From: Radu Rendec <radu.rendec@gmail.com>
To: linux-i2c@vger.kernel.org
Cc: Radu Rendec <radu.rendec@gmail.com>
Subject: [PATCH 1/2] i2c: ismt: 16-byte align the DMA buffer address
Date: Fri, 18 Aug 2017 17:01:27 +0100 [thread overview]
Message-ID: <20170818160128.21228-2-radu.rendec@gmail.com> (raw)
In-Reply-To: <20170818160128.21228-1-radu.rendec@gmail.com>
Use only a portion of the data buffer for DMA transfers, which is always
16-byte aligned. This makes the DMA buffer address 16-byte aligned and
compensates for spurious hardware parity errors that may appear when the
DMA buffer address is not 16-byte aligned.
The data buffer is enlarged in order to accommodate any possible 16-byte
alignment offset and changes the DMA code to only use a portion of the
data buffer, which is 16-byte aligned.
The symptom of the hardware issue is the same as the one addressed in
v3.12-rc2-5-gbf41691 and manifests by transfers failing with EIO, with
bit 9 being set in the ERRSTS register.
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
---
drivers/i2c/busses/i2c-ismt.c | 37 +++++++++++++++++++------------------
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index e98e44e..ccce0ca 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -172,7 +172,7 @@ struct ismt_priv {
dma_addr_t io_rng_dma; /* descriptor HW base addr */
u8 head; /* ring buffer head pointer */
struct completion cmp; /* interrupt completion */
- u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* temp R/W data buffer */
+ u8 buffer[I2C_SMBUS_BLOCK_MAX + 16]; /* temp R/W data buffer */
};
/**
@@ -320,7 +320,7 @@ static int ismt_process_desc(const struct ismt_desc *desc,
struct ismt_priv *priv, int size,
char read_write)
{
- u8 *dma_buffer = priv->dma_buffer;
+ u8 *dma_buffer = (u8*)ALIGN((unsigned long)&priv->buffer[0], 16);
dev_dbg(&priv->pci_dev->dev, "Processing completed descriptor\n");
__ismt_desc_dump(&priv->pci_dev->dev, desc);
@@ -388,11 +388,12 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
struct ismt_desc *desc;
struct ismt_priv *priv = i2c_get_adapdata(adap);
struct device *dev = &priv->pci_dev->dev;
+ u8 *dma_buffer = (u8*)ALIGN((unsigned long)&priv->buffer[0], 16);
desc = &priv->hw[priv->head];
/* Initialize the DMA buffer */
- memset(priv->dma_buffer, 0, sizeof(priv->dma_buffer));
+ memset(priv->buffer, 0, sizeof(priv->buffer));
/* Initialize the descriptor */
memset(desc, 0, sizeof(struct ismt_desc));
@@ -441,8 +442,8 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
desc->wr_len_cmd = 2;
dma_size = 2;
dma_direction = DMA_TO_DEVICE;
- priv->dma_buffer[0] = command;
- priv->dma_buffer[1] = data->byte;
+ dma_buffer[0] = command;
+ dma_buffer[1] = data->byte;
} else {
/* Read Byte */
dev_dbg(dev, "I2C_SMBUS_BYTE_DATA: READ\n");
@@ -461,9 +462,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
desc->wr_len_cmd = 3;
dma_size = 3;
dma_direction = DMA_TO_DEVICE;
- priv->dma_buffer[0] = command;
- priv->dma_buffer[1] = data->word & 0xff;
- priv->dma_buffer[2] = data->word >> 8;
+ dma_buffer[0] = command;
+ dma_buffer[1] = data->word & 0xff;
+ dma_buffer[2] = data->word >> 8;
} else {
/* Read Word */
dev_dbg(dev, "I2C_SMBUS_WORD_DATA: READ\n");
@@ -481,9 +482,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
desc->rd_len = 2;
dma_size = 3;
dma_direction = DMA_BIDIRECTIONAL;
- priv->dma_buffer[0] = command;
- priv->dma_buffer[1] = data->word & 0xff;
- priv->dma_buffer[2] = data->word >> 8;
+ dma_buffer[0] = command;
+ dma_buffer[1] = data->word & 0xff;
+ dma_buffer[2] = data->word >> 8;
break;
case I2C_SMBUS_BLOCK_DATA:
@@ -494,8 +495,8 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
dma_direction = DMA_TO_DEVICE;
desc->wr_len_cmd = dma_size;
desc->control |= ISMT_DESC_BLK;
- priv->dma_buffer[0] = command;
- memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
+ dma_buffer[0] = command;
+ memcpy(&dma_buffer[1], &data->block[1], dma_size - 1);
} else {
/* Block Read */
dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: READ\n");
@@ -522,8 +523,8 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
dma_direction = DMA_TO_DEVICE;
desc->wr_len_cmd = dma_size;
desc->control |= ISMT_DESC_I2C;
- priv->dma_buffer[0] = command;
- memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1);
+ dma_buffer[0] = command;
+ memcpy(&dma_buffer[1], &data->block[1], dma_size - 1);
} else {
/* i2c Block Read */
dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: READ\n");
@@ -552,18 +553,18 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
if (dma_size != 0) {
dev_dbg(dev, " dev=%p\n", dev);
dev_dbg(dev, " data=%p\n", data);
- dev_dbg(dev, " dma_buffer=%p\n", priv->dma_buffer);
+ dev_dbg(dev, " dma_buffer=%p\n", dma_buffer);
dev_dbg(dev, " dma_size=%d\n", dma_size);
dev_dbg(dev, " dma_direction=%d\n", dma_direction);
dma_addr = dma_map_single(dev,
- priv->dma_buffer,
+ dma_buffer,
dma_size,
dma_direction);
if (dma_mapping_error(dev, dma_addr)) {
dev_err(dev, "Error in mapping dma buffer %p\n",
- priv->dma_buffer);
+ dma_buffer);
return -EIO;
}
--
2.9.5
next prev parent reply other threads:[~2017-08-18 16:01 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-18 16:01 [PATCH 0/2] i2c: ismt: align the DMA buffer to avoid parity errors Radu Rendec
2017-08-18 16:01 ` Radu Rendec [this message]
2017-08-27 14:37 ` [PATCH 1/2] i2c: ismt: 16-byte align the DMA buffer address Wolfram Sang
2017-08-29 16:37 ` radu.rendec
2018-01-04 13:46 ` [1/2] " Neil Horman
2018-01-04 15:42 ` Radu Rendec
2018-01-04 16:22 ` Neil Horman
2018-01-04 17:01 ` Radu Rendec
2018-01-05 1:47 ` Neil Horman
2018-01-15 12:33 ` Radu Rendec
2018-01-15 18:53 ` Neil Horman
2018-01-15 19:02 ` Wolfram Sang
2018-01-15 19:53 ` Neil Horman
2017-08-18 16:01 ` [PATCH 2/2] i2c: ismt: dump registers at the end of transactions Radu Rendec
2018-01-04 13:52 ` [2/2] " Neil Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170818160128.21228-2-radu.rendec@gmail.com \
--to=radu.rendec@gmail.com \
--cc=linux-i2c@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).