[PATCH AUTOSEL 4.19 109/209] i2c: brcmstb: Allow enabling the driver on DSL SoCs

[PATCH AUTOSEL 4.19 109/209] i2c: brcmstb: Allow enabling the driver on DSL SoCs

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit e1eba2ea54a2de0e4c58d87270d25706bb77b844 ]

ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the
same controller, make it possible to select the STB driver and update
the Kconfig and help text a bit.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/Kconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8f803812ea244..ee6dd1b84fac8 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -433,12 +433,13 @@ config I2C_BCM_KONA
 	  If you do not need KONA I2C interface, say N.
 
 config I2C_BRCMSTB
-	tristate "BRCM Settop I2C controller"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	tristate "BRCM Settop/DSL I2C controller"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
+		   COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
-	  I2C interface on the Broadcom Settop SoCs.
+	  I2C interface on the Broadcom Settop/DSL SoCs.
 
 	  If you do not need I2C interface, say N.
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 116/209] i2c: omap: use core to detect 'no zero length' quirk

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit f37b2bb6ac3e6ebf855d9d4f05cc6932a8e5b463 ]

And don't reimplement in the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-omap.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2ac86096ddd95..cd9c65f3d404f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -661,9 +661,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	dev_dbg(omap->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 		msg->addr, msg->len, msg->flags, stop);
 
-	if (msg->len == 0)
-		return -EINVAL;
-
 	omap->receiver = !!(msg->flags & I2C_M_RD);
 	omap_i2c_resize_fifo(omap, msg->len, omap->receiver);
 
@@ -1179,6 +1176,10 @@ static const struct i2c_algorithm omap_i2c_algo = {
 	.functionality	= omap_i2c_func,
 };
 
+static const struct i2c_adapter_quirks omap_i2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
+};
+
 #ifdef CONFIG_OF
 static struct omap_i2c_bus_platform_data omap2420_pdata = {
 	.rev = OMAP_I2C_IP_VERSION_1,
@@ -1453,6 +1454,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	adap->class = I2C_CLASS_DEPRECATED;
 	strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
 	adap->algo = &omap_i2c_algo;
+	adap->quirks = &omap_i2c_quirks;
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 	adap->bus_recovery_info = &omap_i2c_bus_recovery_info;
-- 
2.20.1

[PATCH AUTOSEL 4.19 117/209] i2c: qup: use core to detect 'no zero length' quirk

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit de82bb431855580ad659bfed3e858bd9dd12efd0 ]

And don't reimplement in the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-qup.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index c86c3ae1318f2..e09cd0775ae91 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -1088,11 +1088,6 @@ static int qup_i2c_xfer(struct i2c_adapter *adap,
 	writel(I2C_MINI_CORE | I2C_N_VAL, qup->base + QUP_CONFIG);
 
 	for (idx = 0; idx < num; idx++) {
-		if (msgs[idx].len == 0) {
-			ret = -EINVAL;
-			goto out;
-		}
-
 		if (qup_i2c_poll_state_i2c_master(qup)) {
 			ret = -EIO;
 			goto out;
@@ -1520,9 +1515,6 @@ qup_i2c_determine_mode_v2(struct qup_i2c_dev *qup,
 
 	/* All i2c_msgs should be transferred using either dma or cpu */
 	for (idx = 0; idx < num; idx++) {
-		if (msgs[idx].len == 0)
-			return -EINVAL;
-
 		if (msgs[idx].flags & I2C_M_RD)
 			max_rx_len = max_t(unsigned int, max_rx_len,
 					   msgs[idx].len);
@@ -1636,9 +1628,14 @@ static const struct i2c_algorithm qup_i2c_algo_v2 = {
  * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
  */
 static const struct i2c_adapter_quirks qup_i2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
 	.max_read_len = QUP_READ_LIMIT,
 };
 
+static const struct i2c_adapter_quirks qup_i2c_quirks_v2 = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
+};
+
 static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
 {
 	clk_prepare_enable(qup->clk);
@@ -1701,6 +1698,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
 		is_qup_v1 = true;
 	} else {
 		qup->adap.algo = &qup_i2c_algo_v2;
+		qup->adap.quirks = &qup_i2c_quirks_v2;
 		is_qup_v1 = false;
 		if (acpi_match_device(qup_i2c_acpi_match, qup->dev))
 			goto nodma;
-- 
2.20.1

[PATCH AUTOSEL 4.19 118/209] i2c: tegra: use core to detect 'no zero length' quirk

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit c96c0f2683804b710531e7b754dcd02b5ded6d4a ]

And don't reimplement in the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-tegra.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index ef13b6ce9d8de..47d196c026ba6 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -684,9 +684,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 
 	tegra_i2c_flush_fifos(i2c_dev);
 
-	if (msg->len == 0)
-		return -EINVAL;
-
 	i2c_dev->msg_buf = msg->buf;
 	i2c_dev->msg_buf_remaining = msg->len;
 	i2c_dev->msg_err = I2C_ERR_NONE;
@@ -831,6 +828,7 @@ static const struct i2c_algorithm tegra_i2c_algo = {
 
 /* payload size is only 12 bit */
 static const struct i2c_adapter_quirks tegra_i2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
 	.max_read_len = 4096,
 	.max_write_len = 4096 - 12,
 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 119/209] i2c: zx2967: use core to detect 'no zero length' quirk

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit e2115ace4196bcd2126446fb874bcfc90cba79be ]

And don't reimplement in the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-zx2967.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c
index 48281c1b30c6d..b8f9e020d80e6 100644
--- a/drivers/i2c/busses/i2c-zx2967.c
+++ b/drivers/i2c/busses/i2c-zx2967.c
@@ -281,9 +281,6 @@ static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c,
 	int ret;
 	int i;
 
-	if (msg->len == 0)
-		return -EINVAL;
-
 	zx2967_i2c_flush_fifos(i2c);
 
 	i2c->cur_trans = msg->buf;
@@ -498,6 +495,10 @@ static const struct i2c_algorithm zx2967_i2c_algo = {
 	.functionality = zx2967_i2c_func,
 };
 
+static const struct i2c_adapter_quirks zx2967_i2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
+};
+
 static const struct of_device_id zx2967_i2c_of_match[] = {
 	{ .compatible = "zte,zx296718-i2c", },
 	{ },
@@ -568,6 +569,7 @@ static int zx2967_i2c_probe(struct platform_device *pdev)
 	strlcpy(i2c->adap.name, "zx2967 i2c adapter",
 		sizeof(i2c->adap.name));
 	i2c->adap.algo = &zx2967_i2c_algo;
+	i2c->adap.quirks = &zx2967_i2c_quirks;
 	i2c->adap.nr = pdev->id;
 	i2c->adap.dev.parent = &pdev->dev;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
-- 
2.20.1