From: Esben Haabendal <esben.haabendal@gmail.com>
To: linux-i2c@vger.kernel.org
Cc: "Esben Haabendal" <eha@deif.com>,
"Wolfram Sang" <wsa+renesas@sang-engineering.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Fabio Estevam" <fabio.estevam@nxp.com>,
"Wei Jinhua" <wei.jinhua1@zte.com.cn>,
"Phil Reid" <preid@electromag.com.au>,
"Peter Rosin" <peda@axentia.se>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/3] i2c: imx: Simplify stopped state tracking
Date: Thu, 9 Aug 2018 14:32:06 +0200 [thread overview]
Message-ID: <20180809123207.9732-3-esben.haabendal@gmail.com> (raw)
In-Reply-To: <20180809123207.9732-1-esben.haabendal@gmail.com>
From: Esben Haabendal <eha@deif.com>
Always update the stopped state when busy status have been checked.
This is identical to what was done before, with the exception of error
handling.
Without this change, some errors cause the stopped state to be left in
incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and
i2c_imx_xfer().
Signed-off-by: Esben Haabendal <eha@deif.com>
---
drivers/i2c/busses/i2c-imx.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index f7bd6c21da27..8fb61691e226 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -421,10 +421,14 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
return -EAGAIN;
}
- if (for_busy && (temp & I2SR_IBB))
+ if (for_busy && (temp & I2SR_IBB)) {
+ i2c_imx->stopped = 0;
break;
- if (!for_busy && !(temp & I2SR_IBB))
+ }
+ if (!for_busy && !(temp & I2SR_IBB)) {
+ i2c_imx->stopped = 1;
break;
+ }
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> I2C bus is busy\n", __func__);
@@ -538,7 +542,6 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
result = i2c_imx_bus_busy(i2c_imx, 1);
if (result)
return result;
- i2c_imx->stopped = 0;
temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
temp &= ~I2CR_DMAEN;
@@ -567,10 +570,8 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
udelay(i2c_imx->disable_delay);
}
- if (!i2c_imx->stopped) {
+ if (!i2c_imx->stopped)
i2c_imx_bus_busy(i2c_imx, 0);
- i2c_imx->stopped = 1;
- }
/* Disable I2C controller */
temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
@@ -724,7 +725,6 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
temp &= ~(I2CR_MSTA | I2CR_MTX);
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
i2c_imx_bus_busy(i2c_imx, 0);
- i2c_imx->stopped = 1;
} else {
/*
* For i2c master receiver repeat restart operation like:
@@ -849,7 +849,6 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
temp &= ~(I2CR_MSTA | I2CR_MTX);
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
i2c_imx_bus_busy(i2c_imx, 0);
- i2c_imx->stopped = 1;
} else {
/*
* For i2c master receiver repeat restart operation like:
--
2.18.0
next prev parent reply other threads:[~2018-08-09 12:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20180809123207.9732-1-esben.haabendal@gmail.com>
2018-08-09 12:32 ` [PATCH v3 1/3] i2c: imx: Fix race condition in dma read Esben Haabendal
2018-08-16 8:27 ` Uwe Kleine-König
2018-08-09 12:32 ` Esben Haabendal [this message]
2018-08-16 8:23 ` [PATCH v3 2/3] i2c: imx: Simplify stopped state tracking Uwe Kleine-König
2018-08-09 12:32 ` [PATCH v3 3/3] arm: dts: ls1021a: Enable I2C DMA support Esben Haabendal
2018-08-27 6:51 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180809123207.9732-3-esben.haabendal@gmail.com \
--to=esben.haabendal@gmail.com \
--cc=eha@deif.com \
--cc=fabio.estevam@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=preid@electromag.com.au \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wei.jinhua1@zte.com.cn \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).