linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Franklin S Cooper Jr <fcooper@ti.com>
To: wsa@the-dreams.de, robh+dt@kernel.org, linux@armlinux.org.uk,
	nsekhar@ti.com, linux-i2c@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, grygorii.strashko@ti.com,
	vigneshr@ti.com
Cc: Franklin S Cooper Jr <fcooper@ti.com>
Subject: [PATCH v4 1/2] i2c: davinci: Add PM Runtime Support
Date: Mon, 11 Sep 2017 15:11:44 -0500	[thread overview]
Message-ID: <20170911201145.31257-2-fcooper@ti.com> (raw)
In-Reply-To: <20170911201145.31257-1-fcooper@ti.com>

66AK2G has I2C instances that are not apart of the ALWAYS_ON power domain
unlike other Keystone 2 SoCs and OMAPL138. Therefore, pm_runtime
is required to insure the power domain used by the specific I2C instance is
properly turned on along with its functional clock.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
Version 4 changes:
Fix wording on error message
Fix additional error path

Version 3 changes:
Remove several statements that set clk to NULL
Fix error path

 drivers/i2c/busses/i2c-davinci.c | 67 +++++++++++++++++++++++++++++++++-------
 1 file changed, 55 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index b8c4353..a2d9f7c 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,6 +36,7 @@
 #include <linux/gpio.h>
 #include <linux/of_device.h>
 #include <linux/platform_data/i2c-davinci.h>
+#include <linux/pm_runtime.h>
 
 /* ----- global defines ----------------------------------------------- */
 
@@ -122,6 +123,9 @@
 /* set the SDA GPIO low */
 #define DAVINCI_I2C_DCLR_PDCLR1	BIT(1)
 
+/* timeout for pm runtime autosuspend */
+#define DAVINCI_I2C_PM_TIMEOUT	1000	/* ms */
+
 struct davinci_i2c_dev {
 	struct device           *dev;
 	void __iomem		*base;
@@ -541,10 +545,17 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
 
+	ret = pm_runtime_get_sync(dev->dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to runtime_get device: %d\n", ret);
+		pm_runtime_put_noidle(dev->dev);
+		return ret;
+	}
+
 	ret = i2c_davinci_wait_bus_not_busy(dev);
 	if (ret < 0) {
 		dev_warn(dev->dev, "timeout waiting for bus ready\n");
-		return ret;
+		goto out;
 	}
 
 	for (i = 0; i < num; i++) {
@@ -552,14 +563,19 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num,
 			ret);
 		if (ret < 0)
-			return ret;
+			goto out;
 	}
 
+	ret = num;
 #ifdef CONFIG_CPU_FREQ
 	complete(&dev->xfr_complete);
 #endif
 
-	return num;
+out:
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
+
+	return ret;
 }
 
 static u32 i2c_davinci_func(struct i2c_adapter *adap)
@@ -599,6 +615,9 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 	int count = 0;
 	u16 w;
 
+	if (pm_runtime_suspended(dev->dev))
+		return IRQ_NONE;
+
 	while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) {
 		dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
 		if (count++ == 100) {
@@ -802,13 +821,24 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
-	clk_prepare_enable(dev->clk);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(dev->base)) {
-		r = PTR_ERR(dev->base);
-		goto err_unuse_clocks;
+		return PTR_ERR(dev->base);
+	}
+
+	pm_runtime_set_autosuspend_delay(dev->dev,
+					 DAVINCI_I2C_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(dev->dev);
+
+	pm_runtime_enable(dev->dev);
+
+	r = pm_runtime_get_sync(dev->dev);
+	if (r < 0) {
+		dev_err(dev->dev, "failed to runtime_get device: %d\n", r);
+		pm_runtime_put_noidle(dev->dev);
+		return r;
 	}
 
 	i2c_davinci_init(dev);
@@ -849,27 +879,40 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	if (r)
 		goto err_unuse_clocks;
 
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
+
 	return 0;
 
 err_unuse_clocks:
-	clk_disable_unprepare(dev->clk);
-	dev->clk = NULL;
+	pm_runtime_dont_use_autosuspend(dev->dev);
+	pm_runtime_put_sync(dev->dev);
+	pm_runtime_disable(dev->dev);
+
 	return r;
 }
 
 static int davinci_i2c_remove(struct platform_device *pdev)
 {
 	struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
+	int ret;
 
 	i2c_davinci_cpufreq_deregister(dev);
 
 	i2c_del_adapter(&dev->adapter);
 
-	clk_disable_unprepare(dev->clk);
-	dev->clk = NULL;
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		return ret;
+	}
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
 
+	pm_runtime_dont_use_autosuspend(dev->dev);
+	pm_runtime_put_sync(dev->dev);
+	pm_runtime_disable(dev->dev);
+
 	return 0;
 }
 
@@ -880,7 +923,6 @@ static int davinci_i2c_suspend(struct device *dev)
 
 	/* put I2C into reset */
 	davinci_i2c_reset_ctrl(i2c_dev, 0);
-	clk_disable_unprepare(i2c_dev->clk);
 
 	return 0;
 }
@@ -889,7 +931,6 @@ static int davinci_i2c_resume(struct device *dev)
 {
 	struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
-	clk_prepare_enable(i2c_dev->clk);
 	/* take I2C out of reset */
 	davinci_i2c_reset_ctrl(i2c_dev, 1);
 
@@ -899,6 +940,8 @@ static int davinci_i2c_resume(struct device *dev)
 static const struct dev_pm_ops davinci_i2c_pm = {
 	.suspend        = davinci_i2c_suspend,
 	.resume         = davinci_i2c_resume,
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
 };
 
 #define davinci_i2c_pm_ops (&davinci_i2c_pm)
-- 
2.9.4.dirty

  reply	other threads:[~2017-09-11 20:13 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-11 20:11 [PATCH v4 0/2] i2c: davinci: Add PM Runtime Support needed by 66AK2G Franklin S Cooper Jr
2017-09-11 20:11 ` Franklin S Cooper Jr [this message]
2017-09-12  1:58   ` [PATCH v4 1/2] i2c: davinci: Add PM Runtime Support Baolin Wang
     [not found]     ` <CAMz4kuLGVes6a4iCF0VbG1ErWPR5at=HKgeGv3cMr1zv7aLzJg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-09-12  8:48       ` Sekhar Nori
2017-09-12  9:14         ` Baolin Wang
2017-09-12  9:22           ` Sekhar Nori
     [not found]   ` <20170911201145.31257-2-fcooper-l0cyMroinI0@public.gmane.org>
2017-10-17 21:46     ` Wolfram Sang
     [not found] ` <20170911201145.31257-1-fcooper-l0cyMroinI0@public.gmane.org>
2017-09-11 20:11   ` [PATCH v4 2/2] dt-bindings: i2c: i2c-davinci: Update binding for 66AK2Gx pwr dm property Franklin S Cooper Jr
     [not found]     ` <20170911201145.31257-3-fcooper-l0cyMroinI0@public.gmane.org>
2017-10-17 21:46       ` Wolfram Sang
2017-09-18 15:58 ` [PATCH v4 0/2] i2c: davinci: Add PM Runtime Support needed by 66AK2G Sekhar Nori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170911201145.31257-2-fcooper@ti.com \
    --to=fcooper@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).