irq(pdev, 2);
+ if (irq < 0)
+ return irq;
+ } else {
+ /* All adaptors have an irq. */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ }
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c) {
@@ -1022,11 +1104,44 @@ static int octeon_i2c_probe(struct platform_device *pdev)
init_waitqueue_head(&i2c->queue);
i2c->irq = irq;
- result = devm_request_irq(&pdev->dev, i2c->irq,
- octeon_i2c_isr, 0, DRV_NAME, i2c);
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto out;
+ if (cn78xx_style) {
+ i2c->hlc_irq = hlc_irq;
+
+ i2c->int_en = octeon_i2c_int_enable78;
+ i2c->int_dis = octeon_i2c_int_disable78;
+ i2c->hlc_int_en = octeon_i2c_hlc_int_enable78;
+ i2c->hlc_int_dis = octeon_i2c_hlc_int_disable78;
+
+ irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
+ irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
+
+ result = devm_request_irq(&pdev->dev, i2c->irq,
+ octeon_i2c_isr, 0, DRV_NAME, i2c);
+
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
+ result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
+ octeon_i2c_hlc_isr78, 0,
+ DRV_NAME, i2c);
+
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
+ } else {
+ i2c->int_en = octeon_i2c_int_enable;
+ i2c->int_dis = octeon_i2c_int_disable;
+ i2c->hlc_int_en = octeon_i2c_hlc_int_enable;
+ i2c->hlc_int_dis = octeon_i2c_int_disable;
+
+ result = devm_request_irq(&pdev->dev, i2c->irq,
+ octeon_i2c_isr, 0, DRV_NAME, i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
}
result = octeon_i2c_initlowlevel(i2c);
@@ -1067,6 +1182,7 @@ static int octeon_i2c_remove(struct platform_device *pdev)
static const struct of_device_id octeon_i2c_match[] = {
{ .compatible = "cavium,octeon-3860-twsi", },
+ { .compatible = "cavium,octeon-7890-twsi", },
{},
};
MODULE_DEVICE_TABLE(of, octeon_i2c_match);
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 06/10] i2c-octeon: Flush TWSI writes with readback
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
` (4 preceding siblings ...)
2016-03-04 17:57 ` [PATCH v2 05/10] i2c-octeon: Add support for cn78XX chips Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-04 17:57 ` [PATCH v2 07/10] i2c-octeon: Faster operation when IFLG signals late Jan Glauber
` (3 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang
Cc: linux-kernel, linux-i2c, David Daney, Peter Swain, Jan Glauber
From: Peter Swain <pswain@cavium.com>
Signed-off-by: Peter Swain <pswain@cavium.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
---
drivers/i2c/busses/i2c-octeon.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 0b28d8c..bb15a9c 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -130,6 +130,12 @@ static int timeout = 2;
module_param(timeout, int, 0444);
MODULE_PARM_DESC(timeout, "Low-level device timeout (ms)");
+static void writeqflush(u64 val, void __iomem *addr)
+{
+ __raw_writeq(val, addr);
+ __raw_readq(addr); /* wait for write to land */
+}
+
/**
* octeon_i2c_write_sw - write an I2C core register
* @i2c: The struct octeon_i2c
@@ -190,8 +196,7 @@ static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
*/
static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
{
- __raw_writeq(data, i2c->twsi_base + TWSI_INT);
- __raw_readq(i2c->twsi_base + TWSI_INT);
+ writeqflush(data, i2c->twsi_base + TWSI_INT);
}
/**
@@ -797,10 +802,10 @@ static int octeon_i2c_simple_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
ext |= (u64) msgs[0].buf[j] << (8 * i);
- __raw_writeq(ext, i2c->twsi_base + SW_TWSI_EXT);
+ writeqflush(ext, i2c->twsi_base + SW_TWSI_EXT);
}
- __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
+ writeqflush(cmd, i2c->twsi_base + SW_TWSI);
ret = octeon_i2c_hlc_wait(i2c);
if (ret)
@@ -846,7 +851,7 @@ static int octeon_i2c_ia_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
cmd |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
octeon_i2c_hlc_int_clear(i2c);
- __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
+ writeqflush(cmd, i2c->twsi_base + SW_TWSI);
ret = octeon_i2c_hlc_wait(i2c);
if (ret)
@@ -906,10 +911,10 @@ static int octeon_i2c_ia_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
set_ext = true;
}
if (set_ext)
- __raw_writeq(ext, i2c->twsi_base + SW_TWSI_EXT);
+ writeqflush(ext, i2c->twsi_base + SW_TWSI_EXT);
octeon_i2c_hlc_int_clear(i2c);
- __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
+ writeqflush(cmd, i2c->twsi_base + SW_TWSI);
ret = octeon_i2c_hlc_wait(i2c);
if (ret)
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 07/10] i2c-octeon: Faster operation when IFLG signals late
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
` (5 preceding siblings ...)
2016-03-04 17:57 ` [PATCH v2 06/10] i2c-octeon: Flush TWSI writes with readback Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-04 17:57 ` [PATCH v2 08/10] i2c-octeon: Add workaround for chips with broken irqs Jan Glauber
` (2 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang
Cc: linux-kernel, linux-i2c, David Daney, Peter Swain, Jan Glauber
From: Peter Swain <pswain@cavium.com>
Some versions can deliver low-level twsi irq before twsi_ctl.iflg
is set, leading to timeout-driven i/o.
When an irq signals event, but woken task does not see the expected
twsi_ctl.iflg, re-check about 80uS later.
EEPROM reads on 100kHz i2c now measure ~5.2kB/s, about 1/2 what's
achievable, and much better than the worst-case 100 bytes/sec before.
Signed-off-by: Peter Swain <pswain@cavium.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
---
drivers/i2c/busses/i2c-octeon.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index bb15a9c..e3552e5 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -130,6 +130,14 @@ static int timeout = 2;
module_param(timeout, int, 0444);
MODULE_PARM_DESC(timeout, "Low-level device timeout (ms)");
+/*
+ * On some hardware IFLG is not visible in TWSI_CTL until after low-level IRQ,
+ * so re-sample CTL a short time later to avoid stalls.
+ */
+static int irq_early_us = 80;
+module_param(irq_early_us, int, 0644);
+MODULE_PARM_DESC(irq_early_us, "Re-poll for IFLG after IRQ (us)");
+
static void writeqflush(u64 val, void __iomem *addr)
{
__raw_writeq(val, addr);
@@ -343,6 +351,26 @@ static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
return (octeon_i2c_read_ctl(i2c) & TWSI_CTL_IFLG) != 0;
}
+/*
+ * Wait-helper which addresses the delayed-IFLAG problem by re-polling for
+ * missing TWSI_CTL[IFLG] a few us later, when irq has signalled an event,
+ * but none found. Skip this re-poll on the first (non-wakeup) call.
+ */
+static int poll_iflg(struct octeon_i2c *i2c, int *first_p)
+{
+ int iflg = octeon_i2c_test_iflg(i2c);
+
+ if (iflg)
+ return 1;
+ if (*first_p)
+ *first_p = 0;
+ else {
+ usleep_range(irq_early_us, 2 * irq_early_us);
+ iflg = octeon_i2c_test_iflg(i2c);
+ }
+ return iflg;
+}
+
/**
* octeon_i2c_wait - wait for the IFLG to be set
* @i2c: The struct octeon_i2c
@@ -351,10 +379,11 @@ static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
*/
static int octeon_i2c_wait(struct octeon_i2c *i2c)
{
+ int first = 1;
long result;
i2c->int_en(i2c);
- result = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
+ result = wait_event_timeout(i2c->queue, poll_iflg(i2c, &first),
i2c->adap.timeout);
i2c->int_dis(i2c);
if (!result) {
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 08/10] i2c-octeon: Add workaround for chips with broken irqs
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
` (6 preceding siblings ...)
2016-03-04 17:57 ` [PATCH v2 07/10] i2c-octeon: Faster operation when IFLG signals late Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-04 17:57 ` [PATCH v2 09/10] i2c: split i2c-octeon driver and add ThunderX support Jan Glauber
2016-03-04 17:57 ` [PATCH v2 10/10] i2c: thunderx: add smbus support Jan Glauber
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-kernel, linux-i2c, David Daney, Jan Glauber
From: David Daney <ddaney@caviumnetworks.com>
CN3860 does not interrupt the CPU when the i2c status changes. If
we get a timeout, and see the status has in fact changed, we know we
have this problem, and drop back to polling.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
---
drivers/i2c/busses/i2c-octeon.c | 46 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index e3552e5..3c2f848 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -115,6 +115,7 @@ struct octeon_i2c {
int sys_freq;
void __iomem *twsi_base;
struct device *dev;
+ int broken_irq_mode;
bool hlc_enabled;
void (*int_en) (struct octeon_i2c *);
void (*int_dis) (struct octeon_i2c *);
@@ -382,10 +383,33 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
int first = 1;
long result;
+ if (i2c->broken_irq_mode) {
+ /*
+ * Some chip revisions seem to not assert the irq in
+ * the interrupt controller. So we must poll for the
+ * IFLG change.
+ */
+ u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+ while (!octeon_i2c_test_iflg(i2c) &&
+ time_before64(get_jiffies_64(), end))
+ udelay(50);
+
+ return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
+ }
+
i2c->int_en(i2c);
result = wait_event_timeout(i2c->queue, poll_iflg(i2c, &first),
i2c->adap.timeout);
i2c->int_dis(i2c);
+
+ if (result <= 0 && OCTEON_IS_MODEL(OCTEON_CN38XX) &&
+ octeon_i2c_test_iflg(i2c)) {
+ dev_err(i2c->dev,
+ "broken irq connection detected, switching to polling mode.\n");
+ i2c->broken_irq_mode = 1;
+ return 0;
+ }
if (!result) {
dev_dbg(i2c->dev, "%s: timeout\n", __func__);
return -ETIMEDOUT;
@@ -740,6 +764,21 @@ static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
{
int result;
+ if (i2c->broken_irq_mode) {
+ /*
+ * Some cn38xx boards did not assert the irq in
+ * the interrupt controller. So we must poll for the
+ * IFLG change.
+ */
+ u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+ while (!octeon_i2c_hlc_test_ready(i2c) &&
+ time_before64(get_jiffies_64(), end))
+ udelay(50);
+
+ return octeon_i2c_hlc_test_ready(i2c) ? 0 : -ETIMEDOUT;
+ }
+
i2c->hlc_int_en(i2c);
result = wait_event_interruptible_timeout(i2c->queue,
octeon_i2c_hlc_test_ready(i2c), i2c->adap.timeout);
@@ -747,6 +786,13 @@ static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
if (!result)
octeon_i2c_hlc_int_clear(i2c);
+ if (result <= 0 && OCTEON_IS_MODEL(OCTEON_CN38XX) &&
+ octeon_i2c_hlc_test_ready(i2c)) {
+ dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
+ i2c->broken_irq_mode = 1;
+ return 0;
+ }
+
if (result < 0) {
dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__);
return result;
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 09/10] i2c: split i2c-octeon driver and add ThunderX support
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
` (7 preceding siblings ...)
2016-03-04 17:57 ` [PATCH v2 08/10] i2c-octeon: Add workaround for chips with broken irqs Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
2016-03-04 17:57 ` [PATCH v2 10/10] i2c: thunderx: add smbus support Jan Glauber
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-kernel, linux-i2c, David Daney, Jan Glauber
The ThunderX SOC uses the same i2c block as the Octeon SOC.
The main difference is that on ThunderX the device is a PCI device
so device probing is done via PCI.
Split the current Octeon driver into an Octeon and a common part
and add the ThunderX support.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
---
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 3 +
drivers/i2c/busses/i2c-cavium.c | 828 +++++++++++++++++++++
drivers/i2c/busses/i2c-cavium.h | 185 +++++
drivers/i2c/busses/i2c-octeon-core.c | 302 ++++++++
drivers/i2c/busses/i2c-octeon.c | 1283 --------------------------------
drivers/i2c/busses/i2c-thunderx-core.c | 266 +++++++
7 files changed, 1594 insertions(+), 1283 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-cavium.c
create mode 100644 drivers/i2c/busses/i2c-cavium.h
create mode 100644 drivers/i2c/busses/i2c-octeon-core.c
delete mode 100644 drivers/i2c/busses/i2c-octeon.c
create mode 100644 drivers/i2c/busses/i2c-thunderx-core.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 7b0aa82..6069401 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -952,6 +952,16 @@ config I2C_OCTEON
This driver can also be built as a module. If so, the module
will be called i2c-octeon.
+config I2C_THUNDERX
+ tristate "Cavium ThunderX I2C bus support"
+ depends on 64BIT && PCI && !CAVIUM_OCTEON_SOC
+ help
+ Say yes if you want to support the I2C serial bus on Cavium
+ ThunderX SOC.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-thunderx.
+
config I2C_XILINX
tristate "Xilinx I2C Controller"
depends on HAS_IOMEM
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 37f2819..a32ff14 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -91,7 +91,10 @@ obj-$(CONFIG_I2C_UNIPHIER) += i2c-uniphier.o
obj-$(CONFIG_I2C_UNIPHIER_F) += i2c-uniphier-f.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_WMT) += i2c-wmt.o
+i2c-octeon-objs := i2c-cavium.o i2c-octeon-core.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
+i2c-thunderx-objs := i2c-cavium.o i2c-thunderx-core.o
+obj-$(CONFIG_I2C_THUNDERX) += i2c-thunderx.o
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o
diff --git a/drivers/i2c/busses/i2c-cavium.c b/drivers/i2c/busses/i2c-cavium.c
new file mode 100644
index 0000000..93d8c0f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cavium.c
@@ -0,0 +1,828 @@
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
+ *
+ * This file contains the shared part of the driver for the i2c adapter in
+ * Cavium Networks' OCTEON processors and ThunderX SOCs.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "i2c-cavium.h"
+
+static int reset_how;
+
+/*
+ * On some hardware IFLG is not visible in TWSI_CTL until after low-level IRQ,
+ * so re-sample CTL a short time later to avoid stalls.
+ */
+static int irq_early_us = 80;
+module_param(irq_early_us, int, 0644);
+MODULE_PARM_DESC(irq_early_us, "Re-poll for IFLG after IRQ (us)");
+
+static void octeon_i2c_disable_hlc(struct octeon_i2c *i2c)
+{
+ if (!i2c->hlc_enabled)
+ return;
+
+ i2c->hlc_enabled = false;
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+}
+
+/* interrupt service routine */
+irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
+{
+ struct octeon_i2c *i2c = dev_id;
+
+ i2c->int_dis(i2c);
+ wake_up(&i2c->queue);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Wait-helper which addresses the delayed-IFLAG problem by re-polling for
+ * missing TWSI_CTL[IFLG] a few us later, when irq has signalled an event,
+ * but none found. Skip this re-poll on the first (non-wakeup) call.
+ */
+static int poll_iflg(struct octeon_i2c *i2c, int *first_p)
+{
+ int iflg = octeon_i2c_test_iflg(i2c);
+
+ if (iflg)
+ return 1;
+ if (*first_p)
+ *first_p = 0;
+ else {
+ usleep_range(irq_early_us, 2 * irq_early_us);
+ iflg = octeon_i2c_test_iflg(i2c);
+ }
+ return iflg;
+}
+
+/**
+ * octeon_i2c_wait - wait for the IFLG to be set
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_wait(struct octeon_i2c *i2c)
+{
+ int first = 1;
+ long result;
+
+ if (i2c->broken_irq_mode) {
+ /*
+ * Some chip revisions seem to not assert the irq in
+ * the interrupt controller. So we must poll for the
+ * IFLG change.
+ */
+ u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+ while (!octeon_i2c_test_iflg(i2c) &&
+ time_before64(get_jiffies_64(), end))
+ udelay(50);
+
+ return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
+ }
+
+ i2c->int_en(i2c);
+ result = wait_event_timeout(i2c->queue, poll_iflg(i2c, &first),
+ i2c->adap.timeout);
+ i2c->int_dis(i2c);
+
+ if (result <= 0 && i2c->broken_irq_check &&
+ octeon_i2c_test_iflg(i2c)) {
+ dev_err(i2c->dev,
+ "broken irq connection detected, switching to polling mode.\n");
+ i2c->broken_irq_mode = 1;
+ return 0;
+ }
+ if (!result) {
+ dev_dbg(i2c->dev, "%s: timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/*
+ * Cleanup low-level state & enable high-level.
+ *
+ * Returns -EAGAIN if low-level state could not be cleaned
+ */
+static int octeon_i2c_enable_hlc(struct octeon_i2c *i2c)
+{
+ int try = 0, ret = 0;
+ u64 val;
+
+ if (i2c->hlc_enabled)
+ return 0;
+
+ i2c->hlc_enabled = true;
+
+ while (1) {
+ val = octeon_i2c_read_ctl(i2c) & (TWSI_CTL_STA | TWSI_CTL_STP);
+ if (!val)
+ break;
+
+ /* clear _IFLG event */
+ if (val & TWSI_CTL_IFLG)
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB);
+
+ if (try++ > 100) {
+ pr_err("%s: giving up\n", __func__);
+ ret = -EAGAIN;
+ break;
+ }
+
+ /* spin until any start/stop has finished */
+ udelay(10);
+ }
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_CE | TWSI_CTL_AAK | TWSI_CTL_ENAB);
+ return ret;
+}
+
+static int octeon_i2c_lost_arb(u8 code, int final_read)
+{
+ switch (code) {
+ /* Arbitration lost */
+ case STAT_LOST_ARB_38:
+ case STAT_LOST_ARB_68:
+ case STAT_LOST_ARB_78:
+ case STAT_LOST_ARB_B0:
+ return -EAGAIN;
+
+ /* Being addressed as slave, should back off & listen */
+ case STAT_SLAVE_60:
+ case STAT_SLAVE_70:
+ case STAT_GENDATA_ACK:
+ case STAT_GENDATA_NAK:
+ return -EIO;
+
+ /* Core busy as slave */
+ case STAT_SLAVE_80:
+ case STAT_SLAVE_88:
+ case STAT_SLAVE_A0:
+ case STAT_SLAVE_A8:
+ case STAT_SLAVE_LOST:
+ case STAT_SLAVE_NAK:
+ case STAT_SLAVE_ACK:
+ return -EIO;
+
+ /* ACK allowed on pre-terminal bytes only */
+ case STAT_RXDATA_ACK:
+ if (!final_read)
+ return 0;
+ return -EAGAIN;
+
+ /* NAK allowed on terminal byte only */
+ case STAT_RXDATA_NAK:
+ if (final_read)
+ return 0;
+ return -EAGAIN;
+ case STAT_TXDATA_NAK:
+ case STAT_TXADDR_NAK:
+ case STAT_RXADDR_NAK:
+ case STAT_AD2W_NAK:
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+static int octeon_i2c_check_arb(struct octeon_i2c *i2c, int final_read)
+{
+ return octeon_i2c_lost_arb(octeon_i2c_read_sw(i2c,
+ SW_TWSI_EOP_TWSI_STAT), final_read);
+}
+
+/* send STOP to the bus */
+static void octeon_i2c_stop(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STP);
+}
+
+int octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+{
+ u8 status = 0;
+ int tries;
+
+ /* reset controller */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+
+ for (tries = 10; tries && status != STAT_IDLE; tries--) {
+ udelay(1);
+ status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ }
+
+ if (status != STAT_IDLE) {
+ dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+
+ /* toggle twice to force both teardowns */
+ octeon_i2c_enable_hlc(i2c);
+ octeon_i2c_disable_hlc(i2c);
+ return 0;
+}
+
+/**
+ * bitbang_unblock - unblock the bus
+ * @i2c: The struct octeon_i2c
+ *
+ * If there was a reset while a device was driving 0 to bus, bus is blocked.
+ * We toggle it free manually by some clock cycles and send a stop.
+ */
+static void bitbang_unblock(struct octeon_i2c *i2c)
+{
+ int state, i;
+
+ octeon_i2c_disable_hlc(i2c);
+ dev_dbg(i2c->dev, "%s\n", __func__);
+
+ /* cycle 8+1 clocks with SDA high */
+ for (i = 0; i < 9; i++) {
+ octeon_i2c_write_int(i2c, 0);
+ udelay(5);
+ state = __raw_readq(i2c->twsi_base + TWSI_INT);
+ if (state & (SDA | SCL))
+ break;
+ octeon_i2c_write_int(i2c, SCL_OVR);
+ udelay(5);
+ }
+ /* hand-crank a STOP */
+ octeon_i2c_write_int(i2c, SDA_OVR | SCL_OVR);
+ udelay(5);
+ octeon_i2c_write_int(i2c, SDA_OVR);
+ udelay(5);
+ octeon_i2c_write_int(i2c, 0);
+}
+
+/*
+ * TWSI state seems stuck. Not sure if it's TWSI-engine state or something
+ * else on bus. The initial _stop() is always harmless, it just resets state
+ * machine, does not _transmit_ STOP unless engine was active.
+ */
+static int start_unstick(struct octeon_i2c *i2c)
+{
+ octeon_i2c_stop(i2c);
+
+ /*
+ * Response is escalated over successive calls,
+ * as EAGAIN provokes retries from i2c/core.
+ */
+ switch (reset_how++ % 4) {
+ case 0:
+ /* just the stop above */
+ break;
+ case 1:
+ /*
+ * Controller refused to send start flag. May be a
+ * client is holding SDA low? Let's try to free it.
+ */
+ bitbang_unblock(i2c);
+ break;
+ case 2:
+ /* re-init our TWSI hardware */
+ octeon_i2c_initlowlevel(i2c);
+ break;
+ default:
+ /* retry in caller */
+ reset_how = 0;
+ return -EAGAIN;
+ }
+ return 0;
+}
+
+/**
+ * octeon_i2c_start - send START to the bus
+ * @i2c: The struct octeon_i2c
+ * @first: first msg in combined operation?
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_start(struct octeon_i2c *i2c, int first)
+{
+ int result;
+ u8 data;
+
+ octeon_i2c_disable_hlc(i2c);
+
+ while (1) {
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STA);
+
+ result = octeon_i2c_wait(i2c);
+ data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
+ switch (data) {
+ case STAT_START:
+ case STAT_RSTART:
+ if (!first)
+ return -EAGAIN;
+ reset_how = 0;
+ return 0;
+ case STAT_RXADDR_ACK:
+ if (first)
+ return -EAGAIN;
+ return start_unstick(i2c);
+ /*
+ * case STAT_IDLE:
+ * case STAT_ERROR:
+ */
+ default:
+ if (!first)
+ return -EAGAIN;
+ start_unstick(i2c);
+ }
+ }
+ return 0;
+}
+
+/* calculate and set clock divisors */
+void octeon_i2c_setclock(struct octeon_i2c *i2c)
+{
+ int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
+ int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+
+ for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
+ /*
+ * An mdiv value of less than 2 seems to not work well
+ * with ds1337 RTCs, so we constrain it to larger values.
+ */
+ for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
+ /*
+ * For given ndiv and mdiv values check the
+ * two closest thp values.
+ */
+ tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+ tclk *= (1 << ndiv_idx);
+ thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+
+ for (inc = 0; inc <= 1; inc++) {
+ thp_idx = thp_base + inc;
+ if (thp_idx < 5 || thp_idx > 0xff)
+ continue;
+
+ foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+ foscl = foscl / (1 << ndiv_idx);
+ foscl = foscl / (mdiv_idx + 1) / 10;
+ diff = abs(foscl - i2c->twsi_freq);
+ if (diff < delta_hz) {
+ delta_hz = diff;
+ thp = thp_idx;
+ mdiv = mdiv_idx;
+ ndiv = ndiv_idx;
+ }
+ }
+ }
+ }
+ octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+}
+
+static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c)
+{
+ u64 val = __raw_readq(i2c->twsi_base + SW_TWSI);
+
+ return (val & SW_TWSI_V) == 0;
+}
+
+static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
+{
+ /* clear ST/TS events, listen for neither */
+ octeon_i2c_write_int(i2c, ST_INT | TS_INT);
+}
+
+/**
+ * octeon_i2c_hlc_wait - wait for an HLC operation to complete
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
+{
+ int result;
+
+ if (i2c->broken_irq_mode) {
+ /*
+ * Some cn38xx boards did not assert the irq in
+ * the interrupt controller. So we must poll for the
+ * IFLG change.
+ */
+ u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+ while (!octeon_i2c_hlc_test_ready(i2c) &&
+ time_before64(get_jiffies_64(), end))
+ udelay(50);
+
+ return octeon_i2c_hlc_test_ready(i2c) ? 0 : -ETIMEDOUT;
+ }
+
+ i2c->hlc_int_en(i2c);
+ result = wait_event_interruptible_timeout(i2c->queue,
+ octeon_i2c_hlc_test_ready(i2c), i2c->adap.timeout);
+ i2c->hlc_int_dis(i2c);
+ if (!result)
+ octeon_i2c_hlc_int_clear(i2c);
+
+ if (result <= 0 && i2c->broken_irq_check &&
+ octeon_i2c_hlc_test_ready(i2c)) {
+ dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
+ i2c->broken_irq_mode = 1;
+ return 0;
+ }
+
+ if (result < 0) {
+ dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__);
+ return result;
+ } else if (!result) {
+ dev_dbg(i2c->dev, "%s: timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/**
+ * octeon_i2c_read - receive data from the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the location to store the data
+ * @rlength: Length of the data
+ * @phase: which phase of a combined operation.
+ * @recv_len: flag for length byte
+ *
+ * The address is sent over the bus, then the data is read.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
+ u16 *rlength, bool first, bool last, bool recv_len)
+{
+ u8 ctl = TWSI_CTL_ENAB | TWSI_CTL_AAK;
+ int length = *rlength;
+ int i, result;
+ u8 tmp;
+
+ if (length < 1)
+ return -EINVAL;
+
+ result = octeon_i2c_start(i2c, first);
+ if (result)
+ return result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
+
+ for (i = 0; i < length; ) {
+ tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ result = octeon_i2c_lost_arb(tmp, !(ctl & TWSI_CTL_AAK));
+ if (result)
+ return result;
+
+ switch (tmp) {
+ case STAT_RXDATA_ACK:
+ case STAT_RXDATA_NAK:
+ data[i++] = octeon_i2c_read_sw(i2c,
+ SW_TWSI_EOP_TWSI_DATA);
+ }
+
+ /* NAK last recv'd byte, as a no-more-please */
+ if (last && i == length - 1)
+ ctl &= ~TWSI_CTL_AAK;
+
+ /* clr iflg to allow next event */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, ctl);
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+ if (recv_len && i == 0) {
+ if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) {
+ dev_err(i2c->dev,
+ "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n",
+ __func__, data[i]);
+ return -EIO;
+ }
+ length += data[i];
+ }
+ }
+ *rlength = length;
+ return 0;
+}
+
+/**
+ * octeon_i2c_write - send data to the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the data to be sent
+ * @length: Length of the data
+ * @last: is last msg in combined operation?
+ *
+ * The address is sent over the bus, then the data.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
+ u8 *data, int length, int first, int last)
+{
+ int result, i;
+
+ result = octeon_i2c_start(i2c, first);
+ if (result)
+ return result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ for (i = 0; i < length; i++) {
+ result = octeon_i2c_check_arb(i2c, false);
+ if (result)
+ return result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+ result = octeon_i2c_check_arb(i2c, false);
+ if (result)
+ return result;
+ }
+
+ return 0;
+}
+
+/* high-level-controller pure read of up to 8 bytes */
+static int octeon_i2c_simple_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_enable_hlc(i2c);
+ cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64) (msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10;
+ else
+ cmd |= SW_TWSI_OP_7;
+
+ octeon_i2c_hlc_int_clear(i2c);
+ __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
+ msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
+
+ if (msgs[0].len > 4) {
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+ for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
+ msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
+ }
+
+err:
+ return ret;
+}
+
+/* high-level-controller pure write of up to 8 bytes */
+static int octeon_i2c_simple_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_enable_hlc(i2c);
+ octeon_i2c_hlc_int_clear(i2c);
+
+ ret = octeon_i2c_check_arb(i2c, false);
+ if (ret)
+ goto err;
+
+ cmd = SW_TWSI_V | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64) (msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10;
+ else
+ cmd |= SW_TWSI_OP_7;
+
+ for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
+ cmd |= (u64)msgs[0].buf[j] << (8 * i);
+
+ if (msgs[0].len > 4) {
+ u64 ext = 0;
+
+ for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
+ ext |= (u64) msgs[0].buf[j] << (8 * i);
+ writeqflush(ext, i2c->twsi_base + SW_TWSI_EXT);
+ }
+
+ writeqflush(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ ret = octeon_i2c_check_arb(i2c, false);
+
+err:
+ return ret;
+}
+
+/* high-level-controller composite write+read, msg0=addr, msg1=data */
+static int octeon_i2c_ia_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_enable_hlc(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10_IA;
+ else
+ cmd |= SW_TWSI_OP_7_IA;
+
+ if (msgs[0].len == 2) {
+ u64 ext = 0;
+
+ cmd |= SW_TWSI_EIA;
+ ext = (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ cmd |= (u64) msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+ __raw_writeq(ext, i2c->twsi_base + SW_TWSI_EXT);
+ } else
+ cmd |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+
+ octeon_i2c_hlc_int_clear(i2c);
+ writeqflush(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
+ msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
+
+ if (msgs[1].len > 4) {
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+ for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
+ msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
+ }
+
+err:
+ return ret;
+}
+
+/* high-level-controller composite write+write, m[0]len<=2, m[1]len<=8 */
+static int octeon_i2c_ia_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ bool set_ext = false;
+ int i, j, ret = 0;
+ u64 cmd, ext = 0;
+
+ octeon_i2c_enable_hlc(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64) (msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10_IA;
+ else
+ cmd |= SW_TWSI_OP_7_IA;
+
+ if (msgs[0].len == 2) {
+ cmd |= SW_TWSI_EIA;
+ ext |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ set_ext = true;
+ cmd |= (u64) msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+ } else
+ cmd |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+
+ for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
+ cmd |= (u64) msgs[1].buf[j] << (8 * i);
+
+ if (msgs[1].len > 4) {
+ for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
+ ext |= (u64)msgs[1].buf[j] << (8 * i);
+ set_ext = true;
+ }
+ if (set_ext)
+ writeqflush(ext, i2c->twsi_base + SW_TWSI_EXT);
+
+ octeon_i2c_hlc_int_clear(i2c);
+ writeqflush(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = octeon_i2c_read_sw64(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+ ret = octeon_i2c_lost_arb(cmd, false);
+
+err:
+ return ret;
+}
+
+/**
+ * octeon_i2c_xfer - The driver's master_xfer function
+ * @adap: Pointer to the i2c_adapter structure
+ * @msgs: Pointer to the messages to be processed
+ * @num: Length of the MSGS array
+ *
+ * Returns the number of messages processed, or a negative errno on failure.
+ */
+int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+ int i, ret = 0;
+
+ if (num == 1) {
+ if (msgs[0].len > 0 && msgs[0].len <= 8) {
+ if (msgs[0].flags & I2C_M_RD)
+ ret = octeon_i2c_simple_read(i2c, msgs);
+ else
+ ret = octeon_i2c_simple_write(i2c, msgs);
+ goto out;
+ }
+ } else if (num == 2) {
+ if ((msgs[0].flags & I2C_M_RD) == 0 &&
+ (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
+ msgs[0].len > 0 && msgs[0].len <= 2 &&
+ msgs[1].len > 0 && msgs[1].len <= 8 &&
+ msgs[0].addr == msgs[1].addr) {
+ if (msgs[1].flags & I2C_M_RD)
+ ret = octeon_i2c_ia_read(i2c, msgs);
+ else
+ ret = octeon_i2c_ia_write(i2c, msgs);
+ goto out;
+ }
+ }
+
+ for (i = 0; ret == 0 && i < num; i++) {
+ struct i2c_msg *pmsg = &msgs[i];
+ bool last = (i == (num - 1));
+
+ dev_dbg(i2c->dev,
+ "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
+ pmsg->flags & I2C_M_RD ? "read" : "write",
+ pmsg->len, pmsg->addr, i + 1, num);
+ if (pmsg->flags & I2C_M_RD)
+ ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
+ &pmsg->len, !i, last,
+ pmsg->flags & I2C_M_RECV_LEN);
+ else
+ ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
+ pmsg->len, !i, last);
+ }
+ octeon_i2c_stop(i2c);
+out:
+ return ret ? -EAGAIN : num;
+}
diff --git a/drivers/i2c/busses/i2c-cavium.h b/drivers/i2c/busses/i2c-cavium.h
new file mode 100644
index 0000000..aadd4f5
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cavium.h
@@ -0,0 +1,185 @@
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+/* Register offsets */
+#if IS_ENABLED(CONFIG_I2C_THUNDERX)
+ #define SW_TWSI 0x1000
+ #define TWSI_INT 0x1010
+ #define SW_TWSI_EXT 0x1018
+#else
+ #define SW_TWSI 0x00
+ #define TWSI_INT 0x10
+ #define SW_TWSI_EXT 0x18
+#endif
+
+#define INT_ENA_ST 0x1
+#define INT_ENA_TS 0x2
+#define INT_ENA_CORE 0x4
+
+/* Controller command patterns */
+#define SW_TWSI_V (1ULL << 63)
+#define SW_TWSI_EIA (1ULL << 61)
+#define SW_TWSI_R (1ULL << 56)
+#define SW_TWSI_SOVR (1ULL << 55)
+#define SW_TWSI_OP_7 (0ULL << 57)
+#define SW_TWSI_OP_7_IA (1ULL << 57)
+#define SW_TWSI_OP_10 (2ULL << 57)
+#define SW_TWSI_OP_10_IA (3ULL << 57)
+#define SW_TWSI_OP_TWSI_CLK (1ULL << 59)
+#define SW_TWSI_SIZE_SHIFT 52
+#define SW_TWSI_A_SHIFT 40
+#define SW_TWSI_IA_SHIFT 32
+#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ULL
+#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ULL
+#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ULL
+#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ULL
+#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ULL
+
+/* Controller command and status bits */
+#define TWSI_CTL_CE 0x80 /* High level controller enable */
+#define TWSI_CTL_ENAB 0x40 /* Bus enable */
+#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */
+#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */
+#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
+#define TWSI_CTL_AAK 0x04 /* Assert ACK */
+
+/* Some status values */
+#define STAT_ERROR 0x00
+#define STAT_START 0x08
+#define STAT_RSTART 0x10
+#define STAT_TXADDR_ACK 0x18
+#define STAT_TXADDR_NAK 0x20
+#define STAT_TXDATA_ACK 0x28
+#define STAT_TXDATA_NAK 0x30
+#define STAT_LOST_ARB_38 0x38
+#define STAT_RXADDR_ACK 0x40
+#define STAT_RXADDR_NAK 0x48
+#define STAT_RXDATA_ACK 0x50
+#define STAT_RXDATA_NAK 0x58
+#define STAT_SLAVE_60 0x60
+#define STAT_LOST_ARB_68 0x68
+#define STAT_SLAVE_70 0x70
+#define STAT_LOST_ARB_78 0x78
+#define STAT_SLAVE_80 0x80
+#define STAT_SLAVE_88 0x88
+#define STAT_GENDATA_ACK 0x90
+#define STAT_GENDATA_NAK 0x98
+#define STAT_SLAVE_A0 0xA0
+#define STAT_SLAVE_A8 0xA8
+#define STAT_LOST_ARB_B0 0xB0
+#define STAT_SLAVE_LOST 0xB8
+#define STAT_SLAVE_NAK 0xC0
+#define STAT_SLAVE_ACK 0xC8
+#define STAT_AD2W_ACK 0xD0
+#define STAT_AD2W_NAK 0xD8
+#define STAT_IDLE 0xF8
+
+/* TWSI_INT values */
+#define ST_INT 0x01
+#define TS_INT 0x02
+#define CORE_INT 0x04
+#define ST_EN 0x10
+#define TS_EN 0x20
+#define CORE_EN 0x40
+#define SDA_OVR 0x100
+#define SCL_OVR 0x200
+#define SDA 0x400
+#define SCL 0x800
+
+struct octeon_i2c {
+ wait_queue_head_t queue;
+ struct i2c_adapter adap;
+ struct clk *clk;
+ int irq;
+ int hlc_irq; /* For cn7890 only */
+ u32 twsi_freq;
+ int sys_freq;
+ void __iomem *twsi_base;
+ struct device *dev;
+ int broken_irq_check;
+ int broken_irq_mode;
+ bool hlc_enabled;
+
+ void (*int_en) (struct octeon_i2c *);
+ void (*int_dis) (struct octeon_i2c *);
+ void (*hlc_int_en) (struct octeon_i2c *);
+ void (*hlc_int_dis) (struct octeon_i2c *);
+
+ atomic_t int_en_cnt;
+ atomic_t hlc_int_en_cnt;
+
+#if IS_ENABLED(CONFIG_I2C_THUNDERX)
+ struct msix_entry i2c_msix;
+#endif
+};
+
+static inline void writeqflush(u64 val, void __iomem *addr)
+{
+ __raw_writeq(val, addr);
+ __raw_readq(addr); /* wait for write to land */
+}
+
+static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+{
+ writeqflush(data, i2c->twsi_base + TWSI_INT);
+}
+
+/*
+ * Write an I2C core register. Access is indirect via the SW_TWSI CSR.
+ */
+static inline void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg,
+ u32 data)
+{
+ u64 tmp;
+
+ __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
+ do
+ tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
+ while ((tmp & SW_TWSI_V) != 0);
+}
+
+/*
+ * Read an I2C core register. Access is indirect via the SW_TWSI CSR.
+ */
+static inline u64 octeon_i2c_read_sw64(struct octeon_i2c *i2c, u64 eop_reg)
+{
+ u64 tmp;
+
+ __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
+ do
+ tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
+ while ((tmp & SW_TWSI_V) != 0);
+
+ return tmp;
+}
+
+/*
+ * Read the lower bits of an I2C core register.
+ * Access is indirect via the SW_TWSI CSR.
+ */
+static inline u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
+{
+ return (u8) octeon_i2c_read_sw64(i2c, eop_reg);
+}
+
+static inline u64 octeon_i2c_read_ctl(struct octeon_i2c *i2c)
+{
+ return octeon_i2c_read_sw64(i2c, SW_TWSI_EOP_TWSI_CTL);
+}
+
+static inline int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
+{
+ return (octeon_i2c_read_ctl(i2c) & TWSI_CTL_IFLG) != 0;
+}
+
+/* Prototypes */
+int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
+irqreturn_t octeon_i2c_isr(int irq, void *dev_id);
+int octeon_i2c_initlowlevel(struct octeon_i2c *i2c);
+void octeon_i2c_setclock(struct octeon_i2c *i2c);
diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c
new file mode 100644
index 0000000..f8228cf
--- /dev/null
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@@ -0,0 +1,302 @@
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
+ *
+ * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <asm/octeon/octeon.h>
+#include "i2c-cavium.h"
+
+#define DRV_NAME "i2c-octeon"
+
+static int timeout = 2;
+module_param(timeout, int, 0444);
+MODULE_PARM_DESC(timeout, "Low-level device timeout (ms)");
+
+/**
+ * octeon_i2c_int_enable - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, CORE_EN);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
+{
+ /* clear TS/ST/IFLG events */
+ octeon_i2c_write_int(i2c, TS_INT | ST_INT);
+}
+
+/**
+ * octeon_i2c_int_enable78 - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
+{
+ atomic_inc_return(&i2c->int_en_cnt);
+ enable_irq(i2c->irq);
+}
+
+static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
+{
+ int count;
+
+ /*
+ * The interrupt can be disabled in two places, but we only
+ * want to make the disable_irq_nosync() call once, so keep
+ * track with the atomic variable.
+ */
+ count = atomic_dec_if_positive(cnt);
+ if (count >= 0)
+ disable_irq_nosync(irq);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
+{
+ __octeon_i2c_irq_disable(&i2c->int_en_cnt, i2c->irq);
+}
+
+/**
+ * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
+{
+ atomic_inc_return(&i2c->hlc_int_en_cnt);
+ enable_irq(i2c->hlc_irq);
+}
+
+/* disable the ST interrupt */
+static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
+{
+ __octeon_i2c_irq_disable(&i2c->hlc_int_en_cnt, i2c->hlc_irq);
+}
+
+/* interrupt service routine */
+static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
+{
+ struct octeon_i2c *i2c = dev_id;
+
+ i2c->hlc_int_dis(i2c);
+ wake_up(&i2c->queue);
+
+ return IRQ_HANDLED;
+}
+
+static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, ST_EN);
+}
+
+static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm octeon_i2c_algo = {
+ .master_xfer = octeon_i2c_xfer,
+ .functionality = octeon_i2c_functionality,
+};
+
+static struct i2c_adapter octeon_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "OCTEON adapter",
+ .algo = &octeon_i2c_algo,
+};
+
+static int octeon_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ int irq, hlc_irq = 0, result = 0;
+ struct resource *res_mem;
+ struct octeon_i2c *i2c;
+ bool cn78xx_style;
+
+ cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
+ if (cn78xx_style) {
+ hlc_irq = platform_get_irq(pdev, 0);
+ if (hlc_irq < 0)
+ return hlc_irq;
+
+ irq = platform_get_irq(pdev, 2);
+ if (irq < 0)
+ return irq;
+ } else {
+ /* All adaptors have an irq. */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ }
+
+ i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c) {
+ result = -ENOMEM;
+ goto out;
+ }
+ i2c->dev = &pdev->dev;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (res_mem == NULL) {
+ dev_err(i2c->dev, "found no memory resource\n");
+ result = -ENXIO;
+ goto out;
+ }
+
+ /*
+ * "clock-rate" is a legacy binding, the official binding is
+ * "clock-frequency". Try the official one first and then
+ * fall back if it doesn't exist.
+ */
+ if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
+ of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
+ dev_err(i2c->dev,
+ "no I2C 'clock-rate' or 'clock-frequency' property\n");
+ result = -ENXIO;
+ goto out;
+ }
+
+ i2c->sys_freq = octeon_get_io_clock_rate();
+
+ if (!devm_request_mem_region(&pdev->dev, res_mem->start,
+ resource_size(res_mem), res_mem->name)) {
+ dev_err(i2c->dev, "request_mem_region failed\n");
+ goto out;
+ }
+
+ i2c->twsi_base = devm_ioremap(&pdev->dev, res_mem->start,
+ resource_size(res_mem));
+ init_waitqueue_head(&i2c->queue);
+ i2c->irq = irq;
+
+ if (cn78xx_style) {
+ i2c->hlc_irq = hlc_irq;
+
+ i2c->int_en = octeon_i2c_int_enable78;
+ i2c->int_dis = octeon_i2c_int_disable78;
+ i2c->hlc_int_en = octeon_i2c_hlc_int_enable78;
+ i2c->hlc_int_dis = octeon_i2c_hlc_int_disable78;
+
+ irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
+ irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
+
+ result = devm_request_irq(&pdev->dev, i2c->irq,
+ octeon_i2c_isr, 0, DRV_NAME, i2c);
+
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
+ result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
+ octeon_i2c_hlc_isr78, 0,
+ DRV_NAME, i2c);
+
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
+ } else {
+ i2c->int_en = octeon_i2c_int_enable;
+ i2c->int_dis = octeon_i2c_int_disable;
+ i2c->hlc_int_en = octeon_i2c_hlc_int_enable;
+ i2c->hlc_int_dis = octeon_i2c_int_disable;
+
+ result = devm_request_irq(&pdev->dev, i2c->irq,
+ octeon_i2c_isr, 0, DRV_NAME, i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
+ }
+
+ if (OCTEON_IS_MODEL(OCTEON_CN38XX))
+ i2c->broken_irq_check = 1;
+
+ result = octeon_i2c_initlowlevel(i2c);
+ if (result) {
+ dev_err(i2c->dev, "init low level failed\n");
+ goto out;
+ }
+
+ octeon_i2c_setclock(i2c);
+
+ i2c->adap = octeon_i2c_ops;
+ i2c->adap.timeout = msecs_to_jiffies(timeout);
+ i2c->adap.retries = 10;
+ i2c->adap.dev.parent = &pdev->dev;
+ i2c->adap.dev.of_node = node;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ platform_set_drvdata(pdev, i2c);
+
+ result = i2c_add_adapter(&i2c->adap);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to add adapter\n");
+ goto out;
+ }
+ dev_info(i2c->dev, "probed\n");
+ return 0;
+
+out:
+ return result;
+};
+
+static int octeon_i2c_remove(struct platform_device *pdev)
+{
+ struct octeon_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ return 0;
+};
+
+static const struct of_device_id octeon_i2c_match[] = {
+ { .compatible = "cavium,octeon-3860-twsi", },
+ { .compatible = "cavium,octeon-7890-twsi", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, octeon_i2c_match);
+
+static struct platform_driver octeon_i2c_driver = {
+ .probe = octeon_i2c_probe,
+ .remove = octeon_i2c_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = octeon_i2c_match,
+ },
+};
+
+module_platform_driver(octeon_i2c_driver);
+
+MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
deleted file mode 100644
index 3c2f848..0000000
--- a/drivers/i2c/busses/i2c-octeon.c
+++ /dev/null
@@ -1,1283 +0,0 @@
-/*
- * (C) Copyright 2009-2010
- * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
- *
- * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
- *
- * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/atomic.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/of.h>
-
-#include <asm/octeon/octeon.h>
-
-#define DRV_NAME "i2c-octeon"
-
-/* Register offsets */
-#define SW_TWSI 0x00
-#define TWSI_INT 0x10
-#define SW_TWSI_EXT 0x18
-
-#define INT_ENA_ST 0x1
-#define INT_ENA_TS 0x2
-#define INT_ENA_CORE 0x4
-
-/* Controller command patterns */
-#define SW_TWSI_V (1ULL << 63)
-#define SW_TWSI_EIA (1ULL << 61)
-#define SW_TWSI_R (1ULL << 56)
-#define SW_TWSI_SOVR (1ULL << 55)
-#define SW_TWSI_OP_7 (0ULL << 57)
-#define SW_TWSI_OP_7_IA (1ULL << 57)
-#define SW_TWSI_OP_10 (2ULL << 57)
-#define SW_TWSI_OP_10_IA (3ULL << 57)
-#define SW_TWSI_OP_TWSI_CLK (1ULL << 59)
-#define SW_TWSI_SIZE_SHIFT 52
-#define SW_TWSI_A_SHIFT 40
-#define SW_TWSI_IA_SHIFT 32
-#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ULL
-#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ULL
-#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ULL
-#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ULL
-#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ULL
-
-/* Controller command and status bits */
-#define TWSI_CTL_CE 0x80 /* High level controller enable */
-#define TWSI_CTL_ENAB 0x40 /* Bus enable */
-#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */
-#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */
-#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
-#define TWSI_CTL_AAK 0x04 /* Assert ACK */
-
-/* Some status values */
-#define STAT_ERROR 0x00
-#define STAT_START 0x08
-#define STAT_RSTART 0x10
-#define STAT_TXADDR_ACK 0x18
-#define STAT_TXADDR_NAK 0x20
-#define STAT_TXDATA_ACK 0x28
-#define STAT_TXDATA_NAK 0x30
-#define STAT_LOST_ARB_38 0x38
-#define STAT_RXADDR_ACK 0x40
-#define STAT_RXADDR_NAK 0x48
-#define STAT_RXDATA_ACK 0x50
-#define STAT_RXDATA_NAK 0x58
-#define STAT_SLAVE_60 0x60
-#define STAT_LOST_ARB_68 0x68
-#define STAT_SLAVE_70 0x70
-#define STAT_LOST_ARB_78 0x78
-#define STAT_SLAVE_80 0x80
-#define STAT_SLAVE_88 0x88
-#define STAT_GENDATA_ACK 0x90
-#define STAT_GENDATA_NAK 0x98
-#define STAT_SLAVE_A0 0xA0
-#define STAT_SLAVE_A8 0xA8
-#define STAT_LOST_ARB_B0 0xB0
-#define STAT_SLAVE_LOST 0xB8
-#define STAT_SLAVE_NAK 0xC0
-#define STAT_SLAVE_ACK 0xC8
-#define STAT_AD2W_ACK 0xD0
-#define STAT_AD2W_NAK 0xD8
-#define STAT_IDLE 0xF8
-
-/* TWSI_INT values */
-#define ST_INT 0x01
-#define TS_INT 0x02
-#define CORE_INT 0x04
-#define ST_EN 0x10
-#define TS_EN 0x20
-#define CORE_EN 0x40
-#define SDA_OVR 0x100
-#define SCL_OVR 0x200
-#define SDA 0x400
-#define SCL 0x800
-
-struct octeon_i2c {
- wait_queue_head_t queue;
- struct i2c_adapter adap;
- int irq;
- int hlc_irq; /* For cn7890 only */
- u32 twsi_freq;
- int sys_freq;
- void __iomem *twsi_base;
- struct device *dev;
- int broken_irq_mode;
- bool hlc_enabled;
- void (*int_en) (struct octeon_i2c *);
- void (*int_dis) (struct octeon_i2c *);
- void (*hlc_int_en) (struct octeon_i2c *);
- void (*hlc_int_dis) (struct octeon_i2c *);
- atomic_t int_en_cnt;
- atomic_t hlc_int_en_cnt;
-};
-
-static int reset_how;
-
-static int timeout = 2;
-module_param(timeout, int, 0444);
-MODULE_PARM_DESC(timeout, "Low-level device timeout (ms)");
-
-/*
- * On some hardware IFLG is not visible in TWSI_CTL until after low-level IRQ,
- * so re-sample CTL a short time later to avoid stalls.
- */
-static int irq_early_us = 80;
-module_param(irq_early_us, int, 0644);
-MODULE_PARM_DESC(irq_early_us, "Re-poll for IFLG after IRQ (us)");
-
-static void writeqflush(u64 val, void __iomem *addr)
-{
- __raw_writeq(val, addr);
- __raw_readq(addr); /* wait for write to land */
-}
-
-/**
- * octeon_i2c_write_sw - write an I2C core register
- * @i2c: The struct octeon_i2c
- * @eop_reg: Register selector
- * @data: Value to be written
- *
- * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
- */
-static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u32 data)
-{
- u64 tmp;
-
- __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
- do
- tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
- while ((tmp & SW_TWSI_V) != 0);
-}
-
-/**
- * octeon_i2c_read_sw64 - read an I2C core register
- * @i2c: The struct octeon_i2c
- * @eop_reg: Register selector
- *
- * Returns the data.
- *
- * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
- */
-static u64 octeon_i2c_read_sw64(struct octeon_i2c *i2c, u64 eop_reg)
-{
- u64 tmp;
-
- __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
- do
- tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
- while ((tmp & SW_TWSI_V) != 0);
-
- return tmp;
-}
-
-/**
- * octeon_i2c_read_sw - read lower bits of an I2C core register
- * @i2c: The struct octeon_i2c
- * @eop_reg: Register selector
- *
- * Returns the data.
- *
- * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
- */
-static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
-{
- return (u8) octeon_i2c_read_sw64(i2c, eop_reg);
-}
-
-/**
- * octeon_i2c_write_int - write the TWSI_INT register
- * @i2c: The struct octeon_i2c
- * @data: Value to be written
- */
-static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
-{
- writeqflush(data, i2c->twsi_base + TWSI_INT);
-}
-
-/**
- * octeon_i2c_int_enable - enable the CORE interrupt
- * @i2c: The struct octeon_i2c
- *
- * The interrupt will be asserted when there is non-STAT_IDLE state in the
- * SW_TWSI_EOP_TWSI_STAT register.
- */
-static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
-{
- octeon_i2c_write_int(i2c, CORE_EN);
-}
-
-/* disable the CORE interrupt */
-static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
-{
- /* clear TS/ST/IFLG events */
- octeon_i2c_write_int(i2c, TS_INT | ST_INT);
-}
-
-static void octeon_i2c_disable_hlc(struct octeon_i2c *i2c)
-{
- if (!i2c->hlc_enabled)
- return;
-
- i2c->hlc_enabled = false;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
-}
-
-/**
- * octeon_i2c_int_enable78 - enable the CORE interrupt
- * @i2c: The struct octeon_i2c
- *
- * The interrupt will be asserted when there is non-STAT_IDLE state in the
- * SW_TWSI_EOP_TWSI_STAT register.
- */
-static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
-{
- atomic_inc_return(&i2c->int_en_cnt);
- enable_irq(i2c->irq);
-}
-
-static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
-{
- int count;
-
- /*
- * The interrupt can be disabled in two places, but we only
- * want to make the disable_irq_nosync() call once, so keep
- * track with the atomic variable.
- */
- count = atomic_dec_if_positive(cnt);
- if (count >= 0)
- disable_irq_nosync(irq);
-}
-
-/* disable the CORE interrupt */
-static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
-{
- __octeon_i2c_irq_disable(&i2c->int_en_cnt, i2c->irq);
-}
-
-/**
- * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
- * @i2c: The struct octeon_i2c
- *
- * The interrupt will be asserted when there is non-STAT_IDLE state in
- * the SW_TWSI_EOP_TWSI_STAT register.
- */
-static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
-{
- atomic_inc_return(&i2c->hlc_int_en_cnt);
- enable_irq(i2c->hlc_irq);
-}
-
-/* disable the ST interrupt */
-static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
-{
- __octeon_i2c_irq_disable(&i2c->hlc_int_en_cnt, i2c->hlc_irq);
-}
-
-/**
- * bitbang_unblock - unblock the bus
- * @i2c: The struct octeon_i2c
- *
- * If there was a reset while a device was driving 0 to bus, bus is blocked.
- * We toggle it free manually by some clock cycles and send a stop.
- */
-static void bitbang_unblock(struct octeon_i2c *i2c)
-{
- int state, i;
-
- octeon_i2c_disable_hlc(i2c);
- dev_dbg(i2c->dev, "%s\n", __func__);
-
- /* cycle 8+1 clocks with SDA high */
- for (i = 0; i < 9; i++) {
- octeon_i2c_write_int(i2c, 0);
- udelay(5);
- state = __raw_readq(i2c->twsi_base + TWSI_INT);
- if (state & (SDA | SCL))
- break;
- octeon_i2c_write_int(i2c, SCL_OVR);
- udelay(5);
- }
- /* hand-crank a STOP */
- octeon_i2c_write_int(i2c, SDA_OVR | SCL_OVR);
- udelay(5);
- octeon_i2c_write_int(i2c, SDA_OVR);
- udelay(5);
- octeon_i2c_write_int(i2c, 0);
-}
-
-/* interrupt service routine */
-static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
-{
- struct octeon_i2c *i2c = dev_id;
-
- i2c->int_dis(i2c);
- wake_up(&i2c->queue);
-
- return IRQ_HANDLED;
-}
-
-/* interrupt service routine */
-static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
-{
- struct octeon_i2c *i2c = dev_id;
-
- i2c->hlc_int_dis(i2c);
- wake_up(&i2c->queue);
-
- return IRQ_HANDLED;
-}
-
-static u64 octeon_i2c_read_ctl(struct octeon_i2c *i2c)
-{
- return octeon_i2c_read_sw64(i2c, SW_TWSI_EOP_TWSI_CTL);
-}
-
-static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
-{
- return (octeon_i2c_read_ctl(i2c) & TWSI_CTL_IFLG) != 0;
-}
-
-/*
- * Wait-helper which addresses the delayed-IFLAG problem by re-polling for
- * missing TWSI_CTL[IFLG] a few us later, when irq has signalled an event,
- * but none found. Skip this re-poll on the first (non-wakeup) call.
- */
-static int poll_iflg(struct octeon_i2c *i2c, int *first_p)
-{
- int iflg = octeon_i2c_test_iflg(i2c);
-
- if (iflg)
- return 1;
- if (*first_p)
- *first_p = 0;
- else {
- usleep_range(irq_early_us, 2 * irq_early_us);
- iflg = octeon_i2c_test_iflg(i2c);
- }
- return iflg;
-}
-
-/**
- * octeon_i2c_wait - wait for the IFLG to be set
- * @i2c: The struct octeon_i2c
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_wait(struct octeon_i2c *i2c)
-{
- int first = 1;
- long result;
-
- if (i2c->broken_irq_mode) {
- /*
- * Some chip revisions seem to not assert the irq in
- * the interrupt controller. So we must poll for the
- * IFLG change.
- */
- u64 end = get_jiffies_64() + i2c->adap.timeout;
-
- while (!octeon_i2c_test_iflg(i2c) &&
- time_before64(get_jiffies_64(), end))
- udelay(50);
-
- return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
- }
-
- i2c->int_en(i2c);
- result = wait_event_timeout(i2c->queue, poll_iflg(i2c, &first),
- i2c->adap.timeout);
- i2c->int_dis(i2c);
-
- if (result <= 0 && OCTEON_IS_MODEL(OCTEON_CN38XX) &&
- octeon_i2c_test_iflg(i2c)) {
- dev_err(i2c->dev,
- "broken irq connection detected, switching to polling mode.\n");
- i2c->broken_irq_mode = 1;
- return 0;
- }
- if (!result) {
- dev_dbg(i2c->dev, "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-/*
- * Cleanup low-level state & enable high-level.
- *
- * Returns -EAGAIN if low-level state could not be cleaned
- */
-static int octeon_i2c_enable_hlc(struct octeon_i2c *i2c)
-{
- int try = 0, ret = 0;
- u64 val;
-
- if (i2c->hlc_enabled)
- return 0;
-
- i2c->hlc_enabled = true;
-
- while (1) {
- val = octeon_i2c_read_ctl(i2c) & (TWSI_CTL_STA | TWSI_CTL_STP);
- if (!val)
- break;
-
- /* clear _IFLG event */
- if (val & TWSI_CTL_IFLG)
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB);
-
- if (try++ > 100) {
- pr_err("%s: giving up\n", __func__);
- ret = -EAGAIN;
- break;
- }
-
- /* spin until any start/stop has finished */
- udelay(10);
- }
-
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_CE | TWSI_CTL_AAK | TWSI_CTL_ENAB);
- return ret;
-}
-
-static int octeon_i2c_lost_arb(u8 code, int final_read)
-{
- switch (code) {
- /* Arbitration lost */
- case STAT_LOST_ARB_38:
- case STAT_LOST_ARB_68:
- case STAT_LOST_ARB_78:
- case STAT_LOST_ARB_B0:
- return -EAGAIN;
-
- /* Being addressed as slave, should back off & listen */
- case STAT_SLAVE_60:
- case STAT_SLAVE_70:
- case STAT_GENDATA_ACK:
- case STAT_GENDATA_NAK:
- return -EIO;
-
- /* Core busy as slave */
- case STAT_SLAVE_80:
- case STAT_SLAVE_88:
- case STAT_SLAVE_A0:
- case STAT_SLAVE_A8:
- case STAT_SLAVE_LOST:
- case STAT_SLAVE_NAK:
- case STAT_SLAVE_ACK:
- return -EIO;
-
- /* ACK allowed on pre-terminal bytes only */
- case STAT_RXDATA_ACK:
- if (!final_read)
- return 0;
- return -EAGAIN;
-
- /* NAK allowed on terminal byte only */
- case STAT_RXDATA_NAK:
- if (final_read)
- return 0;
- return -EAGAIN;
- case STAT_TXDATA_NAK:
- case STAT_TXADDR_NAK:
- case STAT_RXADDR_NAK:
- case STAT_AD2W_NAK:
- return -EAGAIN;
- }
- return 0;
-}
-
-static int check_arb(struct octeon_i2c *i2c, int final_read)
-{
- return octeon_i2c_lost_arb(octeon_i2c_read_sw(i2c,
- SW_TWSI_EOP_TWSI_STAT), final_read);
-}
-
-/* send STOP to the bus */
-static void octeon_i2c_stop(struct octeon_i2c *i2c)
-{
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STP);
-}
-
-static int octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
-{
- u8 status = 0;
- int tries;
-
- /* reset controller */
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
-
- for (tries = 10; tries && status != STAT_IDLE; tries--) {
- udelay(1);
- status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
- }
-
- if (status != STAT_IDLE) {
- dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n",
- __func__, status);
- return -EIO;
- }
-
- /* toggle twice to force both teardowns */
- octeon_i2c_enable_hlc(i2c);
- octeon_i2c_disable_hlc(i2c);
- return 0;
-}
-
-/*
- * TWSI state seems stuck. Not sure if it's TWSI-engine state or something
- * else on bus. The initial _stop() is always harmless, it just resets state
- * machine, does not _transmit_ STOP unless engine was active.
- */
-static int start_unstick(struct octeon_i2c *i2c)
-{
- octeon_i2c_stop(i2c);
-
- /*
- * Response is escalated over successive calls,
- * as EAGAIN provokes retries from i2c/core.
- */
- switch (reset_how++ % 4) {
- case 0:
- /* just the stop above */
- break;
- case 1:
- /*
- * Controller refused to send start flag. May be a
- * client is holding SDA low? Let's try to free it.
- */
- bitbang_unblock(i2c);
- break;
- case 2:
- /* re-init our TWSI hardware */
- octeon_i2c_initlowlevel(i2c);
- break;
- default:
- /* retry in caller */
- reset_how = 0;
- return -EAGAIN;
- }
- return 0;
-}
-
-/**
- * octeon_i2c_start - send START to the bus
- * @i2c: The struct octeon_i2c
- * @first: first msg in combined operation?
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_start(struct octeon_i2c *i2c, int first)
-{
- int result;
- u8 data;
-
- octeon_i2c_disable_hlc(i2c);
-
- while (1) {
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STA);
-
- result = octeon_i2c_wait(i2c);
- data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
-
- switch (data) {
- case STAT_START:
- case STAT_RSTART:
- if (!first)
- return -EAGAIN;
- reset_how = 0;
- return 0;
- case STAT_RXADDR_ACK:
- if (first)
- return -EAGAIN;
- return start_unstick(i2c);
- /*
- * case STAT_IDLE:
- * case STAT_ERROR:
- */
- default:
- if (!first)
- return -EAGAIN;
- start_unstick(i2c);
- }
- }
- return 0;
-}
-
-/**
- * octeon_i2c_write - send data to the bus via low-level controller
- * @i2c: The struct octeon_i2c
- * @target: Target address
- * @data: Pointer to the data to be sent
- * @length: Length of the data
- * @last: is last msg in combined operation?
- *
- * The address is sent over the bus, then the data.
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
- u8 *data, int length, int first, int last)
-{
- int result, i;
-
- result = octeon_i2c_start(i2c, first);
- if (result)
- return result;
-
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
-
- result = octeon_i2c_wait(i2c);
- if (result)
- return result;
-
- for (i = 0; i < length; i++) {
- result = check_arb(i2c, false);
- if (result)
- return result;
-
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
-
- result = octeon_i2c_wait(i2c);
- if (result)
- return result;
- result = check_arb(i2c, false);
- if (result)
- return result;
- }
-
- return 0;
-}
-
-/**
- * octeon_i2c_read - receive data from the bus via low-level controller
- * @i2c: The struct octeon_i2c
- * @target: Target address
- * @data: Pointer to the location to store the data
- * @rlength: Length of the data
- * @phase: which phase of a combined operation.
- * @recv_len: flag for length byte
- *
- * The address is sent over the bus, then the data is read.
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_read(struct octeon_i2c *i2c, int target, u8 *data,
- u16 *rlength, bool first, bool last, bool recv_len)
-{
- u8 ctl = TWSI_CTL_ENAB | TWSI_CTL_AAK;
- int length = *rlength;
- int i, result;
- u8 tmp;
-
- if (length < 1)
- return -EINVAL;
-
- result = octeon_i2c_start(i2c, first);
- if (result)
- return result;
-
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
-
- for (i = 0; i < length; ) {
- tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
- result = octeon_i2c_lost_arb(tmp, !(ctl & TWSI_CTL_AAK));
- if (result)
- return result;
-
- switch (tmp) {
- case STAT_RXDATA_ACK:
- case STAT_RXDATA_NAK:
- data[i++] = octeon_i2c_read_sw(i2c,
- SW_TWSI_EOP_TWSI_DATA);
- }
-
- /* NAK last recv'd byte, as a no-more-please */
- if (last && i == length - 1)
- ctl &= ~TWSI_CTL_AAK;
-
- /* clr iflg to allow next event */
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, ctl);
- result = octeon_i2c_wait(i2c);
- if (result)
- return result;
- if (recv_len && i == 0) {
- if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) {
- dev_err(i2c->dev,
- "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n",
- __func__, data[i]);
- return -EIO;
- }
- length += data[i];
- }
- }
- *rlength = length;
- return 0;
-}
-
-static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c)
-{
- u64 val = __raw_readq(i2c->twsi_base + SW_TWSI);
-
- return (val & SW_TWSI_V) == 0;
-}
-
-static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
-{
- octeon_i2c_write_int(i2c, ST_EN);
-}
-
-static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
-{
- /* clear ST/TS events, listen for neither */
- octeon_i2c_write_int(i2c, ST_INT | TS_INT);
-}
-
-/**
- * octeon_i2c_hlc_wait - wait for an HLC operation to complete
- * @i2c: The struct octeon_i2c
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
-{
- int result;
-
- if (i2c->broken_irq_mode) {
- /*
- * Some cn38xx boards did not assert the irq in
- * the interrupt controller. So we must poll for the
- * IFLG change.
- */
- u64 end = get_jiffies_64() + i2c->adap.timeout;
-
- while (!octeon_i2c_hlc_test_ready(i2c) &&
- time_before64(get_jiffies_64(), end))
- udelay(50);
-
- return octeon_i2c_hlc_test_ready(i2c) ? 0 : -ETIMEDOUT;
- }
-
- i2c->hlc_int_en(i2c);
- result = wait_event_interruptible_timeout(i2c->queue,
- octeon_i2c_hlc_test_ready(i2c), i2c->adap.timeout);
- i2c->hlc_int_dis(i2c);
- if (!result)
- octeon_i2c_hlc_int_clear(i2c);
-
- if (result <= 0 && OCTEON_IS_MODEL(OCTEON_CN38XX) &&
- octeon_i2c_hlc_test_ready(i2c)) {
- dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
- i2c->broken_irq_mode = 1;
- return 0;
- }
-
- if (result < 0) {
- dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__);
- return result;
- } else if (!result) {
- dev_dbg(i2c->dev, "%s: timeout\n", __func__);
- return -ETIMEDOUT;
- }
- return 0;
-}
-
-/* high-level-controller pure read of up to 8 bytes */
-static int octeon_i2c_simple_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
-{
- int i, j, ret = 0;
- u64 cmd;
-
- octeon_i2c_enable_hlc(i2c);
- cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
- /* SIZE */
- cmd |= (u64) (msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
- /* A */
- cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
-
- if (msgs[0].flags & I2C_M_TEN)
- cmd |= SW_TWSI_OP_10;
- else
- cmd |= SW_TWSI_OP_7;
-
- octeon_i2c_hlc_int_clear(i2c);
- __raw_writeq(cmd, i2c->twsi_base + SW_TWSI);
-
- ret = octeon_i2c_hlc_wait(i2c);
- if (ret)
- goto err;
-
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
- if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
-
- for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
- msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
-
- if (msgs[0].len > 4) {
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
- for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
- msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
- }
-
-err:
- return ret;
-}
-
-/* high-level-controller pure write of up to 8 bytes */
-static int octeon_i2c_simple_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
-{
- int i, j, ret = 0;
- u64 cmd;
-
- octeon_i2c_enable_hlc(i2c);
- octeon_i2c_hlc_int_clear(i2c);
-
- ret = check_arb(i2c, false);
- if (ret)
- goto err;
-
- cmd = SW_TWSI_V | SW_TWSI_SOVR;
- /* SIZE */
- cmd |= (u64) (msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
- /* A */
- cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
-
- if (msgs[0].flags & I2C_M_TEN)
- cmd |= SW_TWSI_OP_10;
- else
- cmd |= SW_TWSI_OP_7;
-
- for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
- cmd |= (u64)msgs[0].buf[j] << (8 * i);
-
- if (msgs[0].len > 4) {
- u64 ext = 0;
-
- for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
- ext |= (u64) msgs[0].buf[j] << (8 * i);
- writeqflush(ext, i2c->twsi_base + SW_TWSI_EXT);
- }
-
- writeqflush(cmd, i2c->twsi_base + SW_TWSI);
-
- ret = octeon_i2c_hlc_wait(i2c);
- if (ret)
- goto err;
-
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
- if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
-
- ret = check_arb(i2c, false);
-
-err:
- return ret;
-}
-
-/* high-level-controller composite write+read, msg0=addr, msg1=data */
-static int octeon_i2c_ia_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
-{
- int i, j, ret = 0;
- u64 cmd;
-
- octeon_i2c_enable_hlc(i2c);
-
- cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
- /* SIZE */
- cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
- /* A */
- cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
-
- if (msgs[0].flags & I2C_M_TEN)
- cmd |= SW_TWSI_OP_10_IA;
- else
- cmd |= SW_TWSI_OP_7_IA;
-
- if (msgs[0].len == 2) {
- u64 ext = 0;
-
- cmd |= SW_TWSI_EIA;
- ext = (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
- cmd |= (u64) msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
- __raw_writeq(ext, i2c->twsi_base + SW_TWSI_EXT);
- } else
- cmd |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
-
- octeon_i2c_hlc_int_clear(i2c);
- writeqflush(cmd, i2c->twsi_base + SW_TWSI);
-
- ret = octeon_i2c_hlc_wait(i2c);
- if (ret)
- goto err;
-
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
- if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
-
- for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
- msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
-
- if (msgs[1].len > 4) {
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
- for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
- msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
- }
-
-err:
- return ret;
-}
-
-/* high-level-controller composite write+write, m[0]len<=2, m[1]len<=8 */
-static int octeon_i2c_ia_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
-{
- bool set_ext = false;
- int i, j, ret = 0;
- u64 cmd, ext = 0;
-
- octeon_i2c_enable_hlc(i2c);
-
- cmd = SW_TWSI_V | SW_TWSI_SOVR;
- /* SIZE */
- cmd |= (u64) (msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
- /* A */
- cmd |= (u64) (msgs[0].addr & 0x7full) << SW_TWSI_A_SHIFT;
-
- if (msgs[0].flags & I2C_M_TEN)
- cmd |= SW_TWSI_OP_10_IA;
- else
- cmd |= SW_TWSI_OP_7_IA;
-
- if (msgs[0].len == 2) {
- cmd |= SW_TWSI_EIA;
- ext |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
- set_ext = true;
- cmd |= (u64) msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
- } else
- cmd |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
-
- for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
- cmd |= (u64) msgs[1].buf[j] << (8 * i);
-
- if (msgs[1].len > 4) {
- for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
- ext |= (u64)msgs[1].buf[j] << (8 * i);
- set_ext = true;
- }
- if (set_ext)
- writeqflush(ext, i2c->twsi_base + SW_TWSI_EXT);
-
- octeon_i2c_hlc_int_clear(i2c);
- writeqflush(cmd, i2c->twsi_base + SW_TWSI);
-
- ret = octeon_i2c_hlc_wait(i2c);
- if (ret)
- goto err;
-
- cmd = octeon_i2c_read_sw64(i2c, SW_TWSI_EOP_TWSI_STAT);
- if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
- ret = octeon_i2c_lost_arb(cmd, false);
-
-err:
- return ret;
-}
-
-/**
- * octeon_i2c_xfer - The driver's master_xfer function
- * @adap: Pointer to the i2c_adapter structure
- * @msgs: Pointer to the messages to be processed
- * @num: Length of the MSGS array
- *
- * Returns the number of messages processed, or a negative errno on failure.
- */
-static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
- int num)
-{
- struct octeon_i2c *i2c = i2c_get_adapdata(adap);
- int i, ret = 0;
-
- if (num == 1) {
- if (msgs[0].len > 0 && msgs[0].len <= 8) {
- if (msgs[0].flags & I2C_M_RD)
- ret = octeon_i2c_simple_read(i2c, msgs);
- else
- ret = octeon_i2c_simple_write(i2c, msgs);
- goto out;
- }
- } else if (num == 2) {
- if ((msgs[0].flags & I2C_M_RD) == 0 &&
- (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
- msgs[0].len > 0 && msgs[0].len <= 2 &&
- msgs[1].len > 0 && msgs[1].len <= 8 &&
- msgs[0].addr == msgs[1].addr) {
- if (msgs[1].flags & I2C_M_RD)
- ret = octeon_i2c_ia_read(i2c, msgs);
- else
- ret = octeon_i2c_ia_write(i2c, msgs);
- goto out;
- }
- }
-
- for (i = 0; ret == 0 && i < num; i++) {
- struct i2c_msg *pmsg = &msgs[i];
- bool last = (i == (num - 1));
-
- dev_dbg(i2c->dev,
- "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
- pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, pmsg->addr, i + 1, num);
- if (pmsg->flags & I2C_M_RD)
- ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
- &pmsg->len, !i, last,
- pmsg->flags & I2C_M_RECV_LEN);
- else
- ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
- pmsg->len, !i, last);
- }
- octeon_i2c_stop(i2c);
-out:
- return ret ? -EAGAIN : num;
-}
-
-static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm octeon_i2c_algo = {
- .master_xfer = octeon_i2c_xfer,
- .functionality = octeon_i2c_functionality,
-};
-
-static struct i2c_adapter octeon_i2c_ops = {
- .owner = THIS_MODULE,
- .name = "OCTEON adapter",
- .algo = &octeon_i2c_algo,
-};
-
-/* calculate and set clock divisors */
-static void octeon_i2c_setclock(struct octeon_i2c *i2c)
-{
- int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
- int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
-
- for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
- /*
- * An mdiv value of less than 2 seems to not work well
- * with ds1337 RTCs, so we constrain it to larger values.
- */
- for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
- /*
- * For given ndiv and mdiv values check the
- * two closest thp values.
- */
- tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
- tclk *= (1 << ndiv_idx);
- thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
-
- for (inc = 0; inc <= 1; inc++) {
- thp_idx = thp_base + inc;
- if (thp_idx < 5 || thp_idx > 0xff)
- continue;
-
- foscl = i2c->sys_freq / (2 * (thp_idx + 1));
- foscl = foscl / (1 << ndiv_idx);
- foscl = foscl / (mdiv_idx + 1) / 10;
- diff = abs(foscl - i2c->twsi_freq);
- if (diff < delta_hz) {
- delta_hz = diff;
- thp = thp_idx;
- mdiv = mdiv_idx;
- ndiv = ndiv_idx;
- }
- }
- }
- }
- octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
-}
-
-static int octeon_i2c_probe(struct platform_device *pdev)
-{
- struct device_node *node = pdev->dev.of_node;
- int irq, hlc_irq = 0, result = 0;
- struct resource *res_mem;
- struct octeon_i2c *i2c;
- bool cn78xx_style;
-
- cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
- if (cn78xx_style) {
- hlc_irq = platform_get_irq(pdev, 0);
- if (hlc_irq < 0)
- return hlc_irq;
-
- irq = platform_get_irq(pdev, 2);
- if (irq < 0)
- return irq;
- } else {
- /* All adaptors have an irq. */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
- }
-
- i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
- if (!i2c) {
- result = -ENOMEM;
- goto out;
- }
- i2c->dev = &pdev->dev;
-
- res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- if (res_mem == NULL) {
- dev_err(i2c->dev, "found no memory resource\n");
- result = -ENXIO;
- goto out;
- }
-
- /*
- * "clock-rate" is a legacy binding, the official binding is
- * "clock-frequency". Try the official one first and then
- * fall back if it doesn't exist.
- */
- if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
- of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
- dev_err(i2c->dev,
- "no I2C 'clock-rate' or 'clock-frequency' property\n");
- result = -ENXIO;
- goto out;
- }
-
- i2c->sys_freq = octeon_get_io_clock_rate();
-
- if (!devm_request_mem_region(&pdev->dev, res_mem->start,
- resource_size(res_mem), res_mem->name)) {
- dev_err(i2c->dev, "request_mem_region failed\n");
- goto out;
- }
-
- i2c->twsi_base = devm_ioremap(&pdev->dev, res_mem->start,
- resource_size(res_mem));
- init_waitqueue_head(&i2c->queue);
- i2c->irq = irq;
-
- if (cn78xx_style) {
- i2c->hlc_irq = hlc_irq;
-
- i2c->int_en = octeon_i2c_int_enable78;
- i2c->int_dis = octeon_i2c_int_disable78;
- i2c->hlc_int_en = octeon_i2c_hlc_int_enable78;
- i2c->hlc_int_dis = octeon_i2c_hlc_int_disable78;
-
- irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
- irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
-
- result = devm_request_irq(&pdev->dev, i2c->irq,
- octeon_i2c_isr, 0, DRV_NAME, i2c);
-
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto out;
- }
- result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
- octeon_i2c_hlc_isr78, 0,
- DRV_NAME, i2c);
-
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto out;
- }
- } else {
- i2c->int_en = octeon_i2c_int_enable;
- i2c->int_dis = octeon_i2c_int_disable;
- i2c->hlc_int_en = octeon_i2c_hlc_int_enable;
- i2c->hlc_int_dis = octeon_i2c_int_disable;
-
- result = devm_request_irq(&pdev->dev, i2c->irq,
- octeon_i2c_isr, 0, DRV_NAME, i2c);
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto out;
- }
- }
-
- result = octeon_i2c_initlowlevel(i2c);
- if (result) {
- dev_err(i2c->dev, "init low level failed\n");
- goto out;
- }
-
- octeon_i2c_setclock(i2c);
-
- i2c->adap = octeon_i2c_ops;
- i2c->adap.timeout = msecs_to_jiffies(timeout);
- i2c->adap.retries = 10;
- i2c->adap.dev.parent = &pdev->dev;
- i2c->adap.dev.of_node = node;
- i2c_set_adapdata(&i2c->adap, i2c);
- platform_set_drvdata(pdev, i2c);
-
- result = i2c_add_adapter(&i2c->adap);
- if (result < 0) {
- dev_err(i2c->dev, "failed to add adapter\n");
- goto out;
- }
- dev_info(i2c->dev, "probed\n");
- return 0;
-
-out:
- return result;
-};
-
-static int octeon_i2c_remove(struct platform_device *pdev)
-{
- struct octeon_i2c *i2c = platform_get_drvdata(pdev);
-
- i2c_del_adapter(&i2c->adap);
- return 0;
-};
-
-static const struct of_device_id octeon_i2c_match[] = {
- { .compatible = "cavium,octeon-3860-twsi", },
- { .compatible = "cavium,octeon-7890-twsi", },
- {},
-};
-MODULE_DEVICE_TABLE(of, octeon_i2c_match);
-
-static struct platform_driver octeon_i2c_driver = {
- .probe = octeon_i2c_probe,
- .remove = octeon_i2c_remove,
- .driver = {
- .name = DRV_NAME,
- .of_match_table = octeon_i2c_match,
- },
-};
-
-module_platform_driver(octeon_i2c_driver);
-
-MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-thunderx-core.c b/drivers/i2c/busses/i2c-thunderx-core.c
new file mode 100644
index 0000000..e14838a
--- /dev/null
+++ b/drivers/i2c/busses/i2c-thunderx-core.c
@@ -0,0 +1,266 @@
+/*
+ * Cavium ThunderX i2c driver.
+ *
+ * Copyright (C) 2015,2016 Cavium Inc.
+ * Authors: Fred Martin <fmartin@caviumnetworks.com>
+ * Jan Glauber <jglauber@cavium.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "i2c-cavium.h"
+
+#define DRV_NAME "i2c-thunderx"
+
+#define PCI_CFG_REG_BAR_NUM 0
+#define PCI_DEVICE_ID_THUNDER_TWSI 0xa012
+
+#define TWSI_DFL_RATE 100000
+#define SYS_FREQ_DEFAULT 800000000
+
+#define TWSI_INT_ENA_W1C 0x1028
+#define TWSI_INT_ENA_W1S 0x1030
+
+/*
+ * Enable the CORE interrupt.
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void thunder_i2c_int_enable(struct octeon_i2c *i2c)
+{
+ __raw_writeq(INT_ENA_CORE, i2c->twsi_base + TWSI_INT_ENA_W1S);
+ __raw_readq(i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+/*
+ * Disable the CORE interrupt.
+ */
+static void thunder_i2c_int_disable(struct octeon_i2c *i2c)
+{
+ __raw_writeq(INT_ENA_CORE, i2c->twsi_base + TWSI_INT_ENA_W1C);
+ __raw_readq(i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static void thunder_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+ __raw_writeq(INT_ENA_ST | INT_ENA_TS,
+ i2c->twsi_base + TWSI_INT_ENA_W1S);
+ __raw_readq(i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+static void thunder_i2c_hlc_int_disable(struct octeon_i2c *i2c)
+{
+ __raw_writeq(INT_ENA_ST | INT_ENA_TS,
+ i2c->twsi_base + TWSI_INT_ENA_W1C);
+ __raw_readq(i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static u32 thunderx_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm thunderx_i2c_algo = {
+ .master_xfer = octeon_i2c_xfer,
+ .functionality = thunderx_i2c_functionality,
+};
+
+static struct i2c_adapter thunderx_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "ThunderX adapter",
+ .algo = &thunderx_i2c_algo,
+};
+
+static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c)
+{
+ int ret;
+
+ i2c->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(i2c->clk)) {
+ i2c->clk = NULL;
+ goto skip;
+ }
+
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret)
+ goto skip;
+ i2c->sys_freq = clk_get_rate(i2c->clk);
+
+skip:
+ if (!i2c->sys_freq)
+ i2c->sys_freq = SYS_FREQ_DEFAULT;
+
+ dev_info(dev, "Set system clock to %u\n", i2c->sys_freq);
+}
+
+static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
+{
+ if (!clk)
+ return;
+ clk_disable_unprepare(clk);
+ devm_clk_put(dev, clk);
+}
+
+static void thunder_i2c_set_name(struct pci_dev *pdev, struct octeon_i2c *i2c,
+ char *name)
+{
+ u8 i2c_bus_id, soc_node;
+ resource_size_t start;
+
+ start = pci_resource_start(pdev, PCI_CFG_REG_BAR_NUM);
+ soc_node = (start >> 44) & 0x3;
+ i2c_bus_id = (start >> 24) & 0x7;
+ snprintf(name, 10, "i2c%d", soc_node * 6 + i2c_bus_id);
+
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name), "thunderx-i2c-%d.%d",
+ soc_node, i2c_bus_id);
+}
+
+static int thunder_i2c_probe_pci(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = NULL;
+ struct octeon_i2c *i2c;
+ char i2c_name[10];
+ int ret = 0;
+
+ i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ i2c->dev = dev;
+ pci_set_drvdata(pdev, i2c);
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(dev, "Failed to enable PCI device\n");
+ goto out_free_i2c;
+ }
+
+ ret = pci_request_regions(pdev, DRV_NAME);
+ if (ret) {
+ dev_err(dev, "PCI request regions failed 0x%x\n", ret);
+ goto out_disable_device;
+ }
+
+ i2c->twsi_base = pci_ioremap_bar(pdev, PCI_CFG_REG_BAR_NUM);
+ if (!i2c->twsi_base) {
+ dev_err(dev, "Cannot map CSR memory space\n");
+ ret = -EINVAL;
+ goto out_release_regions;
+ }
+
+ thunder_i2c_clock_enable(dev, i2c);
+
+ thunder_i2c_set_name(pdev, i2c, i2c_name);
+ node = of_find_node_by_name(NULL, i2c_name);
+ if (!node || of_property_read_u32(node, "clock-frequency",
+ &i2c->twsi_freq))
+ i2c->twsi_freq = TWSI_DFL_RATE;
+
+ init_waitqueue_head(&i2c->queue);
+
+ i2c->int_en = thunder_i2c_int_enable;
+ i2c->int_dis = thunder_i2c_int_disable;
+ i2c->hlc_int_en = thunder_i2c_hlc_int_enable;
+ i2c->hlc_int_dis = thunder_i2c_hlc_int_disable;
+
+ ret = pci_enable_msix(pdev, &i2c->i2c_msix, 1);
+ if (ret) {
+ dev_err(dev, "Unable to enable MSI-X\n");
+ goto out_unmap;
+ }
+
+ ret = devm_request_irq(dev, i2c->i2c_msix.vector, octeon_i2c_isr, 0,
+ DRV_NAME, i2c);
+ if (ret < 0) {
+ dev_err(dev, "Failed to attach i2c interrupt\n");
+ goto out_msix;
+ }
+
+ ret = octeon_i2c_initlowlevel(i2c);
+ if (ret) {
+ dev_err(dev, "Init low level failed\n");
+ goto out_msix;
+ }
+
+ octeon_i2c_setclock(i2c);
+
+ i2c->adap = thunderx_i2c_ops;
+ i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ i2c->adap.timeout = HZ / 50;
+ i2c->adap.dev.parent = dev;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
+ i2c_set_adapdata(&i2c->adap, i2c);
+
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret < 0) {
+ dev_err(dev, "Failed to add i2c adapter\n");
+ goto out_irq;
+ }
+
+ dev_info(i2c->dev, "probed\n");
+ return 0;
+
+out_irq:
+ devm_free_irq(dev, i2c->i2c_msix.vector, i2c);
+out_msix:
+ pci_disable_msix(pdev);
+out_unmap:
+ iounmap(i2c->twsi_base);
+ thunder_i2c_clock_disable(dev, i2c->clk);
+out_release_regions:
+ pci_release_regions(pdev);
+out_disable_device:
+ pci_disable_device(pdev);
+out_free_i2c:
+ pci_set_drvdata(pdev, NULL);
+ devm_kfree(dev, i2c);
+ return ret;
+}
+
+static void thunder_i2c_remove_pci(struct pci_dev *pdev)
+{
+ struct octeon_i2c *i2c = pci_get_drvdata(pdev);
+ struct device *dev;
+
+ if (!i2c)
+ return;
+
+ dev = i2c->dev;
+ thunder_i2c_clock_disable(dev, i2c->clk);
+ i2c_del_adapter(&i2c->adap);
+ devm_free_irq(dev, i2c->i2c_msix.vector, i2c);
+ pci_disable_msix(pdev);
+ iounmap(i2c->twsi_base);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ devm_kfree(dev, i2c);
+}
+
+static const struct pci_device_id thunder_i2c_pci_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_TWSI) },
+ { 0, } /* end of table */
+};
+
+MODULE_DEVICE_TABLE(pci, thunder_i2c_pci_id_table);
+
+static struct pci_driver thunder_i2c_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = thunder_i2c_pci_id_table,
+ .probe = thunder_i2c_probe_pci,
+ .remove = thunder_i2c_remove_pci,
+};
+
+module_pci_driver(thunder_i2c_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fred Martin <fmartin@caviumnetworks.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium ThunderX SOC");
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 10/10] i2c: thunderx: add smbus support
2016-03-04 17:57 [PATCH v2 00/10] i2c-octeon and i2c-thunderx drivers Jan Glauber
` (8 preceding siblings ...)
2016-03-04 17:57 ` [PATCH v2 09/10] i2c: split i2c-octeon driver and add ThunderX support Jan Glauber
@ 2016-03-04 17:57 ` Jan Glauber
9 siblings, 0 replies; 14+ messages in thread
From: Jan Glauber @ 2016-03-04 17:57 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-kernel, linux-i2c, David Daney, Jan Glauber
Add smbus alert interrupt support.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
---
drivers/i2c/busses/i2c-cavium.h | 6 ++++++
drivers/i2c/busses/i2c-thunderx-core.c | 35 ++++++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/drivers/i2c/busses/i2c-cavium.h b/drivers/i2c/busses/i2c-cavium.h
index aadd4f5..062bc022 100644
--- a/drivers/i2c/busses/i2c-cavium.h
+++ b/drivers/i2c/busses/i2c-cavium.h
@@ -3,6 +3,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -117,6 +118,11 @@ struct octeon_i2c {
#if IS_ENABLED(CONFIG_I2C_THUNDERX)
struct msix_entry i2c_msix;
#endif
+
+#if IS_ENABLED(CONFIG_I2C_SMBUS)
+ struct i2c_smbus_alert_setup alert_data;
+ struct i2c_client *ara;
+#endif
};
static inline void writeqflush(u64 val, void __iomem *addr)
diff --git a/drivers/i2c/busses/i2c-thunderx-core.c b/drivers/i2c/busses/i2c-thunderx-core.c
index e14838a..cdfadee 100644
--- a/drivers/i2c/busses/i2c-thunderx-core.c
+++ b/drivers/i2c/busses/i2c-thunderx-core.c
@@ -9,10 +9,12 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_irq.h>
#include <linux/pci.h>
#include "i2c-cavium.h"
@@ -107,6 +109,35 @@ static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
devm_clk_put(dev, clk);
}
+static int thunder_i2c_smbus_setup(struct octeon_i2c *i2c,
+ struct device_node *node)
+{
+#if IS_ENABLED(CONFIG_I2C_SMBUS)
+ u32 type;
+
+ i2c->alert_data.irq = irq_of_parse_and_map(node, 0);
+ if (!i2c->alert_data.irq)
+ return -EINVAL;
+
+ type = irqd_get_trigger_type(irq_get_irq_data(i2c->alert_data.irq));
+ i2c->alert_data.alert_edge_triggered =
+ (type & IRQ_TYPE_LEVEL_MASK) ? 1 : 0;
+
+ i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data);
+ if (!i2c->ara)
+ return -ENODEV;
+#endif
+ return 0;
+}
+
+static void thunder_i2c_smbus_remove(struct octeon_i2c *i2c)
+{
+#if IS_ENABLED(CONFIG_I2C_SMBUS)
+ if (i2c->ara)
+ i2c_unregister_device(i2c->ara);
+#endif
+}
+
static void thunder_i2c_set_name(struct pci_dev *pdev, struct octeon_i2c *i2c,
char *name)
{
@@ -205,6 +236,9 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
goto out_irq;
}
+ ret = thunder_i2c_smbus_setup(i2c, node);
+ if (ret < 0)
+ dev_err(dev, "Failed to setup smbus alert\n");
dev_info(i2c->dev, "probed\n");
return 0;
@@ -235,6 +269,7 @@ static void thunder_i2c_remove_pci(struct pci_dev *pdev)
dev = i2c->dev;
thunder_i2c_clock_disable(dev, i2c->clk);
+ thunder_i2c_smbus_remove(i2c);
i2c_del_adapter(&i2c->adap);
devm_free_irq(dev, i2c->i2c_msix.vector, i2c);
pci_disable_msix(pdev);
--
1.9.1
^ permalink raw reply related [flat|nested] 14+ messages in thread