From: Rob Herring <robh@kernel.org>
To: Todor Tomov <todor.tomov@linaro.org>
Cc: wsa@the-dreams.de, linux-i2c@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver
Date: Tue, 17 Oct 2017 17:21:28 -0500 [thread overview]
Message-ID: <20171017222128.eg256eba4ufqjsus@rob-hp-laptop> (raw)
In-Reply-To: <1507892203-17033-2-git-send-email-todor.tomov@linaro.org>
gOn Fri, Oct 13, 2017 at 01:56:40PM +0300, Todor Tomov wrote:
> Add DT binding document for Qualcomm Camera Control Interface driver
>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: Mark Rutland <mark.rutland@arm.com>
> CC: devicetree@vger.kernel.org
> Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
> ---
> .../devicetree/bindings/i2c/i2c-qcom-cci.txt | 46 ++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> new file mode 100644
> index 0000000..cb1fe15
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> @@ -0,0 +1,46 @@
> +Qualcomm Camera Control Interface controller
> +
> +Required properties:
> + - compatible: Should be one of:
> + - "qcom,cci-v1.0.8" for 8916;
> + - "qcom,cci-v1.4.0" for 8996.
Does using version numbers really buy anything over using SoC names?
> + - #address-cells: Should be <1>.
> + - #size-cells: Should be <0>.
> + - reg: Base address of the controller and length of memory mapped region.
> + - interrupts: Specifier for CCI interrupt.
> + - clocks: List of clock specifiers, one for each entry in clock-names.
> + - clock-names: Should contain:
> + - "mmss_mmagic_ahb" - on 8996 only;
> + - "camss_top_ahb";
> + - "cci_ahb";
> + - "cci";
> + - "camss_ahb".
> +
> +Required properties on 8996:
> + - power-domains: Power domain specifier.
> +
> +Optional:
> + - clock-frequency: Desired I2C bus clock frequency in Hz, defaults to 100 kHz
> + if omitted.
I2C freq? The block has an I2C controller? If so, you should explicitly
state that somewhere in here and show a sensor as a child node.
> +
> +Example:
> +
> + cci@a0c000 {
> + compatible = "qcom,cci-v1.4.0";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xa0c000 0x1000>;
> + interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
> + power-domains = <&mmcc CAMSS_GDSC>;
> + clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
> + <&mmcc CAMSS_TOP_AHB_CLK>,
> + <&mmcc CAMSS_CCI_AHB_CLK>,
> + <&mmcc CAMSS_CCI_CLK>,
> + <&mmcc CAMSS_AHB_CLK>;
> + clock-names = "mmss_mmagic_ahb",
> + "camss_top_ahb",
> + "cci_ahb",
> + "cci",
> + "camss_ahb";
> + clock-frequency = <400000>;
> + };
> --
> 2.7.4
>
next prev parent reply other threads:[~2017-10-17 22:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-13 10:56 [PATCH v2 0/4] Qualcomm Camera Control Interface driver Todor Tomov
2017-10-13 10:56 ` [PATCH v2 1/4] dt-bindings: media: Binding document for " Todor Tomov
2017-10-17 22:21 ` Rob Herring [this message]
2017-10-13 10:56 ` [PATCH v2 2/4] i2c: Add " Todor Tomov
2017-10-13 10:56 ` [PATCH v2 3/4] MAINTAINERS: " Todor Tomov
2017-10-13 10:56 ` [PATCH v2 4/4] arm64: dts: qcom: Add Camera Control Interface support Todor Tomov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171017222128.eg256eba4ufqjsus@rob-hp-laptop \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=todor.tomov@linaro.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox