From: Jean Delvare <jdelvare@suse.de>
To: Linux I2C <linux-i2c@vger.kernel.org>
Subject: [PATCH 5/6] decode-dimms: Documentation update for DDR4
Date: Sun, 19 Nov 2017 13:36:48 +0100 [thread overview]
Message-ID: <20171119133648.41e9e1f9@endymion> (raw)
In-Reply-To: <20171119133309.67d4c596@endymion>
The EEPROMs used to store SPD data on DDR4 SDRAM modules have their
own kernel driver: ee1004.
---
eeprom/decode-dimms | 10 +++++++---
eeprom/decode-dimms.1 | 7 ++++---
2 files changed, 11 insertions(+), 6 deletions(-)
--- i2c-tools.orig/eeprom/decode-dimms 2017-11-17 11:27:11.401380668 +0100
+++ i2c-tools/eeprom/decode-dimms 2017-11-17 11:28:32.262363769 +0100
@@ -5,7 +5,7 @@
# Copyright 1998, 1999 Philip Edelbrock <phil@netroedge.com>
# modified by Christian Zuckschwerdt <zany@triq.net>
# modified by Burkart Lingner <burkart@bollchen.de>
-# Copyright (C) 2005-2013 Jean Delvare <jdelvare@suse.de>
+# Copyright (C) 2005-2017 Jean Delvare <jdelvare@suse.de>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -2410,7 +2410,9 @@ sub get_dimm_list
my (@dirs, $dir, $opened, $file, @files);
if ($use_sysfs) {
- @dirs = ('/sys/bus/i2c/drivers/eeprom', '/sys/bus/i2c/drivers/at24');
+ @dirs = ('/sys/bus/i2c/drivers/eeprom',
+ '/sys/bus/i2c/drivers/at24',
+ '/sys/bus/i2c/drivers/ee1004'); # DDR4
} else {
@dirs = ('/proc/sys/dev/sensors');
}
@@ -2428,7 +2430,9 @@ sub get_dimm_list
# or spd (driver at24)
my $attr = sysfs_device_attribute("$dir/$file", "name");
next unless defined $attr &&
- ($attr eq "eeprom" || $attr eq "spd");
+ ($attr eq "eeprom" ||
+ $attr eq "spd" ||
+ $attr eq "ee1004"); # DDR4
} else {
next unless $file =~ /^eeprom-/;
}
--- i2c-tools.orig/eeprom/decode-dimms.1 2017-11-17 11:21:42.505378009 +0100
+++ i2c-tools/eeprom/decode-dimms.1 2017-11-17 11:28:32.262363769 +0100
@@ -1,6 +1,7 @@
.\"
.\" decode-dimms.1 - manpage for the i2c-tools/decode-dimms utility
.\" Copyright (C) 2013 Jaromir Capik
+.\" Copyright (C) 2017 Jean Delvare
.\"
.\" This program is free software; you can redistribute it and/or modify
.\" it under the terms of the GNU General Public License as published by
@@ -16,7 +17,7 @@
.\" with this program; if not, write to the Free Software Foundation, Inc.,
.\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
.\"
-.TH decode-dimms 1 "Oct 2013" "i2c-tools" "User Commands"
+.TH decode-dimms 1 "Nov 2017" "i2c-tools" "User Commands"
.SH NAME
decode-dimms \- decode the information found in memory module SPD EEPROMs
.SH SYNOPSIS
@@ -31,8 +32,8 @@ The purpose of the
.B decode-dimms
tool is to decode the information found in memory module SPD EEPROMs.
The SPD data is read either from the running system or dump files.
-In the former case, the tool requires either the eeprom kernel module
-or the at24 kernel module to be loaded.
+In the former case, the tool requires a kernel module to be loaded:
+eeprom, at24 or ee1004 (for DDR4 SDRAM.)
.SH PARAMETERS
.TP
.B \-f, --format
--
Jean Delvare
SUSE L3 Support
next prev parent reply other threads:[~2017-11-19 12:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-19 12:33 [PATCH 0/6] decode-dimms: Add support for DDR4 SDRAM memory Jean Delvare
2017-11-19 12:33 ` [PATCH 1/6] decode-dimms: Add preliminary DDR4 support Jean Delvare
2017-11-19 12:34 ` [PATCH 2/6] decode-dimms: Decode size and timings of DDR4 Jean Delvare
2017-11-19 12:34 ` [PATCH 3/6] decode-dimms: Decode misc parameters " Jean Delvare
2017-11-19 12:35 ` [PATCH 4/6] decode-dimms: Decode physical characteristics " Jean Delvare
2017-11-19 12:36 ` Jean Delvare [this message]
2017-11-19 12:37 ` [PATCH 6/6] decode-dimms: Verify the CRC of DDR4 data block 1 Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171119133648.41e9e1f9@endymion \
--to=jdelvare@suse.de \
--cc=linux-i2c@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).