From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [PATCH 10/26] docs: i2c: i2c-protocol: use proper names for ACK and NACK Date: Mon, 20 Jan 2020 14:50:49 +0100 Message-ID: <20200120145049.32239ee2@endymion> References: <20200105224006.10321-1-luca@lucaceresoli.net> <20200105225012.11701-1-luca@lucaceresoli.net> <20200105225012.11701-10-luca@lucaceresoli.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de ([195.135.220.15]:40258 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726819AbgATNuw (ORCPT ); Mon, 20 Jan 2020 08:50:52 -0500 In-Reply-To: <20200105225012.11701-10-luca@lucaceresoli.net> Sender: linux-i2c-owner@vger.kernel.org List-Id: linux-i2c@vger.kernel.org To: Luca Ceresoli Cc: linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org, Wolfram Sang , Peter Rosin , linux-kernel@vger.kernel.org On Sun, 5 Jan 2020 23:49:56 +0100, Luca Ceresoli wrote: > Use the proper ACK and NACK naming from the I2C specification instead of > "accept" and "reverse accept". > > Signed-off-by: Luca Ceresoli > --- > Documentation/i2c/i2c-protocol.rst | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst > index 66adac3a5afd..9a4ac944cf9d 100644 > --- a/Documentation/i2c/i2c-protocol.rst > +++ b/Documentation/i2c/i2c-protocol.rst > @@ -11,7 +11,7 @@ Key to symbols > S Start condition > P Stop condition > Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0. > -A, NA (1 bit) Accept and reverse accept bit. > +A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit > Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to > get a 10 bit I2C address. > Comm (8 bits) Command byte, a data byte which often selects a register on Reviewed-by: Jean Delvare -- Jean Delvare SUSE L3 Support