[RFC PATCH 1/4] i2c: core: remove outdated DEBUG output

[Wolfram Sang <wsa+renesas@sang-engineering.com>]

The usefulness of this debug output is questionable. It covers only
direct i2c_transfer calls and no SMBUS calls, neither direct nor
emulated ones. And the latter one is largely used in the kernel, so a
lot of stuff is missed. Also, we have a proper tracing mechanism for all
these kinds of transfers in place for years now. Remove this old one.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/i2c-core-base.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 9ee9a15e7134..c2b352c46fae 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1940,16 +1940,6 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	 */
 
 	if (adap->algo->master_xfer) {
-#ifdef DEBUG
-		for (ret = 0; ret < num; ret++) {
-			dev_dbg(&adap->dev,
-				"master_xfer[%d] %c, addr=0x%02x, len=%d%s\n",
-				ret, (msgs[ret].flags & I2C_M_RD) ? 'R' : 'W',
-				msgs[ret].addr, msgs[ret].len,
-				(msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
-		}
-#endif
-
 		if (in_atomic() || irqs_disabled()) {
 			ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
 			if (!ret)
-- 
2.18.0