* [PATCH 1/2] dt-bindings: i2c: sun6i-p2wi: Add YAML schemas @ 2019-05-25 14:18 Maxime Ripard 2019-05-25 14:18 ` [PATCH 2/2] dt-bindings: i2c: mv64xxx: " Maxime Ripard 0 siblings, 1 reply; 4+ messages in thread From: Maxime Ripard @ 2019-05-25 14:18 UTC (permalink / raw) To: Wolfram Sang, Mark Rutland, Rob Herring, Frank Rowand, Chen-Yu Tsai, Maxime Ripard Cc: devicetree, linux-i2c, linux-arm-kernel Switch the DT binding to a YAML schema to enable the DT validation. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- .../i2c/allwinner,sun6i-a31-p2wi.yaml | 71 +++++++++++++++++++ .../bindings/i2c/i2c-sun6i-p2wi.txt | 41 ----------- 2 files changed, 71 insertions(+), 41 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml new file mode 100644 index 000000000000..780a33080140 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + compatible: + const: allwinner,sun6i-a31-p2wi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + clock-frequency: + minimum: 1 + maximum: 6000000 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +examples: + - | + p2wi@1f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = <0 39 4>; + clocks = <&apb0_gates 3>; + clock-frequency = <6000000>; + resets = <&apb0_rst 3>; + #address-cells = <1>; + #size-cells = <0>; + + axp221: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt deleted file mode 100644 index 49df0053347a..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt +++ /dev/null @@ -1,41 +0,0 @@ - -* Allwinner P2WI (Push/Pull 2 Wire Interface) controller - -Required properties : - - - reg : Offset and length of the register set for the device. - - compatible : Should one of the following: - - "allwinner,sun6i-a31-p2wi" - - interrupts : The interrupt line connected to the P2WI peripheral. - - clocks : The gate clk connected to the P2WI peripheral. - - resets : The reset line connected to the P2WI peripheral. - -Optional properties : - - - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the -default frequency is 100kHz - -A P2WI may contain one child node encoding a P2WI slave device. - -Slave device properties: - Required properties: - - reg : the I2C slave address used during the initialization - process to switch from I2C to P2WI mode - -Example: - - p2wi@1f03400 { - compatible = "allwinner,sun6i-a31-p2wi"; - reg = <0x01f03400 0x400>; - interrupts = <0 39 4>; - clocks = <&apb0_gates 3>; - clock-frequency = <6000000>; - resets = <&apb0_rst 3>; - - axp221: pmic@68 { - compatible = "x-powers,axp221"; - reg = <0x68>; - - /* ... */ - }; - }; -- 2.21.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] dt-bindings: i2c: mv64xxx: Add YAML schemas 2019-05-25 14:18 [PATCH 1/2] dt-bindings: i2c: sun6i-p2wi: Add YAML schemas Maxime Ripard @ 2019-05-25 14:18 ` Maxime Ripard 2019-06-03 14:56 ` Gregory CLEMENT 0 siblings, 1 reply; 4+ messages in thread From: Maxime Ripard @ 2019-05-25 14:18 UTC (permalink / raw) To: Wolfram Sang, Mark Rutland, Rob Herring, Frank Rowand, Chen-Yu Tsai, Maxime Ripard Cc: devicetree, linux-i2c, linux-arm-kernel Switch the DT binding to a YAML schema to enable the DT validation. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- .../devicetree/bindings/i2c/i2c-mv64xxx.txt | 64 ----------- .../bindings/i2c/marvell,mv64xxx-i2c.yaml | 106 ++++++++++++++++++ 2 files changed, 106 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt create mode 100644 Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt deleted file mode 100644 index 0ffe65a316ae..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +++ /dev/null @@ -1,64 +0,0 @@ - -* Marvell MV64XXX I2C controller - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible : Should be either: - - "allwinner,sun4i-a10-i2c" - - "allwinner,sun6i-a31-i2c" - - "marvell,mv64xxx-i2c" - - "marvell,mv78230-i2c" - - "marvell,mv78230-a0-i2c" - * Note: Only use "marvell,mv78230-a0-i2c" for a - very rare, initial version of the SoC which - had broken offload support. Linux - auto-detects this and sets it appropriately. - - interrupts : The interrupt number - -Optional properties : - - - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the -default frequency is 100kHz - - - resets : phandle to the parent reset controller. Mandatory - whenever you're using the "allwinner,sun6i-a31-i2c" - compatible. - - - clocks: : pointers to the reference clocks for this device, the - first one is the one used for the clock on the i2c bus, - the second one is the clock used to acces the registers - of the controller - - - clock-names : names of used clocks, mandatory if the second clock is - used, the name must be "core", and "reg" (the latter is - only for Armada 7K/8K). - -Examples: - - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - interrupts = <29>; - clock-frequency = <100000>; - }; - -For the Armada XP: - - i2c@11000 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - interrupts = <29>; - clock-frequency = <100000>; - }; - -For the Armada 7040: - - i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - interrupts = <29>; - clock-frequency = <100000>; - clock-names = "core", "reg"; - clocks = <&core_clock>, <®_clock>; - }; diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml new file mode 100644 index 000000000000..984c01dccc37 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV64XXX I2C Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-i2c + - items: + - const: allwinner,sun7i-a20-i2c + - const: allwinner,sun4i-a10-i2c + - const: allwinner,sun6i-a31-i2c + - items: + - const: allwinner,sun8i-a23-i2c + - const: allwinner,sun6i-a31-i2c + - items: + - const: allwinner,sun8i-a83t-i2c + - const: allwinner,sun6i-a31-i2c + - items: + - const: allwinner,sun50i-a64-i2c + - const: allwinner,sun6i-a31-i2c + + - const: marvell,mv64xxx-i2c + - const: marvell,mv78230-i2c + - const: marvell,mv78230-a0-i2c + + description: + Only use "marvell,mv78230-a0-i2c" for a very rare, initial + version of the SoC which had broken offload support. Linux + auto-detects this and sets it appropriately. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + items: + - description: Reference clock for the I2C bus + - description: Bus clock (Only for Armada 7K/8K) + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: core + - const: reg + description: + Mandatory if two clocks are used (only for Armada 7k and 8k). + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-i2c + - allwinner,sun6i-a31-i2c + + then: + required: + - clocks + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-i2c + + then: + required: + - resets + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +examples: + - | + timer { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x400>; + interrupts = <22>; + clocks = <&osc>; + }; +... -- 2.21.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] dt-bindings: i2c: mv64xxx: Add YAML schemas 2019-05-25 14:18 ` [PATCH 2/2] dt-bindings: i2c: mv64xxx: " Maxime Ripard @ 2019-06-03 14:56 ` Gregory CLEMENT 2019-06-05 12:11 ` Maxime Ripard 0 siblings, 1 reply; 4+ messages in thread From: Gregory CLEMENT @ 2019-06-03 14:56 UTC (permalink / raw) To: Maxime Ripard, Wolfram Sang, Mark Rutland, Rob Herring, Frank Rowand, Chen-Yu Tsai Cc: devicetree, linux-i2c, linux-arm-kernel Hi, > Switch the DT binding to a YAML schema to enable the DT validation. > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> > --- > .../devicetree/bindings/i2c/i2c-mv64xxx.txt | 64 ----------- > .../bindings/i2c/marvell,mv64xxx-i2c.yaml | 106 ++++++++++++++++++ > 2 files changed, 106 insertions(+), 64 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt > create mode 100644 Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt > deleted file mode 100644 > index 0ffe65a316ae..000000000000 > --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt > +++ /dev/null > @@ -1,64 +0,0 @@ > - > -* Marvell MV64XXX I2C controller > - > -Required properties : > - > - - reg : Offset and length of the register set for the device > - - compatible : Should be either: > - - "allwinner,sun4i-a10-i2c" > - - "allwinner,sun6i-a31-i2c" > - - "marvell,mv64xxx-i2c" > - - "marvell,mv78230-i2c" > - - "marvell,mv78230-a0-i2c" > - * Note: Only use "marvell,mv78230-a0-i2c" for a > - very rare, initial version of the SoC which > - had broken offload support. Linux > - auto-detects this and sets it appropriately. > - - interrupts : The interrupt number > - > -Optional properties : > - > - - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the > -default frequency is 100kHz > - > - - resets : phandle to the parent reset controller. Mandatory > - whenever you're using the "allwinner,sun6i-a31-i2c" > - compatible. > - > - - clocks: : pointers to the reference clocks for this device, the > - first one is the one used for the clock on the i2c bus, > - the second one is the clock used to acces the registers > - of the controller > - > - - clock-names : names of used clocks, mandatory if the second clock is > - used, the name must be "core", and "reg" (the latter is > - only for Armada 7K/8K). > - > -Examples: > - > - i2c@11000 { > - compatible = "marvell,mv64xxx-i2c"; > - reg = <0x11000 0x20>; > - interrupts = <29>; > - clock-frequency = <100000>; > - }; > - > -For the Armada XP: > - > - i2c@11000 { > - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; > - reg = <0x11000 0x100>; > - interrupts = <29>; > - clock-frequency = <100000>; > - }; > - > -For the Armada 7040: > - > - i2c@701000 { > - compatible = "marvell,mv78230-i2c"; > - reg = <0x701000 0x20>; > - interrupts = <29>; > - clock-frequency = <100000>; > - clock-names = "core", "reg"; > - clocks = <&core_clock>, <®_clock>; > - }; > diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml > new file mode 100644 > index 000000000000..984c01dccc37 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml > @@ -0,0 +1,106 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Marvell MV64XXX I2C Controller Device Tree Bindings > + > +maintainers: > + - Chen-Yu Tsai <wens@csie.org> > + - Maxime Ripard <maxime.ripard@bootlin.com> If you take over the maintenanceship and became maintainer for this driver, then update the MAINTAINERS files too. For now it was assigned to me, but I don't mind letting this for both of you. Actually I gave my acked-by to a patch from Wolfram adding the Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt file to the "I2C MV64XXX MARVELL AND ALLWINNER DRIVER" entry "MAINTAINERS: add DT bindings to i2c-mv64xxx" so I guess this patch have to be discarded or at least updated. Gregory > + > +properties: > + compatible: > + oneOf: > + - const: allwinner,sun4i-a10-i2c > + - items: > + - const: allwinner,sun7i-a20-i2c > + - const: allwinner,sun4i-a10-i2c > + - const: allwinner,sun6i-a31-i2c > + - items: > + - const: allwinner,sun8i-a23-i2c > + - const: allwinner,sun6i-a31-i2c > + - items: > + - const: allwinner,sun8i-a83t-i2c > + - const: allwinner,sun6i-a31-i2c > + - items: > + - const: allwinner,sun50i-a64-i2c > + - const: allwinner,sun6i-a31-i2c > + > + - const: marvell,mv64xxx-i2c > + - const: marvell,mv78230-i2c > + - const: marvell,mv78230-a0-i2c > + > + description: > + Only use "marvell,mv78230-a0-i2c" for a very rare, initial > + version of the SoC which had broken offload support. Linux > + auto-detects this and sets it appropriately. > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 2 > + items: > + - description: Reference clock for the I2C bus > + - description: Bus clock (Only for Armada 7K/8K) > + > + clock-names: > + minItems: 1 > + maxItems: 2 > + items: > + - const: core > + - const: reg > + description: > + Mandatory if two clocks are used (only for Armada 7k and 8k). > + > + resets: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + > +allOf: > + - $ref: /schemas/i2c/i2c-controller.yaml# > + - if: > + properties: > + compatible: > + contains: > + enum: > + - allwinner,sun4i-a10-i2c > + - allwinner,sun6i-a31-i2c > + > + then: > + required: > + - clocks > + > + - if: > + properties: > + compatible: > + contains: > + const: allwinner,sun6i-a31-i2c > + > + then: > + required: > + - resets > + > +# FIXME: We should set it, but it would report all the generic > +# properties as additional properties. > +# additionalProperties: false > + > +examples: > + - | > + timer { > + compatible = "allwinner,sun4i-a10-timer"; > + reg = <0x01c20c00 0x400>; > + interrupts = <22>; > + clocks = <&osc>; > + }; > +... > -- > 2.21.0 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] dt-bindings: i2c: mv64xxx: Add YAML schemas 2019-06-03 14:56 ` Gregory CLEMENT @ 2019-06-05 12:11 ` Maxime Ripard 0 siblings, 0 replies; 4+ messages in thread From: Maxime Ripard @ 2019-06-05 12:11 UTC (permalink / raw) To: Gregory CLEMENT Cc: Mark Rutland, devicetree, Wolfram Sang, Chen-Yu Tsai, Rob Herring, linux-i2c, Frank Rowand, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 1218 bytes --] Hi, On Mon, Jun 03, 2019 at 04:56:48PM +0200, Gregory CLEMENT wrote: > > +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml > > @@ -0,0 +1,106 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Marvell MV64XXX I2C Controller Device Tree Bindings > > + > > +maintainers: > > + - Chen-Yu Tsai <wens@csie.org> > > + - Maxime Ripard <maxime.ripard@bootlin.com> > > If you take over the maintenanceship and became maintainer for this > driver, then update the MAINTAINERS files too. For now it was assigned > to me, but I don't mind letting this for both of you. > > Actually I gave my acked-by to a patch from Wolfram adding the > Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt file to the "I2C > MV64XXX MARVELL AND ALLWINNER DRIVER" entry "MAINTAINERS: add DT > bindings to i2c-mv64xxx" so I guess this patch have to be discarded or > at least updated. Sorry for that, it's definitely not intentional. I'll fix it and resend. Thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-06-05 12:11 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-05-25 14:18 [PATCH 1/2] dt-bindings: i2c: sun6i-p2wi: Add YAML schemas Maxime Ripard 2019-05-25 14:18 ` [PATCH 2/2] dt-bindings: i2c: mv64xxx: " Maxime Ripard 2019-06-03 14:56 ` Gregory CLEMENT 2019-06-05 12:11 ` Maxime Ripard
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).