From mboxrd@z Thu Jan 1 00:00:00 1970 From: Khouloud Touil Subject: [PATCH v4 3/5] dt-bindings: at24: make wp-gpios a reference to the property defined by nvmem Date: Tue, 7 Jan 2020 10:29:20 +0100 Message-ID: <20200107092922.18408-4-ktouil@baylibre.com> References: <20200107092922.18408-1-ktouil@baylibre.com> Return-path: In-Reply-To: <20200107092922.18408-1-ktouil@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: bgolaszewski@baylibre.com, robh+dt@kernel.org, mark.rutland@arm.com, srinivas.kandagatla@linaro.org, baylibre-upstreaming@groups.io Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-i2c@vger.kernel.org, linus.walleij@linaro.org, Khouloud Touil List-Id: linux-i2c@vger.kernel.org NVMEM framework is an interface for the at24 EEPROMs as well as for other drivers, instead of passing the wp-gpios over the different drivers each time, it would be better to pass it over the NVMEM subsystem once and for all. Making wp-gpios a reference to the property defined by nvmem. Signed-off-by: Khouloud Touil Reviewed-by: Linus Walleij --- Documentation/devicetree/bindings/eeprom/at24.yaml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index e8778560d966..767959941399 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -145,10 +145,7 @@ properties: over reads to the next slave address. Please consult the manual of your device. - wp-gpios: - description: - GPIO to which the write-protect pin of the chip is connected. - maxItems: 1 + wp-gpios: true address-width: allOf: -- 2.17.1