From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH v2] i2c: brcmstb: Allow enabling the driver on DSL SoCs Date: Mon, 1 Oct 2018 10:43:47 -0700 Message-ID: <20181001174349.26357-1-f.fainelli@gmail.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: kdasu.kdev@gmail.com, geert@linux-m68k.org, Florian Fainelli , Wolfram Sang , Jarkko Nikula , Jean Delvare , Andy Shevchenko , Karthikeyan Ramasubramanian , Manivannan Sadhasivam , Eddie James , James Hogan , Arnd Bergmann , Ard Biesheuvel , Heikki Krogerus , "open list:I2C SUBSYSTEM HOST DRIVERS" List-Id: linux-i2c@vger.kernel.org ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the same controller, make it possible to select the STB driver and update the Kconfig and help text a bit. Signed-off-by: Florian Fainelli --- Changes in v2: - Make COMPILE_TEST last, as per Geert's recommendation drivers/i2c/busses/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 451d4ae50e66..56ccb1ea7da5 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -432,12 +432,13 @@ config I2C_BCM_KONA If you do not need KONA I2C interface, say N. config I2C_BRCMSTB - tristate "BRCM Settop I2C controller" - depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + tristate "BRCM Settop/DSL I2C controller" + depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \ + COMPILE_TEST default y help If you say yes to this option, support will be included for the - I2C interface on the Broadcom Settop SoCs. + I2C interface on the Broadcom Settop/DSL SoCs. If you do not need I2C interface, say N. -- 2.17.1