Re: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads

[Wolfram Sang <wsa@the-dreams.de>]

[-- Attachment #1: Type: text/plain, Size: 1355 bytes --]

On Mon, Aug 07, 2017 at 05:10:58PM -0400, Stephen Douthit wrote:
> Hello all,
> 
> We ran into an issue where the ipmi_ssif and i2c-ismt drivers don't
> agree on the format for data returned by i2c_smbus_read_block_data()
> 
> Looking at the traffic on the wire with a beagle analyzer:
> -----
> Packet Details   (Values in hex; [S] = Start condition;
>                   [P] = Stop condition; * = No Ack)
> [S] <10:R> 12 1C 01 00 00 80 02 1C 02 8F BE 12 00 25 12 41 01 00 00* [P]
> -----
> 
> Looking at the matching kernel trace:
> -----
> kssif0010-759   [001] ....  1435.891090: smbus_read: i2c-0 a=010 f=0000 c=3 BLOCK_DATA
> kssif0010-759   [001] ....  1436.202906: smbus_reply: i2c-0 a=010 f=0000 c=3 BLOCK_DATA l=20 [13-12-1c-01-00-00-80-02-1c-02-8f-be-12-00-25-12-41-01-00-00]
> kssif0010-759   [001] ....  1436.202908: smbus_result: i2c-0 a=010 f=0000 c=3 BLOCK_DATA rd res=0
> -----
> 
> So basically the byte count already precedes the data in the dma_buffer,
> then the driver sticks desc->rxbytes in front of this resulting in the
> trace above.
> 
> The first patch tackles this.
> 
> The second patch in the series adds a sanity check on the byte count
> supplied by the slave device.  This might be a nice to have, but is
> probably less critical.

Both patches look good to me. Seth, Neil, do you agree?


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]