From: Arnd Bergmann <arnd@arndb.de>
To: linux-kernel@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>, Wolfram Sang <wsa@the-dreams.de>,
linux-i2c@vger.kernel.org
Subject: [PATCH 35/47] i2c: remove bfin-twi driver
Date: Wed, 14 Mar 2018 16:35:48 +0100 [thread overview]
Message-ID: <20180314153603.3127932-36-arnd@arndb.de> (raw)
In-Reply-To: <20180314153603.3127932-1-arnd@arndb.de>
The blackfin architecture is getting removed, so the
twi driver can also be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/i2c/busses/Kconfig | 18 -
drivers/i2c/busses/Makefile | 1 -
drivers/i2c/busses/i2c-bfin-twi.c | 737 --------------------------------------
3 files changed, 756 deletions(-)
delete mode 100644 drivers/i2c/busses/i2c-bfin-twi.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 68ceac7617ff..4c0895165727 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -445,24 +445,6 @@ config I2C_BRCMSTB
If you do not need I2C interface, say N.
-config I2C_BLACKFIN_TWI
- tristate "Blackfin TWI I2C support"
- depends on BLACKFIN
- depends on !BF561 && !BF531 && !BF532 && !BF533
- help
- This is the I2C bus driver for Blackfin on-chip TWI interface.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-bfin-twi.
-
-config I2C_BLACKFIN_TWI_CLK_KHZ
- int "Blackfin TWI I2C clock (kHz)"
- depends on I2C_BLACKFIN_TWI
- range 21 400
- default 50
- help
- The unit of the TWI clock is kHz.
-
config I2C_CADENCE
tristate "Cadence I2C Controller"
depends on ARCH_ZYNQ || ARM64 || XTENSA
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 2ce8576540a2..9e475a54e36e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o
-obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
deleted file mode 100644
index ff3343186a82..000000000000
--
2.9.0
next prev parent reply other threads:[~2018-03-14 15:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 15:35 [PATCH 00/47] arch-removal: device drivers Arnd Bergmann
2018-03-14 15:35 ` Arnd Bergmann [this message]
2018-03-17 20:19 ` [PATCH 35/47] i2c: remove bfin-twi driver Wolfram Sang
2018-03-14 22:45 ` [PATCH 00/47] arch-removal: device drivers Rafael J. Wysocki
2018-03-15 5:32 ` Boris Brezillon
2018-03-15 9:09 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180314153603.3127932-36-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox