From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Esben Haabendal <esben.haabendal@gmail.com>
Cc: linux-i2c@vger.kernel.org,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Yuan Yao <yao.yuan@freescale.com>, Esben Haabendal <eha@deif.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Phil Reid <preid@electromag.com.au>,
Lucas Stach <l.stach@pengutronix.de>,
Clemens Gruber <clemens.gruber@pqgruber.com>,
Peter Rosin <peda@axentia.se>,
Fabio Estevam <fabio.estevam@nxp.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/4] i2c: imx: Simplify stopped state tracking
Date: Tue, 24 Jul 2018 09:59:19 +0200 [thread overview]
Message-ID: <20180724075919.iyysd7dtbddvbavq@pengutronix.de> (raw)
In-Reply-To: <20180709094304.8814-4-esben.haabendal@gmail.com>
On Mon, Jul 09, 2018 at 11:43:03AM +0200, Esben Haabendal wrote:
> From: Esben Haabendal <eha@deif.com>
>
> Always update the stopped state when busy status have been checked.
> This is identical to what was done before, with the exception of error
> handling.
> Without this change, some errors cause the stopped state to be left in
> incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and
> i2c_imx_xfer().
>
> Signed-off-by: Esben Haabendal <eha@deif.com>
> ---
> drivers/i2c/busses/i2c-imx.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index d86f152176a4..1db8e6790afc 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -421,10 +421,14 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
> return -EAGAIN;
> }
>
> - if (for_busy && (temp & I2SR_IBB))
> + if (for_busy && (temp & I2SR_IBB)) {
> + i2c_imx->stopped = 0;
> break;
> - if (!for_busy && !(temp & I2SR_IBB))
> + }
> + if (!for_busy && !(temp & I2SR_IBB)) {
> + i2c_imx->stopped = 1;
> break;
> + }
Would it make sense to assign to ->stopped independent of for_busy?
> if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
> dev_dbg(&i2c_imx->adapter.dev,
> "<%s> I2C bus is busy\n", __func__);
> @@ -538,7 +542,6 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
> result = i2c_imx_bus_busy(i2c_imx, 1);
> if (result)
> return result;
> - i2c_imx->stopped = 0;
>
> temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
> temp &= ~I2CR_DMAEN;
> @@ -569,7 +572,6 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
>
> if (!i2c_imx->stopped) {
> i2c_imx_bus_busy(i2c_imx, 0);
> - i2c_imx->stopped = 1;
> }
The braces can go away here.
>
> /* Disable I2C controller */
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
next prev parent reply other threads:[~2018-07-24 7:59 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20180709094304.8814-1-esben.haabendal@gmail.com>
2018-07-09 9:43 ` [PATCH v2 1/4] i2c: imx: Fix reinit_completion() use Esben Haabendal
2018-07-23 18:08 ` Wolfram Sang
2018-07-09 9:43 ` [PATCH v2 2/4] i2c: imx: Fix race condition in dma read Esben Haabendal
2018-07-24 7:57 ` Uwe Kleine-König
2018-08-09 11:57 ` Esben Haabendal
2018-07-09 9:43 ` [PATCH v2 3/4] i2c: imx: Simplify stopped state tracking Esben Haabendal
2018-07-24 7:59 ` Uwe Kleine-König [this message]
2018-08-09 12:06 ` Esben Haabendal
2018-08-09 16:26 ` Uwe Kleine-König
2018-08-10 9:25 ` Esben Haabendal
2018-08-10 12:25 ` Uwe Kleine-König
2018-07-09 9:43 ` [PATCH v2 4/4] arm: dts: ls1021a: Enable I2C DMA support Esben Haabendal
2018-07-24 8:02 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180724075919.iyysd7dtbddvbavq@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=clemens.gruber@pqgruber.com \
--cc=eha@deif.com \
--cc=esben.haabendal@gmail.com \
--cc=fabio.estevam@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=peda@axentia.se \
--cc=preid@electromag.com.au \
--cc=robh+dt@kernel.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=yao.yuan@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).