[PATCH v1 27/40] i2c: rk3x: Use generic definitions for bus frequencies

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

Since we have generic definitions for bus frequencies, let's use them.

Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-rk3x.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 1a33007b03e9..a621f747009b 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -539,9 +539,9 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
  */
 static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
 {
-	if (speed <= 100000)
+	if (speed <= I2C_STANDARD_MODE_FREQ)
 		return &standard_mode_spec;
-	else if (speed <= 400000)
+	else if (speed <= I2C_FAST_MODE_FREQ)
 		return &fast_mode_spec;
 	else
 		return &fast_mode_plus_spec;
@@ -578,8 +578,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
 	int ret = 0;
 
 	/* Only support standard-mode and fast-mode */
-	if (WARN_ON(t->bus_freq_hz > 400000))
-		t->bus_freq_hz = 400000;
+	if (WARN_ON(t->bus_freq_hz > I2C_FAST_MODE_FREQ))
+		t->bus_freq_hz = I2C_FAST_MODE_FREQ;
 
 	/* prevent scl_rate_khz from becoming 0 */
 	if (WARN_ON(t->bus_freq_hz < 1000))
@@ -758,8 +758,8 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 	int ret = 0;
 
 	/* Support standard-mode, fast-mode and fast-mode plus */
-	if (WARN_ON(t->bus_freq_hz > 1000000))
-		t->bus_freq_hz = 1000000;
+	if (WARN_ON(t->bus_freq_hz > I2C_FAST_MODE_PLUS_FREQ))
+		t->bus_freq_hz = I2C_FAST_MODE_PLUS_FREQ;
 
 	/* prevent scl_rate_khz from becoming 0 */
 	if (WARN_ON(t->bus_freq_hz < 1000))
-- 
2.25.0