From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-kernel@vger.kernel.org, Anand Moon <linux.amoon@gmail.com>,
Kukjin Kim <kgene@kernel.org>,
linux-samsung-soc@vger.kernel.org,
Wolfram Sang <wsa@the-dreams.de>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
Date: Sun, 17 Apr 2016 15:34:21 +0200 [thread overview]
Message-ID: <20160417133421.GC3620@kozik-lap> (raw)
In-Reply-To: <1460855693-28225-2-git-send-email-javier@osg.samsung.com>
On Sat, Apr 16, 2016 at 09:14:53PM -0400, Javier Martinez Canillas wrote:
> The exynos5 I2C controller driver always prepares and enables a clock
> before using it and then disables unprepares it when the clock is not
> used anymore.
>
> But this can cause a possible ABBA deadlock in some scenarios since a
> driver that uses regmap to access its I2C registers, will first grab
> the regmap lock and then the I2C xfer function will grab the prepare
> lock when preparing the I2C clock. But since the clock driver also
> uses regmap for I2C accesses, preparing a clock will first grab the
> prepare lock and then the regmap lock when using the regmap API.
>
> An example of this happens on the Exynos5422 Odroid XU4 board where a
> s2mps11 PMIC is used and both the s2mps11 regulators and clk drivers
> share the same I2C regmap.
>
> The possible deadlock is reported by the kernel lockdep:
>
> Possible unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(sec_core:428:(regmap)->lock);
> lock(prepare_lock);
> lock(sec_core:428:(regmap)->lock);
> lock(prepare_lock);
>
> *** DEADLOCK ***
>
> Fix it by leaving the code prepared on probe and use {en,dis}able in
> the I2C transfer function.
>
> This patch is similar to commit 34e81ad5f0b6 ("i2c: s3c2410: fix ABBA
> deadlock by keeping clock prepared") that fixes the same bug in other
> driver for an I2C controller found in Samsung SoCs.
>
> Reported-by: Anand Moon <linux.amoon@gmail.com>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Reviewed-by: Anand Moon <linux.amoon@gmail.com>
> Tested-by: Anand Moon <linux.amoon@gmail.com>
>
> ---
>
> Changes in v2:
> - Add Anand Moon's Reviewed and Tested by tags.
> - Unprepare the clock on suspend. Suggested by Krzysztof Kozlowski.
>
> drivers/i2c/busses/i2c-exynos5.c | 14 +++++++++++---
> 1 file changed, 11 insertions(+), 3 deletions(-)
Hi,
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
next prev parent reply other threads:[~2016-04-17 13:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-17 1:14 [PATCH v2 1/2] i2c: exynos5: Check clk_prepare_enable() return value Javier Martinez Canillas
2016-04-17 1:14 ` [PATCH v2 2/2] i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared Javier Martinez Canillas
2016-04-17 13:34 ` Krzysztof Kozlowski [this message]
2016-04-22 13:31 ` Wolfram Sang
2016-04-17 13:32 ` [PATCH v2 1/2] i2c: exynos5: Check clk_prepare_enable() return value Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160417133421.GC3620@kozik-lap \
--to=k.kozlowski@samsung.com \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux.amoon@gmail.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).