From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH] i2c: brcmstb: Allow enabling the driver on DSL SoCs Date: Fri, 28 Sep 2018 15:39:44 -0700 Message-ID: <20180928223947.20751-1-f.fainelli@gmail.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: kdasu.kdev@gmail.com, Florian Fainelli , Wolfram Sang , Jarkko Nikula , Jean Delvare , Andy Shevchenko , M'boumba Cedric Madianga , Karthikeyan Ramasubramanian , Geert Uytterhoeven , Pierre-Yves MORDRET , Eddie James , Ard Biesheuvel , Manivannan Sadhasivam , Arnd Bergmann , Heikki Krogerus , "open list:I2C SUBSYSTEM HOST DRIVERS" List-Id: linux-i2c@vger.kernel.org ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the same controller, make it possible to select the STB driver and update the Kconfig and help text a bit. Signed-off-by: Florian Fainelli --- drivers/i2c/busses/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 451d4ae50e66..fc3fd987f718 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -432,12 +432,13 @@ config I2C_BCM_KONA If you do not need KONA I2C interface, say N. config I2C_BRCMSTB - tristate "BRCM Settop I2C controller" - depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + tristate "BRCM Settop/DSL I2C controller" + depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST || \ + ARCH_BCM_63XX default y help If you say yes to this option, support will be included for the - I2C interface on the Broadcom Settop SoCs. + I2C interface on the Broadcom Settop/DSL SoCs. If you do not need I2C interface, say N. -- 2.17.1