[PATCH v1 21/40] i2c: mv64xxx: Use generic definitions for bus frequencies

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

Since we have generic definitions for bus frequencies, let's use them.

Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-mv64xxx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index febb7c7ea72b..e803c6b0a947 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -810,7 +810,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	tclk = clk_get_rate(drv_data->clk);
 
 	if (of_property_read_u32(np, "clock-frequency", &bus_freq))
-		bus_freq = 100000; /* 100kHz by default */
+		bus_freq = I2C_STANDARD_MODE_FREQ; /* 100kHz by default */
 
 	if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") ||
 	    of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
@@ -846,14 +846,14 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
 		drv_data->offload_enabled = true;
 		/* The delay is only needed in standard mode (100kHz) */
-		if (bus_freq <= 100000)
+		if (bus_freq <= I2C_STANDARD_MODE_FREQ)
 			drv_data->errata_delay = true;
 	}
 
 	if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
 		drv_data->offload_enabled = false;
 		/* The delay is only needed in standard mode (100kHz) */
-		if (bus_freq <= 100000)
+		if (bus_freq <= I2C_STANDARD_MODE_FREQ)
 			drv_data->errata_delay = true;
 	}
 
-- 
2.25.0