From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [PATCH 23/26] docs: i2c: old-module-parameters: fix internal hyperlink Date: Wed, 22 Jan 2020 11:16:25 +0100 Message-ID: <20200122111625.6685b606@endymion> References: <20200105224006.10321-1-luca@lucaceresoli.net> <20200105225012.11701-1-luca@lucaceresoli.net> <20200105225012.11701-23-luca@lucaceresoli.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20200105225012.11701-23-luca@lucaceresoli.net> Sender: linux-doc-owner@vger.kernel.org To: Luca Ceresoli Cc: linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org, Wolfram Sang , Peter Rosin , linux-kernel@vger.kernel.org List-Id: linux-i2c@vger.kernel.org On Sun, 5 Jan 2020 23:50:09 +0100, Luca Ceresoli wrote: > Use ReST syntax so that a proper hyperlink is generated. > > Signed-off-by: Luca Ceresoli > --- > Documentation/i2c/old-module-parameters.rst | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst > index 78a6950e5763..0503d2f0b127 100644 > --- a/Documentation/i2c/old-module-parameters.rst > +++ b/Documentation/i2c/old-module-parameters.rst > @@ -12,8 +12,7 @@ address), "force" (to forcibly attach the driver to a given device) and > With the conversion of the I2C subsystem to the standard device driver > binding model, it became clear that these per-module parameters were no > longer needed, and that a centralized implementation was possible. The new, > -sysfs-based interface is described in the documentation file > -"instantiating-devices", section "Method 4: Instantiate from user-space". > +sysfs-based interface is described in :doc:`instantiating-devices`. I object to removing the reference to the section. I think this is saving the reader some time so it is valuable. > > Below is a mapping from the old module parameters to the new interface. > Reviewed-by: Jean Delvare -- Jean Delvare SUSE L3 Support